ADVANCED LIGHTING GUIDELINES 2001 EDITION 4.

LIGHTING DESIGN CONSIDERATIONS

4-1
4 LIGHTING DESIGN CONSIDERATIONS
This chapter, Lighting Design Considerations, and Chapter 5, Applications, discuss the methods and tools
needed to produce integrated lighting applications that use advanced sources, luminaires and controls.
This chapter reviews the lighting design process, including issues of lighting quality as well as lighting
levels (quantity), and presents a series of nineteen guidelines for designing advanced lighting systems.
This chapter also reviews advanced tools and computer programs to assist designers. Chapter 5 provides
examples of advanced lighting applications for private offices, open offices, executive offices, classrooms,
several types of retail spaces, and an outdoor application. These examples demonstrate how advanced
technologies can be integrated (with daylighting in some cases) to produce very efficient and quality
applications.
4.1 The Lighting Design (and Redesign) Process
Design is the science and art of making things useful to humankind, and lighting design is the
application of lightingincluding daylight when it is specifically used as source of lightingto human
spaces. Like architecture, engineering and other design professions, lighting design relies on a
combination of specific scientific principles, established standards and conventions, and a number of
aesthetic, cultural and human factors applied in an artful manner.
In recent years, the field of lighting has been struggling with two prominent forces, energy efficiency and
lighting quality. Just as the profession of lighting design began to emerge, in which the quality of lighting
is held in high esteem, energy efficiency also became a concern in the design of buildings. Lighting
designers initially faced the choice between attractive, well-lighted spaces and spaces that used a
minimum of energy. The last quarter century has seen at least some resolution of this dilemma: dramatic
improvements in lighting equipment technology, and maturation of the lighting design profession, each
permitting better lighting designs that use less energy than previous practices.
The pursuit of more energy-efficient lighting dominated the lighting field from 19751990, creating
awkward dilemmas for lighting designers. Fueled by utility rebates and commodity pricing, new lighting
systems were designed to use minimum power. Existing lighting systems were retrofitted to save
energy. Lighting installations of inferior quality were the rule, rather than the exception.
Many see the1990s as a period in which the quality of lighting made a significant comeback. This was
most evident as the new century approached in a new process for lighting design put forth by the
Illuminating Engineering Society of North America (IESNA), the major technical association for lighting in
North America. IESNA's recommended procedures for lighting design are described in section 3.3.4.
The Advanced Lighting Guidelines mission is to describe lighting technology and techniques in order to
encourage advanced designs that provide quality lighting with minimum environmental impact. While the
IESNA procedure should generally lead to good quality lighting, it doesnt give energy efficiency and
environmental impact a priority. The advanced strategies described in this chapter enhance the IESNA
procedure so that it may be used to produce designs that minimize energy use and improve the
sustainability of projects.
4.2 Lighting Quantity
4.2.1 Setting Criterion Illumination Levels
The IESNA design procedure described in section 3.3.4 is the most widely used and accepted method for
determining lighting levels for applications. The method consists of the following:
Choose an acceptable illuminance according to categories A through G, with A being the lowest and
G being the highest. For instance, the illuminance associated with Category D is 30 footcandles.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-2
Adjust the actual design level according to tasks and human factors. The designer is strongly
encouraged to make informed adjustments to the criterion light level. For instance, in Category D, one
might choose 20 footcandles for schoolchildren and 50 footcandles for seniors. To make the correct
adjustment, the designer should be aware of the occupants age, the specific tasks to be performed in
the space, and the extent to which daylight affects the space. The presence of other tasks, like a
computer or adjacent workstation, also needs to be taken into account.
The determination of lighting level is critical. Choose levels too low and the success of the project may be
at stake; choose too high, and too much money is spent and energy is used needlessly.
IESNA task illumination recommendations are for the design of lighting under ordinary circumstances,
including the assumption that the viewer is day adapted. The human eye is highly adaptive, so the
precise illumination level is not critical. Increasing the illumination level by 100%, either by design or by
the addition of daylight, will generally make a small improvement in visual performance. Decreasing the
illumination levels will generally cause a reduction in visual performance, but dropping the light level in
half will usually not make a big difference as long as the light quality remains good. Small differences
(less than 25% difference) in light levels are more or less meaningless with respect to visual performance.
Other factors to take into account include:
The adaptation level of the viewer. When night adapted, a person typically will need lower overall
light levels than when day adapted.
(See section 2.1.7 for more about day
and night adaptation.)
The viewers age. The natural aging of
the human eye reduces visual acuity and
increases sensitivity to glare. Higher light
levels greatly help visual acuity, as long
as glare is controlled. Choosing light
levels ator sometimes abovethe top
level in the range is generally called for in
designing facilities for seniors. (For more
about the aging eye, refer to section
2.1.6.)
The visual size of the task. Very small
tasks, measured in visual angle according
to the procedure, may require higher light levels; very large tasks may require lower light levels. (See
section 2.1.3 for more about visual size.)
The interaction of tasks. The specific needs of adjacent tasks may appear to be in conflict, but
recognizing that light level recommendations are not absolute can make resolving these issues
easier. For instance, many jobs involve computers (Category C) and paper tasks (Category D or E).
