Scribd
Upload
1K views2 pages

Visga 68

This document describes VISGA anti-wear hydraulic oils that have a high viscosity index and shear stability. The oils are recommended for high pressure and high speed hydraulic systems operating in a wide range of temperatures. They offer excellent anti-wear properties as well as resistance to oxidation, corrosion, rust, foaming, and hydrolysis. The oils meet specifications of major hydraulic equipment manufacturers and are available in ISO grades 15 to 150.

Uploaded by

cajasc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Visga 68

This document describes VISGA anti-wear hydraulic oils that have a high viscosity index and shear stability. The oils are recommended for high pressure and high speed hydraulic systems operating in a wide range of temperatures. They offer excellent anti-wear properties as well as resistance to oxidation, corrosion, rust, foaming, and hydrolysis. The oils meet specifications of major hydraulic equipment manufacturers and are available in ISO grades 15 to 150.

Uploaded by

cajasc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VISGA

DESCRIPTION
Anti-wear hydraulic oils with a high viscosity index and high shear stability.

APPLICATIONS
VISGA range have been especially developed in order to satisfy the wide variations in
temperature encountered with modern hydraulic systems.

VISGA range are particularly recommended for all high pressure and high speed, vane,
piston and gear type hydraulic pumps, and for use in all hydraulic equipments operating in
extreme temperature conditions, including :
- Remote control systems
- Hydraulic deck machinery
- Steering gears...

PROPERTIES
Excellent anti-wear properties.
High viscosity index and high shear stability.
Low pour point.
Very high resistance to oxidation.
Excellent anti-corrosion and anti-rust properties.
Excellent water and air release properties.
High resistance to foaming.
Compatibility with all seals.
Excellent resistance to hydrolysis.
Excellent filtrability under severe applications.

SPECIFICATIONS
These oils meet the specifications of the world's leading hydraulic equipment manufacturers
NF E 48603 class HV, DIN 51 524 part 3 class HVLP, ISO 6743/4 class HV.

CHARACTERISTICS
CHARACTERISTICS
ISO Grade
Density at 15 C
Kinematic viscosity at 40 C
Kinematic viscosity at 100 C
Viscosity index
Pour Point

METHODS

UNITS

ISO 3675
ISO 3104
ISO 3104
ISO 2909
ISO 3016

kg/m
2
mm /s
2
mm /s

VISGA
15
855
15.8
3.9
>150
- 42

22
864
23
5
>150
- 42

32
870
34
6.6
>150
- 33

46
876
48
8.4
>150
- 30

68
882
71
11.3
>150
- 27

100
886
105
15.2
>150
- 24

150
890
157
20.3
>150
- 21

Characteristics of this chart are indicative typical values

PRODUCT INFORMATION

HANDLING, HEALTH AND SAFETY


Lubricants consisting of highly refined mineral oils with specific additives.
In normal conditions of use, these lubricants present no particular toxic hazard.
All lubricants, of any kind, should always be handled with great care, particularly
avoiding any contact with the skin.
Prevent any risk of splashing, and keep away from combustible materials.
Store under cover and away from any risk of contamination.
A safety data sheet complying with current legislation is available on
www. quickfds.com or www.lubmarine.com.

The values shown above are typical values at the date of publication. TOTAL Lubmarine reserves the right to change these typical values
without prior notice.
TOTAL LUBRIFIANTS
562 avenue du Parc de lIle 92029 Nanterre Cedex
Tel.: 33.1.41.35.59.23 Fax: 33.1.41.35.20.92
www.lubmarine.com - [email protected]

LUBMARINE 51/6GB - 1112

You might also like