Scribd
Upload
220 views1 page

Ericsson Basic Commands

This document contains commands and parameters for monitoring and configuring radio base station equipment. It includes commands to check cell configuration settings, logical channel status, cell locking status, traffic group configuration, MO status and faults, frequency hopping settings, cabinet reloading, software downloads, and diagnostic tests on transmitters and receivers.

Uploaded by

RicardoJorgeRodriguesRocha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
220 views1 page

Ericsson Basic Commands

This document contains commands and parameters for monitoring and configuring radio base station equipment. It includes commands to check cell configuration settings, logical channel status, cell locking status, traffic group configuration, MO status and faults, frequency hopping settings, cabinet reloading, software downloads, and diagnostic tests on transmitters and receivers.

Uploaded by

RicardoJorgeRodriguesRocha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

ALLIP:ALCAT=EXT;

RLCRP:CELL=g49181;
RLSLP:CELL=XXXXX;
RLSTP:Cell=I760491;
RXTCP:CELL=XXXXX,MOTY=RXOTG;
RXCDP:MO=RXOTG-XX;
RXMSP:MO=RXOTG-XX,SUBORD;
RXMFP:MO=RXOXXX-XX,SUBORD,FAULTY;
RXMFP:MO=RXOcf-XX;
RXASP:MO=RXOTG-xx;

!Todos os externos na BSC!


!Verificar Trafego da cell!
!Verificar Logical Channels!
!Verificar se esta Locked/Halted!
!Ver o TG da cell!
!Verificar estado de tudo no TG!
!Estado do TG!
!to get MO Fault Codes!
!Obter Spare ref.!
!Verifica se tem superviso!

RLCHC:CELL=XXXXX,HOP=OFF;
RLCHC:CELL=XXXXX,HOP=ON;

!Frequency Hopping On / Off!

RLSTC:CELL=XXXXX,STATE=HALTED;
RLSTC:CELL=XXXXX,STATE=ACTIVE;

!Bloquear celula!
!Desbloquear celula!

RXBLI:MO=RXOXX-XX,FORCE;
RXTEI:MO=RXOXX-XX;
RXBLE:MO=RXOXX-XX;

!Bloquear MO!
!Testar MO!
!Desbloquear MO!

RXBLI:MO=RXOXX-XX,SUBORD,FORCE;
RXESE:MO=RXOXX-XX,SUBORD;
RXESI:MO=RXOXX-XX,SUBORD;
RXBLE:MO=RXOXX-XX,SUBORD;

!Bloquear MO e filhos!
!Desligar Servio no MO e filhos!
!Activar Servio no MO e filhos!
!Desbloquear MO e filhos!

RXMOP: MO=RXOTRX-111-0&&-12;
RXMOP:MO=RXORX-58-0;
)!
RLCFP:Cell=g300641;

!verifica quantos TRU tem na cell!


!Ver a diversidade configurada (a/B or AB

RXPLI:MO=RXOTG-?,uc;
RXPLP:MO=RXOTG-??;
tus!
!Ver o DIP!
RXAPP:MO=RXOTG-XX;
RADEP:DEV=RBLT2-XXX;
NTCOP:SNT=ETM2-X;
DTSTP:DIP=RBLTXX;
DTIDP:DIP=RBLTXXX;

!DCHNO=Nr.TRX Ex. 16/86/89 = 3 TRX!


!RELOAD CABINET!
!SW Download sta

!XX=SNTINL!
!CRC= 1 Deactive / 2 Activated!

You might also like