Designers may use a task-ambient lighting design (see section 4.3.1) or dimming controls (section
8.2) to achieve an acceptable compromise.
Advanced Guideline Dynamic Light Level Selection
Ultimately, the designer chooses an appropriate static light level that
does address the potential for varying the light level based on user
preference, time of day, weather conditions and other factors. If electric
light levels can be varied, there is a significant potential for energy
savings as well as other beneficial effects. As an advanced guideline,
design lighting systems that are based on a dynamic, rather than
static, model of vision and natural light. With the ability to modulate
light levels, appropriate electric light energy is used at all times,
maintaining a minimum necessary light level and therefore, a minimum
necessary lighting energy consumption.
Example: Choosing the Lighting Level for a Cafeteria
Consider the lighting for a cafeteria (Category C, 10
footcandles). In a college, the designer might choose
Category D (30 footcandles) instead because the
cafeteria also serves as a study hall. In a middle school,
it would be reasonable to choose 20 footcandles of task
illumination because of (generally) youthful eyes.
However, in a retirement facility, the designer might
choose a light level as high as 50 footcandles after
reviewing recommendations for this specific type of
facility, especially IESNA RP-28.
design lighting
systems that are
based on a dynamic,
rather than a static,
model of vision and
natural light
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-3
For example, imagine a private office with a
south-facing window. Most days, the amount
of natural light exceeds the 30 footcandles of
task light recommended by IESNA for office
paperwork. The office may actually average
100 to 300 footcandles, and electric light may
be unnecessary. However, on particularly
dark cloudy days and at sunrise and sunset
on clear days, its necessary to maintain
these task light levels with electric lighting.
Later in the evening, a lower task light level
may be acceptable, and by the time people
arrive to clean the office, task light probably
isnt needed, and the ambient light level may
be reduced to 3 footcandles. And most
importantly, when the space is vacant, the
lights should be turned off. See Chapter 5 for
examples of lighting designs in private offices
with windows.
4.2.2 Illumination Levels Based on Light Source Spectrum
Illumination recommendations based on lumens and footcandles dont completely account for certain
effects of the spectrum of light sources. There are a number of conditions under which details of the light
source spectrum need to be considered to better reflect human vision or perception. This has surfaced as
two major concerns, one regarding interior lighting at typical indoor light levels, and the other for low
levels of exterior electric lighting at night. They are discussed below.
Advanced Guideline Interior Lighting Spectrum
The first concern centers on the optics of human vision. It has been
demonstrated (Berman 1992) that the diameter of the eyes pupil is set
by the response of the rods even at typical interior light levels, rather
than the by the cones that are responsible for focal (or foveal) vision.
Rod response is generally associated with scotopic vision (night
vision), but at the modest levels of light used for interior illumination, it
appears that rods remain active and control the size of the optical
aperture or pupil. Pupil size affects both visual acuity and depth of
focus.
The pupil of the eye becomes relatively smaller in response to light sources that are enhanced in bluish-
green light, the portion of the spectrum where rods are most responsive. Because the pupil size effect
relies on rod response it is referred to as a scotopic effect. A smaller pupil allows vision to have a larger
range of focal distance. The increased range of focus also means that less accommodative effort of the
eye is needed to bring close objects, such as reading or handwork, into focus.
Visual acuity is improved with a smaller pupil. Although the smaller pupil allows less light into the eye, at
typical interior light levels it blocks the aberrant light rays passing through the outer edge of the lens
where optical quality is poorer.
Bermans research makes use of factors called Scotopic/Photopic ratios, or S/P ratios. They are
independent of light level and express a property of the light or lamp spectrum and express the extent to
which a lamp favors scotopic effects. Sources with larger S/P ratios (such as high color temperature
fluorescent lamps) can be expected to permit a greater depth of field and better acuity than those with
smaller S/P ratios.
Example: A Dynamic Criterion for a School Cafeteria
In the example above (Choosing the Light Level for a
Cafeteria), a criterion of 20 footcandles was selected for
a school cafeteria.
Taking into account the varying needs of the cafeteria,
set the following light levels using dimming and dynamic
balancing:
Any occupied use between sunset and sunrise, 3
footcandles (basic orientation) with manual override to
20 footcandles
Between sunrise and sunset, 20 footcandles with electric
light dimming and shutoff in daylit zones.
Increased illumination for serving and bussing area
during meals, 30 footcandles.
. . . S/P ratios can
be used to
determine the
relative sense of
brightness from
different sources . . .
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-4
Table 4-1 Scotopic/Photopic ratios for Indoor Lighting Applications
Shows many common light sources. Source: Berman 1992.
