Scribd
Upload
142 views6 pages

Stoplog Staad Report

This document contains the output of a structural analysis performed using STAAD.Pro software. It summarizes the model which includes 45 joints, 32 shell elements, and 21 supports. Load combinations are defined including dead load, thrust load, and hydrostatic load. The results include reaction forces, displacements, and equilibrium checks for each load case.

Uploaded by

vinay1999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views6 pages

Stoplog Staad Report

This document contains the output of a structural analysis performed using STAAD.Pro software. It summarizes the model which includes 45 joints, 32 shell elements, and 21 supports. Load combinations are defined including dead load, thrust load, and hydrostatic load. The results include reaction forces, displacements, and equilibrium checks for each load case.

Uploaded by

vinay1999
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Thursday, December 04, 2014, 03:18 PM

PAGE NO.

****************************************************
*
*
*
STAAD.Pro V8i SELECTseries4
*
*
Version 20.07.09.31
*
*
Proprietary Program of
*
*
Bentley Systems, Inc.
*
*
Date=
DEC 4, 2014
*
*
Time=
15: 9:32
*
*
*
*
USER ID: mecon
*
****************************************************

1. STAAD SPACE
INPUT FILE: stoplog.STD
2. START JOB INFORMATION
3. ENGINEER DATE 04-DEC-14
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT MMS KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 400 0 0; 3 400 0 500; 4 0 0 500; 5 800 0 0; 6 800 0 500
9. 7 1200 0 0; 8 1200 0 500; 9 1600 0 0; 10 1600 0 500; 11 400 0 1000
10. 12 0 0 1000; 13 800 0 1000; 14 1200 0 1000; 15 1600 0 1000
11. 16 400 0 1500; 17 0 0 1500; 18 800 0 1500; 19 1200 0 1500
12. 20 1600 0 1500; 21 400 0 2000; 22 0 0 2000; 23 800 0 2000
13. 24 1200 0 2000; 25 1600 0 2000; 26 400 0 2500; 27 0 0 2500
14. 28 800 0 2500; 29 1200 0 2500; 30 1600 0 2500; 31 400 0 3000
15. 32 0 0 3000; 33 800 0 3000; 34 1200 0 3000; 35 1600 0 3000
16. 36 400 0 3500; 37 0 0 3500; 38 800 0 3500; 39 1200 0 3500
17. 40 1600 0 3500; 41 400 0 4000; 42 0 0 4000; 43 800 0 4000
18. 44 1200 0 4000; 45 1600 0 4000
19. ELEMENT INCIDENCES SHELL
20. 1 1 2 3 4; 2 2 5 6 3; 3 5 7 8 6; 4 7 9 10 8; 5 4 3 11 12; 6 3 6 13 11
21. 7 6 8 14 13; 8 8 10 15 14; 9 12 11 16 17; 10 11 13 18 16
22. 11 13 14 19 18; 12 14 15 20 19; 13 17 16 21 22; 14 16 18 23 21
23. 15 18 19 24 23; 16 19 20 25 24; 17 22 21 26 27; 18 21 23 28 26
24. 19 23 24 29 28; 20 24 25 30 29; 21 27 26 31 32; 22 26 28 33 31
25. 23 28 29 34 33; 24 29 30 35 34; 25 32 31 36 37; 26 31 33 38 36
26. 27 33 34 39 38; 28 34 35 40 39; 29 37 36 41 42; 30 36 38 43 41
27. 31 38 39 44 43; 32 39 40 45 44
28. ELEMENT PROPERTY
29. 1 TO 32 THICKNESS 20
30. DEFINE MATERIAL START
31. ISOTROPIC STEEL
32. E 205
33. POISSON 0.3
34. DENSITY 7.68195E-008
35. ALPHA 1.2E-005
36. DAMP 0.03
37. TYPE STEEL
38. STRENGTH FY 0.2532 FU 0.4078 RY 1.5 RT 1.2

E:\PROJECTS\BARC-OSCOM\stoplog.anl

Page 1 of 6

Thursday, December 04, 2014, 03:18 PM


STAAD SPACE
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.

-- PAGE NO.

END DEFINE MATERIAL


CONSTANTS
MATERIAL STEEL ALL
SUPPORTS
1 4 9 10 12 15 17 20 22 25 27 30 32 35 37 40 TO 45 FIXED
UNIT METER NEWTON
LOAD 1 LOADTYPE NONE TITLE DEAD LOAD
SELFWEIGHT Y -1 LIST ALL
LOAD 2 LOADTYPE NONE TITLE THRUST LOAD
ELEMENT LOAD
1 TO 32 PR GY 1094
LOAD 3 LOADTYPE NONE TITLE HYDROSTATIC LOAD
ELEMENT LOAD
1 TO 32 PR GY -88260
LOAD COMB 4 DEAD LOAD+THRUST LOAD
1 1.0 2 1.0
LOAD COMB 5 DEAD LOAD+HYDROSTATIC LOAD
1 1.0 3 1.0
PERFORM ANALYSIS PRINT STATICS CHECK

P R O B L E M
S T A T I S T I C S
----------------------------------NUMBER OF JOINTS
NUMBER OF PLATES
NUMBER OF SURFACES

45
32
0

NUMBER OF MEMBERS
NUMBER OF SOLIDS
NUMBER OF SUPPORTS

0
0
21

SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER


ORIGINAL/FINAL BAND-WIDTH=
TOTAL PRIMARY LOAD CASES =
SIZE OF STIFFNESS MATRIX =
REQRD/AVAIL. DISK SPACE =

E:\PROJECTS\BARC-OSCOM\stoplog.anl

10/
9/
42 DOF
3, TOTAL DEGREES OF FREEDOM =
7 DOUBLE KILO-WORDS
12.2/ 14998.0 MB

144

Page 2 of 6

Thursday, December 04, 2014, 03:18 PM


STAAD SPACE

-- PAGE NO.

