TLE 2012 September (Major)
TLE 2012 September (Major)
TLE 2012 September (Major)
d. profit
2. Water boils 212 degrees. When water is rolling boil it means the bubbles are ___________.
a. rolling non-stop
c. forming slowly and can be stopped when stirred
b. forming rapidly and cannot be stopped when stirred
d. spiling out of container
3. It refers to the lighter organic material that rises to the surface of the water.
a. Froth
b. Aerobic
c. Scum
d. Anaerobic
d. Power tool
c. Stricking tool
5. When materials are to be laid out, the best tools to be used are __________.
a. Measuring tools
b. Tooth cutting tools
c. Lining tools
d. Boring tools
6. Which of the following tools is the first one to use in cleaning nails?
a. Buffer
b. Cuticle nippers
c. Cuticle knife
d. Cuticle scissor
c. Open circuit
d. Parallel circuit
d. Doctor
9. Mortise and tenon joints are usually used in making furniture, door window, and tools. If mortise means holes, tenon means
a. cut
b. notch
c. overlap
d. projection
10. This wood machine is used for broad surface planning and matching board or planks.
a. Jig saw
b. Jointer
c. Single surface
d. Wood lathe
11. It is the care on personal appearance which includes the condition of the body and how one looks and smells.
a. Good health
b. Grooming
c. Personal development
d. Proper hygiene
12. Manicure and pedicure should be done _______________.
a. Everyday
b. Monthly
c. Weekly
d. Yearly
13. This is a wooden manicure stick intended for a variety of uses, such cleaning underneath the nails and removing polish from
around the cuticle nails.
a. buffer
b. Cuticle nipper
c. Cuticle scissor
d. Orangewood sticks
14. Is used to soften dead nail cuticle.
a. Cuticle remover
b. Nail bleaches
15. Which is true about dark colored vegetables?
a. Affordable and fresher
b. Cheaper and juicer
c. Massage cream
c. Fresher and sweeter
d. Nutritious and cheaper
d. Nail whiteners
18. A part of an electrical circuit, consisting of batteries, generator, or a main electrical power which supplies electricity.
a. Control
b. Load
c. Source
d. Voltage
19. Which of the following electrical qualities is a derivative one?
a. Power
b. Source
c. Voltage
d. Control
d. Vitamin D
d. Stirring
c. Styling
23. The basic nutrients that are essential in maintaining the body functions and good health are carbohydrates, fats, proteins, vitamin,
minerals and water. Which of these is an essential part of body tissues and comprises 2/3 of the body weight?
a. Carbohydrates
b. Proteins
c. Vitamins
d. Water
24. Which of the following consumes electricity most?
a. Dry cell
b. Heat
c. Magnet
25. The number of complete cycles performed in one second is expressed in this unit known as:
a. Frequency
b. Hertz
c. Power
d. Motor
d. Resistance
26. It is needed for a variety of plumbing tasks, from changing faucet washers to disassembling plumbing- related appliances, and they
come in an assortment of sizes and types.
a. Adjustable wrench
b. Locking pliers
c. Pipe wrench
d. Screwdriver
27. It is receptacle or vault to collect organic waste discharge from the house sewer. Its main function is to liquefy and precipitate solid
waste purifying odorous materials.
a. Bibet
b. House drain
c. Canals
d. Septic tank
28. The most popular and widely used materials for the construction of a septic tank is _________.
a. Plastered concrete hallow blocks
c. Prefabricated asbestos
b. Reinforced concrete
d.Thin metal and plastic
29. Which is a hairstyle for formal occasions in which strands of hair and shaped into spirals to stimulate a flower?
a. Brush up
b. Curly
c. Petal and rolls
d. Plain
30. It is an electrical device worn by the patron on his/her head to provide heat for proper distribution of oil during scalp treatment
a. cotton swab
b. hair brush
c. heating cap
d. plastic cap
31. Onions when peeled or cut irritate the eyes and give biting sensation of the tongue, this is due to the presence of
a. mustard oil
b. sodium nitrate
c. sulfoxide
d. sulfur compounds
32. A space occupied by a person in a meal with all of the appropriate table appointments is called
a. cover
b. diners plate
c. menu
d. placement
d. quarters
c. cubes
d. resistance
d. control
d. power tool
d. boring tools
38. The view that is generally drawn directly above the front view in an orthographic drawing is:
a. bottom view
b. side view
c. rear view
d. top view
d. four view
c. six views
40. When solidity of an object is shown by gradual darkening of its particular potion/s then the process involved is _________.
a. Darkening
b. Lighting
c. Shading
d. Shadowing
41. If a drawing has an equal measure, then it refers to __________.
a. Isometric drawing
b. Mechanical drawing
c. Perspective drawing
c. facial makeup
d. expensive jewelry
d. Oblique drawing
43.
