Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    Annexure: Particulars Required For Overhead Crossing

    Uploaded by

    Stephen Bridges
    This document provides details for calculating sags and tensions for overhead power lines under different temperature conditions. It includes the specifications of the conductor being used, which is an ACSR panther conductor. It then lists the calculations for four conditions: sag at maximum temperature with no wind, sag at initial temperature with wind, sag at maximum temperature with initial temperature, and sag at minimum temperature with initial temperature. For each condition, it specifies the temperature, initial and resulting tensions, sag, and other parameters used in the calculations. It concludes by providing the distances and sags calculated for different spans of the overhead line where a railway crossing is located.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Annexure: Particulars Required For Overhead Crossing

    Uploaded by

    Stephen Bridges
    83 views1 page
    This document provides details for calculating sags and tensions for overhead power lines under different temperature conditions. It includes the specifications of the conductor being used, which is an ACSR panther conductor. It then lists the calculations for four conditions: sag at maximum temperature with no wind, sag at initial temperature with wind, sag at maximum temperature with initial temperature, and sag at minimum temperature with initial temperature. For each condition, it specifies the temperature, initial and resulting tensions, sag, and other parameters used in the calculations. It concludes by providing the distances and sags calculated for different spans of the overhead line where a railway crossing is located.

    Original Title

    sag calcl.xlsx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details for calculating sags and tensions for overhead power lines under different temperature conditions. It includes the specifications of the conductor being used, which is an ACSR panther conductor. It then lists the calculations for four conditions: sag at maximum temperature with no wind, sag at initial temperature with wind, sag at maximum temperature with initial temperature, and sag at minimum temperature with initial temperature. For each condition, it specifies the temperature, initial and resulting tensions, sag, and other parameters used in the calculations. It concludes by providing the distances and sags calculated for different spans of the overhead line where a railway crossing is located.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    83 views1 page

    Annexure: Particulars Required For Overhead Crossing

    Uploaded by

    Stephen Bridges
    This document provides details for calculating sags and tensions for overhead power lines under different temperature conditions. It includes the specifications of the conductor being used, which is an ACSR panther conductor. It then lists the calculations for four conditions: sag at maximum temperature with no wind, sag at initial temperature with wind, sag at maximum temperature with initial temperature, and sag at minimum temperature with initial temperature. For each condition, it specifies the temperature, initial and resulting tensions, sag, and other parameters used in the calculations. It concludes by providing the distances and sags calculated for different spans of the overhead line where a railway crossing is located.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    Annexure: Particulars required for overhead Crossing

    22
    23
    24
    25
    26
    27
    28
    29

    30
    31
    32
    33
    34
    35
    36
    37

    38
    39
    40
    41
    42
    43
    44
    46
    47
    48
    49
    50
    51
    52
    53
    54
    55
    56
    57
    58
    59
    a)
    b)
    c)
    57
    58
    59
    60
    61
    62
    63
    64

    Condition 1
    Effective weight of conductor (Wr)
    Max. working Tension(T1)
    Sag(s)

    Condition 2
    Initial working Tension(T1)
    Effective Loading(w1*w1)
    K
    Y
    When wind is still(Wh=0), so w2=wc
    C
    M
    Tension (T2)
    Sag at 75 deg C

    Condition 3
    Temperature diff.(75-32.2)
    Working Tension(T1)
    K
    Y
    C
    Tension(T2)
    Sag at (75-32.2) degC

    Condition 4
    Temperature diff.(-2.5-32.2)
    Working Tension(T1)
    K
    Y
    C
    Tension(T2)
    Sag at -2.5 degC
    height difference between towers
    For our span of 245m
    L1
    L2
    L6 (from DFCC track-0 to null point)
    L5 (from DFCC track-6 to null point)
    L4 (from RAS track to null point)
    L3 (from Existing track to null point)
    Sag at L1(from null point to tower no.32)
    Sag at L2(from null point to tower no.31)
    Sag at L3 (4.13m) - Existing Track
    Sag at L4 (36.45 m)- RAS Track
    Sag at L5 (81.97m)- DFC Track-6 (near to tower no. 31)
    Sag at L6 (59.1m)- DFC Track-0 (near to tower no. 31)
    RAS Track height
    Vertical clearance at RAS track
    Existing Track height
    Vertical clearance at Existing Track
    DFCC Track height -0
    Vertical clearance at DFCC Track-0
    Vertical clearance at DFCC Track-6
    L1
    L2
    Sag at L1
    Sag at L2
    Sag at L3 (99.68m) - Existing Track
    Sag at L4 (59.1m)- RAS Track
    Sag at L5 (67.5m)- DFC Track-6 (near to tower no. 31)
    Sag at L6 (90.337m)- DFC Track-0 (near to tower no. 31)

    Unit

    kg/m2
    kg/m

    ACSR panther
    30/3 mm Al./ steel 7/3.00mm dia
    21
    261.5
    0.974
    9144
    0.0000193
    7870
    245
    75
    -2.5
    7.592
    245
    4.75
    2
    4
    45
    0.630

    kg / m
    kg
    m

    Sag at 0deg C, full wind & FOS= 4


    1.16
    2286
    3.81

    mm
    mm2
    kg/m
    kg
    per deg C
    kg/mm2
    m
    degC
    degC
    m
    m
    m

    kg
    kg/ m

    kg
    m

    degC
    kg

    kg
    m

    Sag at 75deg C, initial temp 0degC,


    No wind & FOS= 4
    2286
    1.346
    502.67
    2978.96
    0.974
    4882983607.57
    -2476.29
    1159
    6.31
    Sag at 75deg C, No wind & FOS= 4,
    initial temp = 32.2degC
    42.8
    2286
    1351.60
    1700.0
    4882983608
    1588
    4.602

    kg
    m

    Sag at -2.5 deg C, No wind & FOS= 4,


    initial temp = 32.2degC
    -34.7
    2286
    1351.60
    -1378.27
    4882983608
    3205
    2.28

    4.05

    m
    m
    m
    m
    m
    m
    m
    m
    m
    m

    95.55
    149.45
    59.13
    81.97
    36.45
    4.13
    2.80
    6.85
    0.0052
    0.407
    2.06
    1.07
    4.50
    23.41
    5.00
    22.51
    9.00
    18.52
    19.51
    68.11
    176.89
    0.70
    4.75
    1.51
    0.53
    0.69
    1.24

    degC
    kg

    m
    m
    m
    m
    m
    m
    m
    m
    m
    m
    m
    m
    m
    m
    m

    Sag at 75deg C,initial temp =32.2degC

    19
    20
    21

    Attributes
    Code of Conductor
    Size
    Overall Dia
    Area
    Unit wt of Conductor
    Ultimate tensile strenghth
    Coeff of Linear Expansion
    Young's modulus
    Crossing Span
    Max. Temp.
    Min. Temp.
    Max Sag at 75 deg c at normal span
    Crossing Span
    Min. sag at -2.5degC at normal span
    FOS
    FOS at 32.2 degC
    Wind Presssure
    Wind Load per metre (Wh)

    Sag at -2.5 deg C,


    initial temp =
    32.2degC

    S. No.
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18

    You might also like