Scribd
Upload
376 views2 pages

Principle of Ac Generator

An AC generator operates on the principles of electromagnetic induction like a DC generator. It generates alternating voltage by rotating either a coil within a magnetic field or a magnetic field within a stationary coil. The induced voltage depends on the number of turns in the coil, the strength of the magnetic field, and the speed of rotation. Specifically, the voltage induced in a rectangular coil rotating in a uniform magnetic field is equal to the maximum voltage multiplied by the sine of the angle of rotation, producing an alternating current and voltage that varies sinusoidally with time.

Uploaded by

ravi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
376 views2 pages

Principle of Ac Generator

An AC generator operates on the principles of electromagnetic induction like a DC generator. It generates alternating voltage by rotating either a coil within a magnetic field or a magnetic field within a stationary coil. The induced voltage depends on the number of turns in the coil, the strength of the magnetic field, and the speed of rotation. Specifically, the voltage induced in a rectangular coil rotating in a uniform magnetic field is equal to the maximum voltage multiplied by the sine of the angle of rotation, producing an alternating current and voltage that varies sinusoidally with time.

Uploaded by

ravi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Principle :

A.C. generators or alternators (as they are usually called) operate on the same fundamental
principles of electromagnetic induction as D.C. generators.
Alternating voltage may be generated by rotating a coil in the magnetic field or by rotating a
magnetic field within a stationary coil. The value of the voltage generated depends onthe number of turns in the coil.
strength of the field.
the speed at which the coil or magnetic field rotates.

Working :
Consider a rectangular coil having N turns and rotating in a uniform magnetic field with an angular
velocity of w radian/second. Maximum flux m is linked with the coil when its plane coincides with
the X-axis. In time t seconds, this coil rotates through an angle q = wt. In this deflected position , the
component of the flux which is perpendicular to the plane of the coil is = m cos wt. Hence flux
linkage at any time are N=Nm cos wt.
According to Faraday's Laws of Electromagnetic Induction, the e.m.f. induced in the coil is given by
the rate of change of flux linkage of the coil. Hence the value of the induced e.m.f. is
e = - d(N)/dt volt

= - N d(m cos wt) / dt volt

= - Nm w(-sin wt) volt

= wNm sin wt volt

= w Nm sin q volt ----------------------- (i)

When the coil turned through 90 i.e. when q = 90, then sin q = 1, hence e has maximum value,
say Em. Therefore from Eq(i) we get

Em = wNm

= w NBmA = 2pfNBmA volt

where Bm = maximum flux density in Wb/m2.

A = Area of the coil in m2.

f = frequency of rotation of the coil in rev/second.

Substituting this value of Em in Eq(i), we get

e = Em sin q = Em sin wt

Similarly, the equation of the induced alternating current is

i = Im sin wt

You might also like