Scribd
Upload
80 views1 page

Ultracore 71c Suite

This document provides information on UltraCore 71C flux-cored gas-shielded welding wire, including its composition, operating procedures, and deposition rates for different wire diameters and parameters. The wire conforms to AWS E71T-1C-H8 and E71T-9C-H8 specifications and is intended for use with a 100% CO2 shielding gas.

Uploaded by

H_DEBIANE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

Ultracore 71c Suite

This document provides information on UltraCore 71C flux-cored gas-shielded welding wire, including its composition, operating procedures, and deposition rates for different wire diameters and parameters. The wire conforms to AWS E71T-1C-H8 and E71T-9C-H8 specifications and is intended for use with a 100% CO2 shielding gas.

Uploaded by

H_DEBIANE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FLUX-CORED GAS-SHIELDED (FCAW-G) WIRE

UltraCore 71C

(AWS E71T-1C-H8, E71T-9C-H8)

DEPOSIT COMPOSITION(1) As Required per AWS A5.20/A5.20M

Requirements(4)
AWS E71T-1C-H8
AWS E71T-9C-H8
Typical Results(3)
As-Welded with 100% CO2

%C

%Mn

%Si

%S

%P

Diffusible Hydrogen
(mL/100g weld deposit)

0.12
max.

1.75
max.

0.90
max.

0.03
max.

0.03
max.

8.0
max.

0.03-0.04

1.31-1.41

0.43-0.49

0.01

0.01

4-7

TYPICAL OPERATING PROCEDURES


Diameter, Polarity
Shielding Gas

0.045 in (1.1 mm), DC+


100% CO2

0.052 in (1.3 mm), DC+


100% CO2

1/16 in (1.6 mm), DC+


100% CO2

CTWD(5) Wire Feed Speed


mm (in) m/min (in/min)

Voltage
(volts)

Approx. Current
(amps)

Melt-Off Rate
kg/hr (lb/hr)

Deposition Rate Efficiency


(%)
kg/hr (lb/hr)

25 (1)

4.4
6.4
7.6
8.9
10.2
11.4
12.7
14.0
15.2

(175)
(250)
(300)
(350)
(400)
(450)
(500)
(550)
(600)

21-26
22-27
23-28
24-29
25-30
26-31
27-32
28-33
29-34

125
155
165
190
205
230
245
265
275

1.8
2.6
3.1
3.6
4.1
4.7
5.2
5.7
6.2

(4.0)
(5.7)
(6.8)
(8.0)
(9.1)
(10.3)
(11.4)
(12.5)
(13.7)

1.6
2.3
2.7
3.2
3.6
4.1
4.5
5.0
5.4

(3.5)
(5.0)
(6.0)
(7.0)
(8.0)
(9.0)
(10.0)
(10.9)
(11.9)

86-88

25 (1)

3.8
5.1
6.4
7.6
8.9
9.5
10.8
12.1
12.7

(150)
(200)
(250)
(300)
(350)
(375)
(425)
(475)
(500)

21-26
22-27
23-28
24-29
25-30
26-31
28-33
29-34
30-36

150
165
190
215
235
255
275
295
315

2.0
2.7
3.4
4.1
4.7
5.1
5.8
6.4
6.8

(4.5)
(6.0)
(7.5)
(9.0)
(10.5)
(11.2)
(12.7)
(14.2)
(15.0)

1.8
2.4
2.9
3.5
4.1
4.4
5.0
5.6
5.9

(3.9)
(5.2)
(6.5)
(7.8)
(9.1)
(9.8)
(11.1)
(12.4)
(13.0)

86-88

25 (1)

3.2
4.4
5.1
5.7
6.4
7.6
8.3
8.9
10.2

(125)
(175)
(200)
(225)
(250)
(300)
(325)
(350)
(400)

21-26
22-27
23-28
24-29
25-30
27-31
26-33
29-34
30-36

185
215
235
265
285
315
335
365
395

2.4
3.3
3.8
4.3
4.8
5.7
6.2
6.7
7.6

(5.3)
(7.4)
(8.4)
(9.5)
(10.5)
(12.6)
(13.7)
(14.7)
(16.8)

2.1
2.9
3.3
3.7
4.2
5.0
5.4
5.8
6.6

(4.6)
(6.4)
(7.3)
(8.2)
(9.2)
(11.0)
(11.9)
(12.8)
(14.6)

86-88

Typical all weld metal. (2)Measured with 0.2% offset. (3)See test results disclaimer on pg. 18. (4)As-Welded with 100% CO2 (5)To estimate ESO, subtract 1/4 in (6.0 mm) from CTWD.
NOTE: FEMA and AWSD1.8 structural steel seismic supplement test data can be found on this product at www.lincolnelectric.com.
(1)

W E L D I N G C O N S U M A B L E S C ATA L O G

115

You might also like