Light Source
Scotopic/Photopic
Ratio
(S/P ratio) Light Source
Scotopic/Photopic
Ratio
(S/P ratio)
Low-pressure Sodium 0.20 4100K Fluorescent (RE741) 1.54
High-pressure Sodium (35W) 0.40 4100K Fluorescent (RE841) 1.62
High-pressure Sodium (50W) 0.62 5000K Fluorescent (RE850) 1.96
Clear Mercury Vapor 0.80 Metal Halide
(Thallium/Dysprosium/Holmium)
2.10
Warm White Fluorescent 1.00 6500K Fluorescent (RE865) 2.14
White High-pressure Sodium (50W) 1.14 Daylight Fluorescent 2.22
Incandescent (2850 K) 1.41 Sun (CIE D55 Illuminant) 2.28
Cool White Fluorescent 1.46 Early Sulfur lamp 2.32
Metal Halide (Sodium/Scandium) 1.49 Sun + Sky (CIE D65 Illuminant) 2.47
Quartz Halogen (~3200 K) 1.50 7500K Fluorescent lamp 2.47
In addition, the apparent brightness of a scene illuminated by white light is influenced by color
temperature. Compared to low color temperature sources, high color temperature sources produce
spaces that seem brighter. In general, a light source with a high S/P ratio will likely appear brighter for a
given foot-candle level than one with a lower level. The S/P ratio of sodium/scandium metal halide, for
example, is 1.49. Compared to high-pressure sodium (S/P ratio 0.62), the metal halide lamp could be
expected to appear brighter. However, remember that brightness is not a measure of visual acuity or
performance, and the effect of a brighter source may be undesirable for many reasons.
The primary potential benefit of this work is that we might be able to use spectrally optimized light sources
that permit lower energy consumption levels. Because designing interior lighting systems with a low
power density generally means using lower general and ambient light levels, use of sources with higher
S/P ratio might provide both greater sense of brightness and in some cases better visual acuity and
depth of field. However, while there is a growing consensus that scotopic effects are important, scientists
and researchers still disagree on the extent to which S/P ratios or other factors might be applied to
current standards for proper lighting.
As an advanced guideline, S/P ratios can be used to determine the relative sense of brightness from
different sources, and in some cases, to predict acuity and depth of field benefits. But using S/P ratios to
justify dramatic differences from conventional practices, such as using them to allow significantly lower
light levels than IES recommendations, is currently not recommended. From the standpoint of visual
acuity and performance, the current system of lumens and footcandles still serves to properly set light
levels, and S/P ratios cannot be used to change design practice in this regard.
Advanced Guideline Non-Central Vision and Brightness Perception for Large Visual Fields
The other primary concern centers on outdoor electric lighting at night.
Traditionally, lumens, footcandles and other photopic quantities have
been applied to nighttime exterior lighting conditions. This is correct
only if the visual task is viewed directly forward. When the visual task is
non-central or the perceived brightness of a large field of view is
experienced (10 degrees or greater), then both rod and cone
responses contribute to vision. Rod related vision (scotopic vision) is
significantly more sensitive to blue-green light (507 nm) than yellow-
green light (555 nm), the peak sensitivity of day vision (photopic
vision). This combination of photopic and scotopic vision, called
Mesopic vision, occurs at light levels typically found in outdoor lighting
situations such as streets and roadways, parking lots, walkways, and sidewalks. Since the lumen is
Consider using a
lumen correction
factor between 1.2
and 1.4 for modern
mercury-arc white
light sources . . . as
compared to high-
pressure sodium
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-5
based on the spectrum of photopic vision, it is now recognized that without a spectral correction factor,
lumens and all related factors (footcandles, lux, etc.) at light levels below 1.0 footcandle are not likely to
provide a full representation of human perception.
Additionally, it is widely agreed that human peripheral vision at Mesopic light levels has both rod and cone
responses. Studies at a luminance level of 0.1 cd/m (Rea et al. 1996) have shown that the off-axis
reaction time to peripheral movement under metal halide light, which has substantial blue content, is 50%
faster than under high-pressure sodium light of the same footcandle level. This research, while still
controversial, suggests that scotopically efficient sources may be preferred for many outdoor lighting
situations, especially where threats from the side are an issue, such as personal security, crossing traffic,
or animals crossing a highway at night.
Because of the renewed concern over the different spectral responses of rods and cones, it appears very
important to consider the spectrum of the light source in outdoor lighting. As an advanced guideline,
when off-axis detection and/or large field brightness perception is the primary concern, consider using a
lumen correction factor varying between 1.2 and 1.4 for modern mercury-arc white light sources (metal
halide, fluorescent, compact fluorescent, or induction lamps) as compared to high-pressure sodium. In
other words, when applied at very low light levels a 10,000-lumen metal halide lamp appears to produce
the same effective non-central exterior visibility as a 12,00014,000-lumen high-pressure sodium lamp.
Researchers and scientists dont yet agree on how to apply spectral factors to outdoor lighting standards.
For this reason, it is not recommended that lighting level standards or lighting calculations be changed to
account for the affects of different light sources. However, if research in spectral response continues on
its present course, the impact may be significant. Most importantly, sodium-based light sources, although
more energy efficient as measured in lumens per watt, might no longer be considered the most visually
efficient for outdoor lighting. This in turn might result in new lighting systems and light sources for the
majority of parking lot, parking garage, industrial, warehousing and roadway applications where high-
pressure sodium has been the preferred source for the last few decades.