44. It used to remove old nail polish for the nail plate. It is rapped around the orangewood stick to clean under the edge and remove
excess polish around the nail.
a. cotton
b. adhesive tape
c. antiseptic
d. mending tissue
45. Which of the following tools is the first one tool in cleaning nails?
a. buffer
b. cuticle nippers
c. cuticle knife
d. cuticle scissors
c. hairstyling
d. skin care
47. Storekeeping is a busy job. Although tiresome, it is very enjoyable because the owner acts as a host, a store owner, housekeeper,
security guard and seller and he is also considered a _______.
a. store owner
b. retail person
c. manager
d. financer
48. If you have a small business, you want people to patronize the store. The best way of attracting more buyers depends on
a. store layout
c. high-pricing of local mercahndise
b. baeutifuil saleslady
d. consumers like
49. It states the importance of the project, its objectives and significance __________.
a. proponent
b. location
c. rationale
d. title
50. An individual who can identify the various products or services which people need and delivers at the right time and place at the
prices is ___________.
a. Capitalist
b. Entrepreneur
c. Contractor
d. Industrialist
51. The practice of adding baking soda when cooking vegetables for the purpose of retaining the green color and the crispiness should
be avoided primarily because _________.
a. the flavor of vegetable is modified
c. they become less perishable
b. they become hard to digest
d. Vitamin C is destroyed in the presence of alkali
52. It is the end product of the accounting process. It is the means by which quantitative information about monetary activities of a
business enterprise can be provided to parties concerned like management, government, among others.
a. Financial statement
b. Income statement
c. Balance sheet
d. Book of final entry
53. These are obligations which are not expected to require the use of current assets or the creation of current liabilities within the year
or operating cycle.
a. Accured liabilities
b. Current liabilities
c. Long-term liabilities
d. Short term liabilities
54. They are on the right and an increase in a credit account decrease a debit account.
a. Credit account
b. Debit account
c. Nominal account
d. Real Account
55. It is used in pairs, one to grip the pipe and other to turn the fitting, which have adjustable, toothed jaws designed for gripping and
turning threaded pipes and pipe fitting.
a. Pipe wrench
b. Adjustable wrench
c. Rib- joint pliers
d. Locking pliers
3
b. Greek
c. Rome
d. Athens
57. Decomposition of organic, matter from human waste is bacteriological process caused by the following except:
a. Anaerobic bacteria called anaerobes
c. Anaerobic decomposition
b. Aerobic bacteria called aerobes
d. Facultative bacteria
58. It comes in a metal or plastic case, with a cotton line coming out of one end and in used is drawing a staright line.
