Scribd
Upload
69 views1 page

HT12D HT12D Is A Decoder Integrated Circuit That Belongs To 2

HT12D is a decoder integrated circuit that converts serial input into parallel outputs. It decodes serial addresses and data received by devices like RF receivers. The HT12D compares the input to stored addresses and decodes valid transmissions, signaling them through the VT pin. It can decode 12 bits total, with 8 address bits and 4 data bits. The data remains on the output pins until new data is received.

Uploaded by

him1234567890
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
69 views1 page

HT12D HT12D Is A Decoder Integrated Circuit That Belongs To 2

HT12D is a decoder integrated circuit that converts serial input into parallel outputs. It decodes serial addresses and data received by devices like RF receivers. The HT12D compares the input to stored addresses and decodes valid transmissions, signaling them through the VT pin. It can decode 12 bits total, with 8 address bits and 4 data bits. The data remains on the output pins until new data is received.

Uploaded by

him1234567890
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

HT12D

HT12D is a decoder integrated circuit that belongs to 212 series of decoders. This series of
decoders are mainly used for remote control system applications, like burglar alarm, car door
controller, security system etc. It is mainly provided to interface RF and infrared
circuits. They are paired with 212 series of encoders. The chosen pair of encoder/decoder
should have same number of addresses and data format.
In simple terms, HT12D converts the serial input into parallel outputs. It decodes the serial
addresses and data received by, say, an RF receiver, into parallel data and sends them to
output data pins. The serial input data is compared with the local addresses three times
continuously. The input data code is decoded when no error or unmatched codes are found. A
valid transmission in indicated by a high signal at VT pin.
HT12D is capable of decoding 12 bits, of which 8 are address bits and 4 are data bits. The
data on 4 bit latch type output pins remain unchanged until new is received.
Pin Diagram:

Pin Description:
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18

Function

8 bit Address pins for input

Ground (0V)
4 bit Data/Address pins for output
Serial data input
Oscillator output
Oscillator input
Valid transmission; active high
Supply voltage; 5V (2.4V-12V)

Name
A0
A1
A2
A3
A4
A5
A6
A7
Ground
D0
D1
D2
D3
Input
Osc2
Osc1
VT
Vcc

You might also like