4.3 Lighting Quality
Lighting profoundly affects many human reactions to the environment. These human reactions range from
the obvious, such as the dramatic beauty of an illuminated landmark or the emotional response of a
candlelight dinner, to subtle impacts on worker productivity in offices and sales in retail stores. (This
range of human reaction is discussed in more detail in chapter 2.) The profession of lighting design, which
grew from a mixture of theatrical and architectural methods, is largely valued for its ability to intuitively and
artfully provide high quality lighting, at least for projects in which appearance and mood are very
important.
An important recent trend in lighting philosophy and research is the concept that lighting quality often
plays an equal, if not dominant role, to lighting quantity. However, lighting quality is highly elusive. Despite
numerous attempts to create metrics of lighting quality, lighting quality remains a combination of
measurable physical quantities, placed together in a particular order that is highly dependent on
numerous factors involving space, finishes and activities. The current challenge for researchers is to
provide more objective metrics of lighting quality to make it possible for more successful projects of all
types.
The design procedure recommended in the ninth edition of the IESNA Lighting Handbook is based
substantially on lighting quality. It embodies the current beliefs and findings about lighting quality in a
manner that varies according to building type. Following the IESNA procedure is highly recommended, for
at a minimum it helps the designer place the proper priorities on lighting quality as a function of space.
But, unfortunately, following the procedure perfectly still cannot guarantee good lighting.
This is the dilemma facing every designer. One can design good quality lighting and yet not achieve
good lighting. Boyce (1996) helps us understand the difference by describing lighting in three quality
categories:
Bad lighting, where the lighting system suffers from a quality defect
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-6
Indifferent lighting, where the lighting system has no quality defects
Good lighting, where the lighting system is technically correct and excites the spirit of the viewer
A space with indifferent lighting quality should be the minimum design criterion for all lighting
installations because any of the causes of bad lighting can affect worker performance.
This section provides numerous advanced lighting guidelines for the lighting design criteria identified in
the IESNA Lighting Handbook, 9
th
Edition. These criteria have been organized in three general
categories:
Light Distribution, including:
Task and ambient lighting
Daylighting integration
Light pollution and light trespass
Space and Workplace Considerations, including:
Flexibility
Appearance of the space and luminaires
Color appearance
Luminance of room surfaces
Flickering light
Direct glare
Reflective glare
Lighting on People and Objects, including:
Modeling faces and objects
Surface characteristics
Points of interest
Sparkle
4.3.1 Light Distribution
Task and Ambient Lighting Overview
The most common lighting design for commercial spaces has long been general lighting, in which a single
type of luminaire is laid out in a more-or-less regular grid or pattern, producing relatively uniform
illumination throughout the room. General lighting, however, was developed and promoted in the past
based on an office norm of typing pools with no partitions in open office areas. With the advent of
systems furniture in the 1970s, task lights became an integral part of the office workstation. By far the
most common is a fluorescent luminaire attached to the bottom of a bookcase, binder bin or shelf. Many
variations on the concept have evolved since the 1970s, including luminaires with variable screens
designed to reduce veiling reflections. This type of task light remains a common part of office workstation
design.
Task lighting systems independent from the spaces general lighting systems are also found in other
building types. For instance, the display lighting in retail stores is a form of task lighting. Similarly, task
lights are used in industrial manufacturing and assembly, health care, residential lighting, and many other
interior lighting applications.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-7
However, task lights cant light the balance of the room, and thus some other type of lighting system is
needed to produce the ambient illumination in the room. There are many options, including indirect
luminaires mounted atop cabinetry or workstations, suspended luminaires, and recessed luminaires of the
type usually used to produce general light (refer to chapter 7 for detailed information about luminaires).
The key difference between general light and ambient light is that ambient light is designed to provide
approximately 33%67% of the illumination level that would have been produced by a general lighting
system.
Task-ambient lighting strategies produce energy savings in three ways. First, locating the light source
close to the task most efficiently produces the illumination levels needed for the task. Secondly, task
illumination levels dont have to be maintained uniformly though out the space, so ambient levels can be
lower. And finally, some occupants wont use their task lights, and empty offices or workstations with
absent occupants dont have to be fully illuminated, saving even more energy.
Advanced Guideline Ambient Requirements
The intent of ambient lighting is to illuminate the majority of the space
to about one-third the task illumination level. In reality, this means
providing an ambient light level of around 20 footcandles (200 lux).
This is enough illumination to permit casual task work in most
environments, and relates well to most task types requiring 5060
footcandles of task illumination.
In spaces that are subdivided by office partitions, store fixtures or other
relatively tall elements, its important to ensure that the effect of the
partitions is taken into account. Typical office partitions, for example,
employ finishes with around 40% reflectance and stand approximately 55 in. tall. Their net effect is to
reduce the average ambient illumination level by about 30%35%. Thus, an ambient lighting design
producing about 30 footcandles average illumination in an empty room is often prudent.