a. brushes
b. jointers
c. steel square
d. chalk line
59. A butt is a wood joint usually fastened by nails, wood screws or __________.
a. cement
b. dowels
c. epoxy
d. none of these
60. It helps to return the skin to its proper pH after washing it with soap and water.
a. Face cleansers
b. Face creams
c. Face lotions
d. Face toners
61. What are the three nutrients that are found in the bread, cereal, rice and pasta group?
a. Carbohydrates, iron and vitamins B
c. Fiber, protein and water
b. Iron, carbohydrates and zinc
d. Protien, zinc and minerals
62. Which of the following adds more color to the table?
a. Centerpiece
b. Place mat
c. Table cloth
d. Table napkin
63. The force which opposes and reduces the flow of electrical current is recognized as _______.
a. Electromagnetic force b. Power
c. Frequency
d. Resistance
64. It refers to the lighter organic material that rises to the surface of the water.
a. Anaerobic
b. aerobics
c. Froth
d. scum
65. What materials are to be laid out, the best tools to be used are __________.
a. Measuring tools
b. Toot cutting tools
c. lining tools
d. Boring tools
66. To completely describe a cone, sphere & rectangular pyramid, the number of views needed is:
a. One
b. two
c. Three
d. six
67. It is considered as the heaviest and darkest line that surrounds a drawing and is usually rectangular in shape.
a. Border line
b. Visible line
c. Dimension line
d. Cutting plane line
68. Where should you place the name of the top view for labeling?
a. Above the view
b. Beside the view
69. It is used to prevent friction burns-during a massage and to soften and moisturize the skin
a. Cuticle remover
b. Massage cream
c. Nail bleaches
70. The aspects of business management that analyzes and determines the supply and demand for the product or service in that past
and its competitive position at present is:
a. Budgeting aspect
b. Finery aspect
c. marketing aspect
d. Production aspect
71. Before starting a business, one should have a clear idea, sometimes called a _________.
a. Descript of the project b. Details of the project
c. Market feasibility
d. Rationale
72. If a drawing is general made without the aid of drawing instruments and staright edges, then it is classified as __________.
a. Freehand drawing
b. Isometric drawing
c. Orthographic drawing
d. axonometric drawing
73. One of the following is used for the fine cutting and for making dedicate wood joint.
a. Back saw
b. Keyhole saw
c. Compass saw
d. turning saw
74. A nail is an are essential material in putting in place piece of wood. To drive or pull a nail the right tool for job is __________.
a. Ball peen hammer
b. Cross peen hammer
c. Claw hammer
d. Mallet
75. It comes in a metal or plastic case, with a cotton line coming out of one end and is used in drawing a straight line.
a. Brushes
b. Jointers
c. Steel square
d. Chalk line
76. The financial record that tells you how much your business worth is that _________.
a. Cash flow report
b. Income statement
c. Cash report
4
d. Balance statement
d. Notes receivables
78. Financial statements may be used for different purposes except by:
a. Vendors who extend credit to a business require financial statements to assess the Creditworthiness of the business
b. Giovernment entities do not need financial statement to ascertain the propriety and Accuracy of taxes and other duties
declared and paid by a company.
c. Financial institutions use them to decide whether to grant a company fresh working capital or extend debt securities to
finance expansion and other significant expenditures.
d. Owners and managers require financial statements to make important business decisions that affect its continued
operation.
79. This is a tool removing solder when desoldering a joint to correct a mistake or replace a component.
a. Copper braid
b. Desoldering pump
c. Reel of solder
d. Solder sucker
80. This tool can also be used to clean strip board where the copper tracks have become dull and tarnished.
a. Heat sucker
b. PCB rubber
c. Track cutter
d. Wire strippers
81. A device used to change sound waves to audio signals is called ___________.
a. Diode
b. Loudspeaker
c. Microphone
d. Transistor
82. If the narrow of a transistor symbol is pointing inward it tells us that the transistor is a/an ___________.
a. Bipolar
b. PNP
c. NPN
d. Unijunction
83. It is the branch of science and technology that deals with the flow of electrons through nonmetallic conductors, mainly
semiconductors such as silicon.
a. Eclectically
b. Electrical
c. Electricity
d. Electronics
84. What is the voltage required by an authomatic pressure cooker having resistance of 20 ohms when the current flowing is 8
amperes.
a. 120 volts
b. 160 volts
c. 240 volts
d. 480 volts
85. What amount of current does a 40-watt fluorescent lamp draw from a 220 volts power source?
a. 5.5 amperes
b. 25.5 amperes
c. 50.5 amperes
d. 55.5 amperes
86. What do you call the semi-liquid substance that accumulates at the bottom of the septic tank?
a. Froth
b. Sludge
c. Scum
d. Mud
d. Urinals
c. Lavatory
88. It refers to the pipe connection from the public water main or any source of water supply to the building served.
a. Branches
b. House service
c. Riser
d. Water main
89. It refers to public water connections which are laid underground along the streets where the house service is connected.
a. Branches
b. House service
c. Riser
d. Water main
90. Why is the National Standard Plumbing Code emphasized?
a. Place the washer into the tail pipe
b. Screw the lock nut into the tail pipe.
c. Tighten the lock nut using a shetack wrench. One hand holding the wrench the other preventing the water faucet from rotating.
d. Clean all the tools used and leave the area clean.
