Granite Surface Plates: in The Metrology Business Since 1966
Granite Surface Plates: in The Metrology Business Since 1966
Granite Surface Plates: in The Metrology Business Since 1966
Cubes
Master Squares
Straight Edge
Special Products
SPECIFICATIONS
FLATNESS TOLERANCE IN m FOR ACCURACY GRADE
SIZE OF
PLATE
(in mm)
WEIGHT
in Kgs.
(Approx.)
GRADE 0
GRADE 1
GRADE 2
GRADE 3
250 x
300 x
250
3.5
15
30
10
300
3.5
15
30
22
400 x
400 x
250
4.0
16
32
20
400
4.5
17
34
40
500 x
630 x
300
4.5
17
34
35
400
5.0
10
20
39
65
630 x
800 x
630
5.0
10
21
42
100
500
5.0
10
21
42
120
1000 x
1000 x
630
6.0
12
24
49
320
1000
7.0
14
28
56
500
1200 x
1600 x
800
7.0
14
28
56
475
1000
8.0
16
33
66
1100
2000 x
1000
9.5
19
38
75
1650
ACCURACY
Rigorous quality control inspection is
carried out at all stages. Final inspection is
carried out at a High Precision
Computerised Electronic Level.
ACCURACY UNDER LOAD
Granite Surface Plates are capable of
supporting a total normal load of 25 kgs.
per 0.1 sq.mtr.
: Fine
CERTIFICATE
A certificate of accuracy is supplied with
each plate as per standards specified.
Specific
Gravity
: 3.08 g/cm
Hardness
: Scleroscope over 90
TECHNICAL DATA
Granite Surface Plates are manufactured
in five grades. The typical application of
these five grades of plates is as under:
Modules of
Elasticity
Moisture of
absorption
: Nil
FLATNESS TOLERANCE
The flatness deviation of a local area of
250 mm x 250 mm of the working surface
shall not exceed :
ADVANTAGES
1. Granite has one of the lowest coefficients of expansion amongst known
materials.
2. Granite does not rust.
3. It may chip but will not develop a burr.
4. It is easy to keep clean.
GRANITE SURFACE PLATE STANDS
These are fabricated of heavy angle iron
and reinforced to ensure rigidity. The
stands are designed to withstand
the weight of the granite surface plates
and are supplied with 3 leveling screws for
leveling the granite surface plates.
OPTIONAL ACCESSORIES
Plate will be supplied with a suitable
Rexine Cover to protect both the working
surface and side faces of the plate at extra
cost.
TO MEET SPECIAL REQUIREMENTS
WE OFFER :
1. Bigger size Granite Surface Plates with
extra thickness.
2. Granite Surface Plates with inserts with
drilled and tapped holes.
3. Granite Straight Edges.
4. Granite Master Squares.
5. Granite Cubes.
6. Master Cylinder made of hardened and
ground steel.
(Metrology Division)
Plot No. 104/2, Sipcot Industrial Complex, Hosur - 635 126. Tel.: 04344-276046 / 405100
Fax : 04344-276450 / 405110 E-mail : gmtmetrology@gmt.co.in, gmtmetrology@airtelmail.in.
Web : www.gmt.co.in
www.gmtmetrology.com
Due to constant development work we reserve the right to depart from the catalogue specifications.
GSP-08-2010-3000 Copies