Ambient light shadowing and uniformity are also issues. Using common troffers, a downlighting system
producing 30 footcandles, average, will exhibit extremes of light and shadow when used in conjunction
with office partitions. Some cubicles will receive over 50 footcandles from the overhead lighting system,
and some will receive less than 5 footcandles. A negative result is very bright surfaces within the cubicle
having a troffer overhead. An overly lighted office worker, especially one wearing light-colored clothing,
can produce severe veiling reflections in the computer screen. Individually dimmable troffers can alleviate
this condition. (For more about veiling reflections, see Advanced Guideline Reflected Glare; for more
about downlighting systems, see sections 0 through 7.5.6)
Indirect ambient lighting has often been advocated because of its good uniformity. An indirect lighting
system producing an empty room level of 30 footcandles will tend to provide a comfortable light level for a
range of workers and tasks. However, indirect lighting systems require higher ceilings than troffers, and
suffer other drawbacks including possible additional cost, some lack of flexibility, and limited usability as
task lighting. Section 7.5.7 covers indirect lighting in detail.
Other forms of ambient lighting shouldnt be overlooked. Wall-washing and wall slot grazing light
produce ambient light indirectly from the wall surface (see section 7.5.2). In a gymnasium with a light
maple floor, for example, downlight from the overhead lighting system will reflect upwards, illuminating the
ceiling and upper walls.
And of course, natural light sources typically produce ambient light, at least for a portion of the space.
Daylighting can be an excellent source of ambient light, especially if its designed to provide balanced,
uniform illumination throughout a space. For more about daylighting integration, see Daylighting below.
Design ambient
lighting to illuminate
the majority of the
space to about one-
third the task
illumination level
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-8
Advanced Guideline Task Requirements
Task lighting requires concern for the direction and intensity of the
light, as well as the amount of illumination (footcandles). This is
because many tasks exhibit specular reflections that can affect
contrast. For example, gloss coating on magazines and books or
pencil on paper can cause sufficient reflection to make it impossible to
distinguish dark areas on a white background. The reader must
constantly move the task (or his or her head) to eliminate the veiling
reflections.
All tasks exhibit some degree of specularity (shininess), and as described in Advanced Guideline
Reflected Glare, the ability to see the task may be dramatically affected by the direction of the incident
light. With highly specular tasks, or tasks viewed against a highly specular background material, the
geometry of the source/task/eye relationship may be modified to improve visual performance. A typical
situation is reading a glossy-page magazine under bright lights or outdoors. At certain angles, the
reflected glare of the light source makes the print unreadable. Changing the location of the magazine, the
viewing angle of the eye, or other physical movements solve the problem. As an advanced guideline,
provide individual task lighting that is under the control of each worker, so that the individual worker can
control both when it is used, and its placement, thus source/task/eye geometry.
As a general rule, light to the sides of tasks produces maximum visibility, while light to the front of the task
produces maximum reflected glare. This basic axiom suggests orienting luminaires parallel to the
direction of view, and to the sides of the viewer. But because not all lighting systems can be moved as
desired and not all tasks can be placed where the lighting works best, compromises can be addressed
through careful analysis.
As an additional advanced guideline, consider
employing computer analysis that predicts
visibility using metrics like equivalent
spherical illumination (ESI) or relative visual
performance (RVP) for fixed tasks under fixed
illuminance sources. These metrics were
developed specifically to analyze this
situation, but unfortunately, are only useful for
flat tasks in the horizontal plane, with a fixed
viewing position and one of very few printed
tasks. Nonetheless, for the design of certain
work environments under fixed lighting
conditions with demanding tasks, this remains
a competent tool.
Some tasks, such as a lifeguard viewing
swimmers in a pool, may suffer from serious
problems of disability glare caused by
windows or skylights at certain times of day.
To assess this type of problem, consider using the rendering functions of lighting software tools like
Lightscape and Radiance. These programs are capable of dramatically demonstrating reflected glare,
and although potentially laborious to do, permit the comparison of alternative lighting systems (including
windows and skylights). Computer analysis tools are discussed in section 4.4.
provide task lighting
that is under the
control of each worker
Task Lighting Example
In a private office, providing 5060 footcandles of
general light requires about 1.2 W/ft of power using
modern lighting technology. Providing ambient light of 20
footcandles requires only about 0.4 W/ft. If two task
lights employing a 30-W compact fluorescent lamp (CFL)
are used in a 100-ft office, the total load will only be 1.0
W/ft, saving 0.2 W/ft. Moreover, the worker has
additional control, and many will choose to turn off the
overhead lights, especially if they also have a window,
saving another 0.4 W/ft. Yet the worker retains task light
levels where needed, sacrificing balanced luminance in
favor of a more appealing atmosphere and customized
personal space. See chapter 5 for additional task lighting
examples.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-9
Advanced Guideline Light Distribution on Surfaces
Lighting design ought to consider strategies for illuminating room
surfaces, but in the majority of basic lighting installations, luminaires
cause light to fall onto room surfaces somewhat randomly. For
instance, direct luminaires with sharp cutoff, such as parabolic troffers
and specular downlights, create distinctive scallop patterns on
adjacent walls. Uplights can cast spotty pools of light onto ceilings,
especially when luminaires are installed at the minimum suspension
length. Track lights and wall-washers, when not uniformly installed, can
create hot spots and unusual patterns. (For more about light
distribution patterns for specific luminaires, see chapter 7.)
