Scribd
Upload
126 views1 page

R31 Composite Video

1) The document shows a circuit diagram for a video sync separator using an LM1881 chip. 2) Key components include the LM1881 chip, capacitors C2-C5, and resistors R30-R33. 3) The capacitor C2 is noted as important for decoupling and should be placed close to the power pins of the LM1881 chip.

Uploaded by

skatenat3874
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views1 page

R31 Composite Video

1) The document shows a circuit diagram for a video sync separator using an LM1881 chip. 2) Key components include the LM1881 chip, capacitors C2-C5, and resistors R30-R33. 3) The capacitor C2 is noted as important for decoupling and should be placed close to the power pins of the LM1881 chip.

Uploaded by

skatenat3874
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5 4 3 2 1

D D

R31 C5
Composite Video
C4 U2
C 887 330pF 0.1uF R33 C
2 CMPVID CMPSYNC 1 H-Sync
VSYNC 3
6 10
RSET
BRST/BK 5
8 7 R32
VCC VCC OD/EVN
V-Sync
C3 R30 LM1881/SO 10
0.1uF
340K

VCC C2 is a decoupling
capacitor and is to be
placed as close as
C2
0.1uF possible to the Vcc and
B GND of the LM1881 sync B
seperator.

A Note: Power pins for the LM1881 are not shown and Xbox VGA Converter - By Ken Gasper A
MUST be connected to system Vcc and GND.
Vcc is pin 8. Title
LM1881 Sync Seperator
GND is pin 4.
Size Document Number Rev
A LM1881 1

Date: Tuesday, March 19, 2002 Sheet 3 of 3


5 4 3 2 1

You might also like