Scribd
Upload
43 views2 pages

Pet Engineering College - Vallioor: Me71-Mechatronics

1. The document is an internal assessment test from the Department of Mechanical Engineering at PET Engineering College in Vallioor for the course ME71-Mechatronics. 2. The test contains 3 parts - Part A with 5 short answer questions worth 10 marks total, and Part B with 3 longer answer questions worth 16, 16, and 8 marks respectively for a total of 50 marks. 3. The questions cover topics in mechatronics including open and closed loop control systems, sensors, transducers, encoders, and examples of automatic control systems.

Uploaded by

legenkiller
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
43 views2 pages

Pet Engineering College - Vallioor: Me71-Mechatronics

1. The document is an internal assessment test from the Department of Mechanical Engineering at PET Engineering College in Vallioor for the course ME71-Mechatronics. 2. The test contains 3 parts - Part A with 5 short answer questions worth 10 marks total, and Part B with 3 longer answer questions worth 16, 16, and 8 marks respectively for a total of 50 marks. 3. The questions cover topics in mechatronics including open and closed loop control systems, sensors, transducers, encoders, and examples of automatic control systems.

Uploaded by

legenkiller
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PET ENGINEERING COLLEGE VALLIOOR

DEPARTMENT OF MECHANICAL ENGINEERING

Internal Assessment Test I

ME71-MECHATRONICS
DATE: 09-08-2012
SEMESTER: VII

TOTAL: 50marks
TIME: 1 hrs

PART - A (5 X 2=10 MARKS)


1.

Compare Open Loop and Closed Loop System


2. Sketch the basic elements of Mechatronics system.
3. What is sequential control system and Give some Examples.
4. Classify sensors.
5. Define SeeBeck Effect.
PART B
A) Explain about open loop and closed loop control system

1.

(08)

OR
B) Explain any two Temperature sensors with neat sketch

(08)

A) i) Explain the static and dynamic characteristics of a Transducer

(08)

2.

ii) Explain Linear Variable Differential Transformer and Hall Effect Sensor
with neat sketch

(08)

OR
B) Sketch and Label the following
i) Linear Potentiometer
ii) Bourdon Pressure Tube
iv)Tactile Sensor

iii) Strain Gauge Load cell

3. A) i) What is an optical encoder?. Explain the types with neat sketch


ii) Explain Eddy current sensor with neat sketch

(16)

(10)
(06)

OR
B) Sketch and Label the Block diagram and schematic diagram for the following system
i) Automatic Shaft Speed Control System
(05)
ii) Automatic Washing Machine System

(06)

iii) Automatic Tank Level Control

(05)

PET ENGINEERING COLLEGE VALLIOOR


DEPARTMENT OF MECHANICAL ENGINEERING

Internal Assessment Test I

ME71-MECHATRONICS
DATE: 06-08-2011

TOTAL: 50marks

SEMESTER: VII

TIME: 1 hrs
PART - A (5 X 2=10 MARKS)

1.

Define system with an example

2. What are the basic elements of closed loop control system?


3. What is a sensor?
4. Define range and span?
5. What are the merits and demerits of closed loop control system?
PART B
1. Explain

sequential control system with an example

(16 marks)

2. Describe the microprocessor based control in engine management system

(16 marks)

3. Explain the basic elements of measurement system with example?

(8 marks)

You might also like