91. It is the prime necessity in all tyope of household.
a. Water
b. car
c. clothes
d. jewelry
92. What is the size of the sepotic tank for a family of 6 persons?
a. 1.3 cubic meters with a minimum size of 90 cm. wide by 150 cm. and 110 cm. depth
b. 1.3 cubic meters with a minimum size of 90 cm. wide by 150 cm. and 120 cm. depth
c. 1.3 cubic meters with a minimum size of 90 cm. wide by 150 cm. and 130 cm. depth
d. 1.3 cubic meters with a minimum size of 90 cm. wide by 150 cm. and 140 cm. depth
93. The handle of the tool is generally made of plastic or wood and I used for spreading mortar.
a. Masons hammer
b. Masons line
c. Blocking chisel
d. Trowel
94. A kind of tool with parts shaped like teeth used to cut or shape wood is a ______________.
a. Boring tool
b. Lining tool
c. Marking tool
c. Meter stick
d. Triangles
c. Inclined line
d. Vertical line
97. A cosmetologist must observe personal cleanliness. Which of the following does not contribute to personal cleanliness?
a. Keep the body clean by having a daily bath shower.
b. Keep teeth and gums in good condition. Brush teeth at least twice a day with a good dentifrice
c. Keep hand and fingernails in good condition
d. Use shoes with hose or peds/hills, change shoes daily.
98. Which of the following is the last procedure in manicuring and pedicuring?
a. Apply cuticle softener or soak fingertips in soapy water to soften cuticle.
b. Push back the cuticle trim hangnails with s pair of scissors.
c. Dry nails and wipe them with a remover. Apply colorless polish evenly then you selected colored polish. Let the polish dry
between coats then apply another coat.
d. Apply a colorless sealing coat over the nail and under the tips.
99. If a lot unknown and uncontrollable factors affect the success or failure of a firm then an entrepreneur should be competent in:
a. Making decisions
c. shift to another business
b. Seeking opportunity abroad
d. planning alone
100. We all desire success in business ventures but it is most important for an entrepreneur to be:
a. good communicator
b. a good follower of trends
c. creative
d. highly educated
d. Series circuit
104. It is closed conducting path by which current can transfer electric energy from a source to load.
a. Electric circuit
b. Electric current
c. Load
d. Resistance
105. Decomposition of organic matter from human waste is a bacteriological process cause except:
a. Anaerobic bacteria called anaerobes
c. Aerobic bacterial called aerobes
b. Anaerobic decomposition
d. Facultative bacteria
106. Egg should be beaten with the use of copper bowl because a Copper bowls ___________.
a. is a special metal utensil really intended for such purpose c. keeps eggs fresh and firm
b. makes eggs fluffy and moist
d. has a special property which stabilizes the eggs
107. An important building and regulating substance in the body which act as solvent is _______________.
a. Blood
b. water
c. Tissue
d. nutrient
108. The appropriate mixing method applied for biscuit- making is the _____ method.
a. Conventional
b. One-bowl
c. muffin
d. Pastry
109. The following are to be included on a low cost meal rich in protein:
a. Beef, chesse, carrot
c. Fish, monggo, tokwa, tulya
b. Chicken, drumstick, milk, macaroni
d. Pork shop, eggs, potato
110. When customer pays cash upon delivery of the goods to their homes, this is known as:
a. Cash on hand
b. Cash in bank
c. cash on delivery
111. It includes revenues that are collected in advance but have not been earned.
a. Accounts payable
b. Accured liabilities
c. Notes payable
d. Unearned income
c. Graph
d. Worksheet
113. John Smith, a world class management consultant, said that the first function of a business enterprise is as economic performer.
