Scribd
Upload
258 views

Appendix 1 Practical Task

This document contains a practical task form used to evaluate students during their industrial training placement. The form is to be completed by the student's supervisor and assesses the student on 6 criteria over 5 levels from excellent to unsatisfactory. The criteria include technology literacy, effective communication, teamwork, compliance with procedures and regulations, professional ethics, and reporting. The completed form must be returned to the university's industrial training unit by the 18th week of placement.

Uploaded by

zal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
258 views

Appendix 1 Practical Task

This document contains a practical task form used to evaluate students during their industrial training placement. The form is to be completed by the student's supervisor and assesses the student on 6 criteria over 5 levels from excellent to unsatisfactory. The criteria include technology literacy, effective communication, teamwork, compliance with procedures and regulations, professional ethics, and reporting. The completed form must be returned to the university's industrial training unit by the 18th week of placement.

Uploaded by

zal
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

APPENDIX 1

PRACTICAL TASK FORM (40%)


(Evaluation by Industry or Training Organization)

INSTRUCTION: Please rate each item below to reflect students performance.


RATING

Good

Average

Below average

Un satisfactory

REG.NO

Excellent

NAME

PROGRAMME
No

Item

CLO*

TECHNOLOGY LITERACY
(Perform hands-on tasks, usage of tools and equipment, adopt a variety of
technologies, apply the knowledge gained to perform task, show development in
knowledge and skills and/or think creatively and critically)

EFFECTIVE COMMUNICATION
(Ability to acquire and understand information, carry out instructions, analyze linear
and non-linear information, show appropriate non-verbal communication,
communicate with employees at all levels and/or have basic negotiation skills)

TEAMWORK
(Show positive personality traits, participate actively as a member of the team, carry
out tasks in appropriate situations and/or build and maintain good relationships
within the team)

POLICIES, PROCEDURES AND REGULATIONS


D

(Comply with the policies and rules of the organization, job procedures and/or safety
and health regulations)

PROFESSIONAL ETHICS
(Report handed-in on time and verified by the supervisor, work independently with
minimum supervision, attendance, punctuality and/or solve problems by taking the
right action)

REPORTING

(Present ideas and views and/or task reporting (Reflective Journal))

TOTAL
*CLO = Course Learning Outcome. Kindly refer to Industrial Training Guideline (Industry Partner) for details.
http://politeknik.gov.my/webjpp2/industri/files/cover.pdf

Comments/recommendations

To be completed by Students Supervisor


th

By 18 week of training, student must return the form (APPENDIX 1 & 2) to:
UNIT PERHUBUNGAN DAN LATIHAN INDUSTRI
POLITEKNIK TUANKU SULTANAH BAHIYAH
KULIM HI-TECH PARK,
09000 KULIM,
KEDAH DARUL AMAN
TEL: 04-4033333

FAX
04-4032919

Name

Position

Date

Signature :

E-MAIL
[email protected]

Company/organization stamp:

APPENDIX 11
LAMPIRAN

PRACTICAL TASK FORM (40%)


BORANG PENILAIAN PRACTICAL TASK (40%)
(Evaluation by Industry or Training Organization)
(Dinilai oleh organisasi latihan atau industri)

ARAHAN: Sila nilaikan setiap item di bawah berdasarkan skor markah 1 hingga 5 untuk menilai prestasi
pelajar
SKOR MARKAH

CLO*

LEMAH

Item

KURANG
MEMUASKAN

No

SEDERHANA

PROGRAM

BAIK

NO PENDAFTARAN

CEMERLANG

NAMA

CELIK TEKNOLOGI
A

(Melaksanakan tugasan secara hands-on, penggunaan alat dan peralatan,


menyesuaikan diri dengan kepelbagaian teknologi, mengaplikasi pengetahuan dalam
melaksanakan tugas, mempamerkan peningkatan dalam pengetahuan dan
kemahiran serta berfikir secara kreatif dan kritis)

KOMUNIKASI BERKESAN
B

(Berkeupayaan menerima dan memahami maklumat, melaksanakan arahan,


menganalisa maklumat secara langsung dan tidak langsung, berkomunikasi secara
lisan dan bukan lisan yang sesuai dengan semua peringkat kakitangan serta
mempunyai kemahiran asas rundingcara)

KERJA BERPASUKAN
C

(Berpersonaliti positif, melibatkan diri secara aktif dalam pasukan, melaksanakan


tugas dalam situasi yang sesuai serta membina dan mengekalkan hubungan baik
dalam pasukan)

POLISI, PROSEDUR DAN PERATURAN


D

(Mematuhi polisi, peraturan organisasi, prosedur kerja serta arahan keselamatan dan
kesihatan)

ETIKA PROFESIONAL
E

(Menghantar laporan pada masa yang ditetapkan dan disahkan oleh penyelia,
berdikari, rekod kehadiran cemerlang, menepati masa serta berkebolehan
menyelesaikan masalah dengan tindakan yang bijak)

PELAPORAN

(Menyampaikan idea dan pandangan serta melaporkan tugasan)

JUMLAH
*CLO = Course Learning Outcome (Hasil pembelajaran Kursus). Sila rujuk Industrial Training Guideline (Industry
Partner) untuk maklumat lanjut. http://politeknik.gov.my/webjpp2/industri/files/cover.pdf

Komen/Cadangan

Untuk dilengkapkan oleh penyelia:

Sila kembalikan borang yang telah lengkap (LAMPIRAN 1 dan 2)


mulai minggu ke-18 sesi Latihan Industri kepada:
UNIT PERHUBUNGAN DAN LATIHAN INDUSTRI
POLITEKNIK TUANKU SULTANAH BAHIYAH
KULIM HI-TECH PARK,
09000 KULIM,
KEDAH DARUL AMAN
TEL: 04-4033333

Fax
04-4032919
/04-4033033
E-mail
[email protected]

Nama

Jawatan

Tarikh

Tandatangan:
Cop Syarikat/Organisasi:

You might also like