The IESNA procedure suggests that distinct patterns, especially
patterns that are irregular or harsh, be avoided. Patterns in general are considered a problem, and
keeping surfaces within a brightness ratio of 3:1 is suggested to minimize the impact of patterns of
surface luminance.
As an advanced lighting guideline, designers should first review their designs for potential lighting
patterns. Clues to potential problems include:
Directional luminaires such as troffers and downlights that tend to create scallop patterns when near
walls
Uplights within 2 ft of the ceiling (unless specifically designed for a close-to-ceiling application)
Poor balance of light (ceiling, wall or floor much brighter than each other)
Walls and ceiling grids that arent aligned, with varying spacing of luminaires to walls
Wall-washing and accent lighting that is improperly located (too close to wall)
Most modern computer programs can reveal potential pattern problems. Should any of these situations
occur, study the entire surface of concern with a point-by-point or rendering program. Using aesthetic
judgment, correct any problems before completing the design. This may be quite difficult in some cases,
such as those using suspended indirect lighting and relatively low ceilings. Be prepared to change the
lighting design quite a bit to eliminate this problem. Refer to section 4.4 for information about computer
programs for lighting design.
In buildings employing daylighting, use daylight for wall-washing, not just general illumination. Daylight
can provide one of the best sources of even, vertical surface illumination. The best way to achieve this is
to make sure that any daylight aperture, whether window or skylight, is directly adjacent to a
perpendicular surface, as described in Advanced Guideline Direct Glare. Skylights or windows located
next to walls provide a very gentle and attractive wash of light across a large surface, up to three to four
times the dimension of the aperture. Roof monitors can provide very even illumination across a sloped
ceiling, as can windows that abut the surface of a ceiling. Louvers, blinds or lightshelves can also be
designed to help distribute daylight evenly across a surface. For more about daylighting, see Daylighting
below, as well as section 7.4.
Advanced Guideline Light Distribution on Task Place (Uniformity)
Almost no lighting system provides completely uniform, even
illumination. Early illumination engineering held out an ideal of
perfectly uniform illumination in a space. There was little discussion or
appreciation of the variability of lighting within space or time. The
establishment of a target average illumination, such as 50
footcandles, was often misinterpreted to mean that a minimum of 50
footcandles would be provided over every square inch of a space.
Avoid distinct
patterns, especially
patterns that are
irregular or harsh.
Keep most surfaces
within a luminance
ratio of 3:1
Design ambient
lighting so it ranges
within plus or minus
one third of the target
level ...

ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-10
In the IESNA procedure, the variation of illuminance levels is recognized. For instance, if the target
illumination level is 30 footcandles, this is considered essentially met if 67% or more of the task locations
have at least 25 footcandles. This will help designers and inspectors better understand the relatively small
significance of exact footcandle values.
As an advanced guideline, its an essential
concept that illuminance levels will vary within
a certain range. Overlighting tasks is one of
the greatest wastes of lighting energy, and
many designers have erroneously sought to
achieve the IESNAs recommended
illuminance level as the minimum, not the
average. Consistent with the IESNA
procedure, study all task illuminance values to
ensure that they are at least 2/3 of the target
value. But likewise, note task locations where
illumination is more than 4/3 of the target
value. If possible, change lighting until more
than 90% of the task locations are within the
range of the target, plus or minus one third
(range 67%133%).
As part of this process, its important to
identify the difference between task and
ambient illumination (also see section on
task and ambient lighting, above). Providing
task level illumination should be limited to
actual task locations, not averages
throughout a room. The ambient light level
should be at least 1/3 of the task level, up to
the target illumination level defined for that
space. By providing ambient light that is
typically between 1/3 and 2/3 of the target
level, and task light between 2/3 and 4/3 of
the target level, a space generally is using the
least amount of electric light energy and still
meeting IESNA recommendations.
Daylighting Integration
Daylighting is the practice of using windows, skylights and other forms of fenestration to bring light into
the interiors of buildings, using various mechanical means to control the amount of daylight, and
employing complementary lighting electric lighting systems (including controls). It is perhaps the most
demanding and challenging form of illumination, because of its variability and even more so, because of
its impact on many aspects of a building. In traditional modern building design, various disciplines tend to
work independently: architects design the mass and fenestration, structural engineers design the
structure, mechanical engineers design HVAC and electrical engineers or lighting designers design the
lighting. To design daylighting properly, integration of design and coordination among disciplines is
essential.
A number of sections of the Advanced Lighting Guidelines provide an excellent resource for learning and
applying daylighting. Chapter 5 provides example applications employing daylighting design. For details
about daylight as a light source, see section 6.3; for daylight systems, see section 7.4. Daylighting
controls are discussed extensively in section 8.4.
There are, however, some basic observations that can help lighting designers, architects and engineers
begin to understand the potential impact of lighting, and by thinking about daylighting as part of the
Example: Uniformity in Small Private Office
This example shows alternative means of providing
adequate light levels in a small private office, assuming
an office size of 12 ft x 9 ft (108 ft), 80/50/20
reflectances, illumination from two 2 x 4 lens troffers.
