Scribd
Upload
53 views2 pages

AUTONOMIA

The document provides details for an autonomous robot competition where teams must build a robot that can navigate through a spiral path on an arena floor. Teams are limited to 4 members who must decide a representative. Robots must fit in a 250mm x 250mm x 250mm box and weigh less than 5kg. They will run on 24V power and navigate white lines that are 3cm wide in a spiral path. Abstracts describing each team's robot design are due by October 15th and should be emailed to the provided addresses. The event coordinators can be contacted for any additional information.

Uploaded by

Sachin Behl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

AUTONOMIA

The document provides details for an autonomous robot competition where teams must build a robot that can navigate through a spiral path on an arena floor. Teams are limited to 4 members who must decide a representative. Robots must fit in a 250mm x 250mm x 250mm box and weigh less than 5kg. They will run on 24V power and navigate white lines that are 3cm wide in a spiral path. Abstracts describing each team's robot design are due by October 15th and should be emailed to the provided addresses. The event coordinators can be contacted for any additional information.

Uploaded by

Sachin Behl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AUTONOMIA

Task:
Build an autonomous robot which can navigate through a spiral path.
Event Description:
1. Two Robots have to navigate through a spiral path of white lines (on a
black background) from their respective starting points and reach to end
points.
2. The robot which completes the task in minimum time duration
advances to next round.

Team specifications:
1. A team of maximum 4 members is allowed.
2. Team members should decide a team representative.

Robot and Arena specification:


1. Robot should fit in a box of 250mm x 250mm x 250mm before the
commencement of the match.
2. The weight of the robot should not exceed 5 kg.
3. Power supply should not exceed 24V between any two points on the
robot.
4. The white line will be of 3cm in width as shown in the diagram
below.
5. The dimensions of the arena may vary within the error limits of 5 %.

Abstract:
1. Robot should be explained in details with the help of diagrams.
2. All the abstracts should be mailed on or before 15th Oct 2014,
positively.
3. The subject of the abstract should be: AUTONOMIA_ (team name),
also mention the contact details.
4. Abstracts to be mailed to following email id : [email protected] ,
[email protected]
Arena will look like this:

Event coordinators:
Rahul: 9729898879
Varun : 9034762425

Shekhar: 8053840248

You might also like