Scribd
Upload
559 views1 page

Singer Engine Numbers 2

This document provides engine specifications for various MG models from 1943 to 1956, including the cylinder count, bore/stroke measurements, rated horsepower, weight in hundredweights, and sample engine and chassis numbers. The engine details are listed by year, model, cylinders, dimensions, horsepower, weight, and sample numbers, with the location of identifying marks noted.

Uploaded by

ringtrev
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
559 views1 page

Singer Engine Numbers 2

This document provides engine specifications for various MG models from 1943 to 1956, including the cylinder count, bore/stroke measurements, rated horsepower, weight in hundredweights, and sample engine and chassis numbers. The engine details are listed by year, model, cylinders, dimensions, horsepower, weight, and sample numbers, with the location of identifying marks noted.

Uploaded by

ringtrev
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

YEAR MODEL Cyl Bore/Stroke Rated HP WEIGHT CWT Sample Engine Position of Engine No Sample Position of chassis No

Tourer Sedan numbers Chassis No


1943 Nine 4 60x95mm 9 15 A5308H
1946 10 4 63x95mm 9.8 20 B185Q RH side front dumbiron
1946 4 68x105mm 11.4 24 1C954
1947 Nine 4 60x95mm 8.9 15 A581Q
1947 10 4 63.2x95mm 9.9 17 B1104Q-B1701Q
1947 Nine 4 60x95mm 8.9 15 A766R
1947 10 4 63.2x95mm 9.9 19 B5126R
1948 Nine 4 60x95mm 8.9 15 A646Q-A678R-A1704S
1948 10 4 63.2x95mm 9.9 19 B6255R-B2407Q-B3921
1948 12 4 68x105mm 11.4 22 C484R-C461R-C940S
1948 10 4 9.9 17 B10099S
1949 Nine 4 60x95mm 8.9 15 A2841T
1949 10 4 63.25x95mm 9.9 B10422S RH side of flywheel Hsg B10149S Dumbiron RH side
1949 12 4 68x105mm 11.9 C232Q RH side of timing case casting C333R Plate on bulkhead
1949 SM1500 4 73x90mm 13.2 D1138S-D1005T On flywheel Hsg RH side D113S-D1005T on front end of
D5965U D5876U chassis
1951 Nine 4 8? A6211U 4A6081U
1951 4AB 4 60x95mm 8? 16 4AB7254U RH side rear of engine on 4AB7592U RH side of engine
Clutch housing on scuttle
1951 4AD 4 73x90mm 13 16 4AD305U Same as 4AB 4AD284U Same as 4AB
1952 4AD 4 73x90mm 13 16 4AD682V on flywheel housing 4AD284U same as 4AB
4AD/1054/V 4AD/925/V stamped on chassis
RH side, near body
Mounting bracket
1952 SM1500 4 73x90mm 13 23 D1961V on flywheel mounting D1943V plate on RH bulkhead
1952 SM1500 4 D/825/U D/708/U
1953 4AB 4 16 4AB/7756/V 4AB/7756/V
1954 4AD-4ADT 4 73x89.4mm 13 17 4ADT/2770/W-4ADT/3182/X- 4AD/3105/X- plate on scuttle
4AD/2585/W 4AD/2823/W
1954 SM1500 4 2.874”x3.543” 13.1 23 D/8614/X RH side of flywheel D/8545/X Right side of bulkhead
D/7695/W housing
1954 SM1500 4 73x89.4mm 13.2 23 DT/7613/W LH side front flywheel D/7586/W Top of front scuttle
housing
1955 Hunter 4 73x89.4mm 13.2 H/239/Y stamped RH side of H/252/Y Plate RH of scuttle
flywheel housing
1956 Hunter 4 73x89.4mm 13.2 H/2675/Z RH side of flywheel Hsg H/2645/Z Plate RH side scuttle
THESE DETAILS ARE TAKEN FROM OLD VIC ROADS RECORDS AND ARE OFFERED AS A GUIDE ONLY.

You might also like