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO.


LOADTYPE NONE TITLE DEAD LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).


(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
X =
Y =
Z =
***TOTAL APPLIED LOAD
SUMMATION FORCE-X
SUMMATION FORCE-Y
SUMMATION FORCE-Z

0.800000104E+00
0.000000000E+00
0.199999984E+01

( NEWT METE ) SUMMARY (LOADING


=
0.00
=
-9832.90
=
0.00

SUMMATION OF MOMENTS AROUND THE ORIGINMX=


19665.79 MY=
0.00 MZ=

1 )

-7866.32

***TOTAL REACTION LOAD( NEWT METE ) SUMMARY (LOADING


SUMMATION FORCE-X =
0.00
SUMMATION FORCE-Y =
9832.90
SUMMATION FORCE-Z =
0.00
SUMMATION OF MOMENTS AROUND THE ORIGINMX=
-19665.79 MY=
0.00 MZ=

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING


MAXIMUMS
AT NODE
X = 0.00000E+00
0
Y = -2.18239E-02
5
Z = 0.00000E+00
0
RX= -2.31725E-04
5
RY= 0.00000E+00
0
RZ= -3.85432E-04
2

1 )

7866.32

1)

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO.


LOADTYPE NONE TITLE THRUST LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).


(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
X =
Y =
Z =

0.799999996E+00
0.000000000E+00
0.199999997E+01

E:\PROJECTS\BARC-OSCOM\stoplog.anl

Page 3 of 6

Thursday, December 04, 2014, 03:18 PM


STAAD SPACE

***TOTAL APPLIED LOAD


SUMMATION FORCE-X
SUMMATION FORCE-Y
SUMMATION FORCE-Z

-- PAGE NO.

( NEWT METE ) SUMMARY (LOADING


=
0.00
=
7001.60
=
0.00

SUMMATION OF MOMENTS AROUND THE ORIGINMX=


-14003.20 MY=
0.00 MZ=

2 )

5601.28

***TOTAL REACTION LOAD( NEWT METE ) SUMMARY (LOADING


SUMMATION FORCE-X =
0.00
SUMMATION FORCE-Y =
-7001.60
SUMMATION FORCE-Z =
0.00
SUMMATION OF MOMENTS AROUND THE ORIGINMX=
14003.20 MY=
0.00 MZ=

2 )

-5601.28

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING


MAXIMUMS
AT NODE
X = 0.00000E+00
0
Y = 1.55399E-02
5
Z = 0.00000E+00
0
RX= 1.65002E-04
5
RY= 0.00000E+00
0
RZ= 2.74450E-04
2

2)

STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO.


LOADTYPE NONE TITLE HYDROSTATIC LOAD

CENTER OF FORCE BASED ON Y FORCES ONLY (METE).


(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
X =
Y =
Z =
***TOTAL APPLIED LOAD
SUMMATION FORCE-X
SUMMATION FORCE-Y
SUMMATION FORCE-Z

0.799999996E+00
0.000000000E+00
0.199999997E+01

( NEWT METE ) SUMMARY (LOADING


=
0.00
=
-564863.93
=
0.00

SUMMATION OF MOMENTS AROUND THE ORIGINMX=


1129727.76 MY=
0.00 MZ=

-451891.10

***TOTAL REACTION LOAD( NEWT METE ) SUMMARY (LOADING


SUMMATION FORCE-X =
0.00
SUMMATION FORCE-Y =
564863.93
SUMMATION FORCE-Z =
0.00

E:\PROJECTS\BARC-OSCOM\stoplog.anl

3 )

3 )

Page 4 of 6

Thursday, December 04, 2014, 03:18 PM


STAAD SPACE

SUMMATION OF MOMENTS AROUND THE ORIGINMX=


-1129727.74 MY=
0.00 MZ=

MAXIMUM DISPLACEMENTS ( CM /RADIANS) (LOADING


MAXIMUMS
AT NODE
X = 0.00000E+00
0
Y = -1.25370E+00
5
Z = 0.00000E+00
0
RX= -1.33118E-02
5
RY= 0.00000E+00
0
RZ= -2.21417E-02
2

-- PAGE NO.

451891.14

3)

************ END OF DATA FROM INTERNAL STORAGE ************

58. FINISH

E:\PROJECTS\BARC-OSCOM\stoplog.anl

Page 5 of 6

Thursday, December 04, 2014, 03:18 PM


STAAD SPACE

-- PAGE NO.

*********** END OF THE STAAD.Pro RUN ***********


**** DATE= DEC

4,2014

TIME= 15: 9:36 ****

************************************************************
*
For questions on STAAD.Pro, please contact
*
*
Bentley Systems or Partner offices
*
*
*
*
Telephone
Web / Email
*
* USA
+1 (714) 974-2500
*
* UK
+44 (0) 808 101 9246
*
* SINGAPORE +65 6225-6158
*
* FRANCE
+33 (0) 1 55238400
*
* GERMANY
+49 0931 40468
*
* INDIA
+91 (033) 4006-2021
*
* JAPAN
+81 (03)5952-6500
http://www.ctc-g.co.jp
*
* CHINA
+86 21 6288 4040
*
* THAILAND +66 (0)2645-1018/19 [email protected]*
*
*
* Worldwide http://selectservices.bentley.com/en-US/
*
*
*
************************************************************

E:\PROJECTS\BARC-OSCOM\stoplog.anl

Page 6 of 6

You might also like