Based on a target task illumination of 50 footcandles:
Using the lumen method, a standard design in which
each luminaire with two T-8 lamps and standard
electronic ballasts produces 45 footcandles, the average
throughout the room is 1.11 W/ft.
Using point calculations and maintaining at least 17
footcandles ambient lighting (50 x 1/3) and at least 33
footcandles task lighting (50 x 2/3), the recommended
IESNA lighting levels can be provided using tuning (fixed
dimming) or reduced ballast factor ballasts (60% ballast
factor) at 0.76 W/ft, or 31% less than the standard
solution.
Another means of providing adequate light levels would
be to employ a single, ceiling mounted indirect luminaire
with two T-8 lamps. It will produce a relatively uniform
ambient illumination of 1820 footcandles. Then a task
light can be used to provide illumination on the task of
3366 footcandles, which can be nicely done using a
table lamp with a 30-W compact fluorescent source,
such as a circline or 2D lamp. The power density of 0.83
W/ft is still 25% less than the basic, common solution.
Refer to chapter 5 for more office lighting examples.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-11
lighting system, they can encourage the use of daylight in basic building types where the benefits can be
realized with relative ease.
The Principal Benefits of Daylight as a Light Source
Recent studies have provided at least some scientific evidence that people respond positively to daylight:
they feel better, they work better, they learn better. But even if this were not true, daylight enjoys a
significant advantage to electric light. The spectral content of natural light produces about 2.5 times as
many lumens per Btu of cooling load. And if introduced through modern high-performance glazing with a
low-emissivity (low-e) coating, which removes some of the infrared energy, natural light can produce
almost three times more illumination for the same cooling load of electric light. So if daylight is employed
that produces light levels comparable or even higher than electric lighting, and electric lights are
extinguished, daylit portions of a day-use building can be illuminated by saving almost all of the electric
lighting energy and about half of the energy needed to cool the building load created by the lights.
Moreover, the savings tend to coincide with energy peaks on hot summer days.
Daylighting also has many other advantages that augment the lighting quality in a space, as discussed in
section 4.3 Lighting Quality. These include being a flicker-free, scotopically rich, full-spectrum light
source, with excellent three-dimensional modeling characteristics. The fact that daylight varies can be an
advantage, for adaptation problems in interior spaces are often caused by a persons moving between
indoors and outdoors, and the interior ambient level in a daylight space should vary directly with the
exterior light levels.
Placing Daylight in Lighting Terms
Daylighting in architecture tends to be employed by architects in pursuit of the aesthetics and human
factors of daylight. Just having daylight is not energy efficient, even if electric lights are extinguished (and
too often they are not). Like bad electric lighting, daylighting can introduce numerous lighting and energy
problems. Lighting designers should at least check proposed daylighting schemes to ensure that the
architectural design does not create problems.
The primary energy issue is introducing a controlled amount of daylight such that the additional cooling
load of the daylight is less than the cooling load of electric lighting that is turned off or dimmed during
daylight periods. As a rule of thumb, the average daylight illumination level under peak conditions should
not exceed 3 to 5 times the appropriate electric lighting level for the space. Excessive daylight increases
the cooling load for the space and requires larger more expensive heating, ventilating and air-conditioning
(HVAC) equipment. In other words, in a space where an appropriate electric light level is 50 footcandles,
having average daylight levels in excess of 250 footcandles is probably inefficient design. The point at
which daylighting becomes an energy problem varies considerably depending on climate, architecture,
and other factors, but designers should be aware of the potential problem.
Its also important to consider the quality of daylighting. Like electric illumination, daylight can cause
disability glare, discomfort glare, and other problems. For instance, a skylight should be shielded, just as
if one were using a downlight. A standard, commercial skylight 4 ft x 8 ft introduces more average lumens
than a 1000-W metal halide lamp. Think of the skylight well as the shielding of an electric luminaire.
Likewise, employ a refracting lens or diffuser in the skylight to prevent hot spots of light in the room from
direct sun. Remember that daylight control on the east, south and west exposures is critically important in
controlling daily and seasonal light changes, especially the potential for glare. For more about shielding
strategies for daylight systems, see section 7.4.
Advanced Guideline Daylighting Integration and Control
Most buildings have some windows and other potential forms of daylighting. For example, classrooms
can easily be designed to provide adequate daylight throughout most of the year. Winter mornings, rainy
or snowy winter days, and evenings are the only time most electric lights should be needed in the
average classroom (see examples in chapter 5). Similarly, most single-story commercial buildings could
easily be daylit through the use of skylights. These daylight strategies can save substantial amounts of
energy during peak daylight periods if the electric lights are reliably turned off. Occupants have been
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-12
observed (Lowe, Rubinstein) to leave the electric lights off or choose lower output options if there is
sufficient daylight in the space when they enter the room. However, for truly predictable energy savings
from daylighting, the use of automatic photocontrols is needed. The presence of daylight does not deter
the occupant of a space from turning on lights and defeating the system.
No energy codes in the United States currently require automatic
daylighting controls, although buildings are required by most
energy codes to provide separate switches for daylit zones to
encourage occupants to harvest the savings. To date,
photocontrols have not been considered sufficiently cost effective
in all cases to make them a code requirement. However, the cost
of dimming ballasts and photocontrols has been dropping rapidly
in the past few years, making their use ever more attractive.