Economic performance is measured in terms of __________.
a. Affiliation
b. Popularity
c. Profit
d. Social approval
114. When a regular power supply gives full unregulated voltage output, there is _______.
a. Defective rectifier diodes
c. shorted capacity in particular storage
b. Leaky filter capacitors
d. shorted junction w/in irregular circuit
115. It refers to the electrical device that is used to convent electrical signal to sound:
a. frequency
b. antenna
c. transformer
d. speaker
d. Wage
118. Profit is the concrete indicator of how well an entrepreneur has managed his:
a. Affairs
b. Credits
c. Business
d. Sales
119. It provides an overview of a business or persons financial condition in both short and long term.
a. Balance Sheet
b. Cash out flows
c. Finacial Statement
d. Statement of expenses
120. It explains the changes in a companys retained earnings over the reporting period
a. Balance Sheet
b. Income Statement
c. Statement of cash out flows
earnings
121. Which of the following electrical qualities is a derivative one?
a. power
b. voltage
d. Statement of retained
c. source
d. control
d. magnets
123. Brick, stone, mortar and concrete are some for the materials used in this building construction work.
a. Carpentry
b. masonry
c. finishing
d. plumbing
c. Parallel line
d. Horizontal line
c. Invisible lines
d. visible lines
126. It is concerned with the intelligent care given by an individual with respect to health through; cleanliness, posture, exercise,
relaxation, adequate sleep, balance diet and wholesome thoughts.
a. Good health
b. Personality development
c. Grooming
d. Proper hygiene
127. This is a liquid product applied directly to the nail to protect against stains from the pigments in colored polishes.
a. Base coat
b. Colored enamel
c. Nail polish solvent
d. Top coat
128. A document discussing an entrepreneurs intentions, ideals, perceptions and details of a planned project is known as ________.
a. research paper
b. letter of credit
c. thesis
d. project proposal
129. If an entrepreneur acts to do things that meet or even exceed existing standards of excellence then he is considered to be a/an:
a. Follower
b. Hard worker
c. Pessimist
d. Inventor
130. The key ingredient of entrepreneurship is/are:
a. Discoveries made
b. Innovation
c. Organization study
c. Patience
7
d. Services offered
d. relying on others for information
d. Electricity
134. It is electrical component that is used to oppose the flow of current in a circuit.
a. Capacitor
b. Inductor
c. Diode
d. Resistor
135. It is a protective device that blows open when there is excessive current flow in the circuit.
a. fuse
b. Battery
c. Switch
d. Transformer
136. An ordinary radio can be turned to different stations. The electronic component responsible for this junction is the:
a. Detector diode
b. IF transistor
c. Oscillator
d. Turning capacitor
137. This is an iron tool whose power rating should be 15 to 25 W and it should be fitted with a small bit of 2 to 3 mm diameter. For
intermediate soldering of electronic components. What do you call this too used in electronics.
a. Copper braid
b. Reel of solder
c. soldering iron
d. Solder sucker
138. This tolol is usually just a 3 mm drill bit with a proper handle fitted.
a. Heat sucker
b. Track cutter
c. PCB rubber
d. Wire strippers
139. This is an electrode found nearest the white band on a rectifier. What is it?
a. Anode
b. Gate
c. Cathodo
d. Main terminal
140. They are on the right and an increase in a credit account decreases a credit account.
a. Debit account
b. Credit account
c. Nominal account
d. Real account
141. These are event/ exchanges w/c affect the assets, liabilities owners equity of an organization.
a. Book of final entry
b. financial statement
c. Business transaction
d. Income statement
d. Solar
d. Solar
144. A law which states that current is directly proportional to voltage and inversely proportional to resistance in known as:
a. Chomskys law
b. Kirchoffs law
c. Law of resistivity
d Ohms law
145. In Ohms Law, to solve for the unknown voltage in the circuit, the basic formula to be used is:
a. E = I x R
b. E = I / R
c. I = E / R
d. E = R / I
146. When the diameter of cylindrical objects is to be measured, the tool to be used is a:
a. Caliper
b. Push-pull ruler
c. Meter stick
d. Ruler
147. Sawing irregular shapes on thin pieces of wood is done with the use of a:
a. Back saw
b. Key hole saw
c. Coping saw
d. Rip saw
148. There are considereable numbers of wood joints. The simplest and easiest to make is the:
a. Butt joints
b. Lap joints
c. Dao Joint
d. Miter joints
SUBMIT THIS TEST BOOKLET TOGETHER WITH THE ANSWER SHEET TO YOUR
WATCHERS.
END OF EXAMINATION