Dimming ballasts offer the opportunity of other control strategies
as well. There are a number of simple strategies that can be
pursued now that will make daylight integration more widely
successful. Future energy codes are expected to require dimming
ballasts and automatic daylighting controls.
As an advanced guideline for daylit offices and other workplaces
with fluorescent lighting, the designer might begin by equipping
every luminaire with a dimming ballast. Ballast costs are
sufficiently low to make this worth pursuing, since daylighting, tuning (fixed light maximum) and dimming
(adjustable light levels) are then possible. Any of the modern dimming ballast systems are probably
acceptable if implemented with sensors and control circuits. However, if designing the building for future
controls circuits, as in a tenant-occupied building, consider using the 010 volt dimming ballast as it
presently permits the widest range of sensors from a variety of manufacturers.
As a budget option, at least consider using multilevel electronic ballasts that permit switching light levels
using a simple switch circuit. Using multiple lamp luminaires and switching them to provide variable light
levels is an excellent and cost-effective design strategy for many space types, especially large areas
without stationary tasks. For instance, instead of HID industrial downlights in a daylit retail store, consider
using downlights with multiple CFLs having separate ballasts.
The most important basic step toward daylight integration is to make sure that branch circuit wiring be
designed to provide independent switch legs for each daylit zone. Circuiting should follow the contours of
daylight illumination in the space. This will enable daylighting control to be provided at the lowest cost
regardless of when the actual controls are added. See section 8.4.3 for more information.
For each project, seek out additional cost-effective and reliable ways to harvest daylighting savings. The
key to success is designing a system that is reliable, simple and effective. A system requiring minimum
commissioning is probably best, preferably a system that will work well right out of the box and will even
improve if properly commissioned. Improvements to daylighting controls are rapidly evolving, and the
advanced designer needs to stay abreast of the latest developments. Meanwhile, dont be afraid to have
a system that is not optimizedif it has the potential to be saving 70% but it is only saving 50%, use it
anyway.
for daylit workplaces
with fluorescent
lighting equip every
luminaire with a
dimming ballast or
multilamp switching
Circuiting should follow
the contours of daylight
illumination in the
space
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-13
Advanced Guideline Light Pollution and Light Trespass
In outdoor lighting, an electric light usually illuminates more than just
the intended area. Through lack of optical control or overlighting, stray
light also illuminates adjacent properties. This light can become
offensive if unwanted, and it has become known as light trespass.
Once believed to be a minor problem usually involving tennis courts
and commercial establishments in expensive neighborhoods, light
trespass has become recognized as an area of significant concern
and perhaps even future regulation.
In a related problem, electric lights emitting light upward or reflecting
light upward cause a condition called light pollution. Light pollution
causes moisture and particles in the air to glow at night. It creates the
unfortunate sky glow of cities, obscuring the stars from view. See
sections 3.2.4 and 3.2.5 for an overview of the environmental impacts
of light trespass and light pollution, respectively. For a discussion of
advanced outdoor luminaires, see section 7.6.
In the IESNA procedure, both light trespass and light pollution are
recommended concerns for the lighting designer. As an advanced guideline, its important to realize that
both problems involve energy, and directly or indirectly pollute in a number of ways. Several steps should
be taken to avoid or minimize light trespass and light pollution:
Use night lighting only when and where necessary. Design exterior lighting to meet, but not exceed,
the IESNA design guide. Overlighting directly contributes to light pollution and is often related to light
trespass.
Use the minimum amount of light needed rather than the maximum. Provide uniform lighting with
good distribution that avoids wasteful hot spots. Design for the lowest maintained illuminances that
will produce the desired effects.
Use sources with cutoff optics that restrict light to the intended area of illumination.
In many cases, use more sources, each of lower wattage, to improve uniformity in the intended
illumination area and minimize trespass into adjacent areas.
Use sharp cutoff light sources and other means to eliminate light directed upwards or sideways.
Consider full cutoff luminaires that emit no light above 90 degrees (horizontal). (It may be possible
to reduce light pollution by using cutoff or semi-cutoff luminaires spaced farther apart than full cutoff
luminaires can be spaced to achieve the same uniformity. This is controversial but deserving of
analysis.)
Use lighting strategies that allow nighttime adaptation of the eye to very low light levels. Unless
security is an issue, focus on wayfinding with very small points of light, rather than illumination of
large areas. In signage and retail, use color contrast to attract attention, rather than high levels of
illumination.
Use timers and occupancy sensors to limit the use of outdoor lighting to only the minimum time
required for the purpose. Most outdoor lighting can be shut off or switched to a minimum level after 10
PM or 11 PM. Use astronomical time clocks or energy management system (EMS) controls to switch
lights off, rather than simpler photocells that only switch lights on at dusk and off at dawn (see chapter
8).
Consider a layered approach. This might involve one set of full cutoff luminaires that provides the
low-level utilitarian lighting (for example, street lighting from tall poles spaced 120 ft apart), and
another set of luminaires that produces more decorative effects or provides pedestrian-scale light (for
example, traditional-style glowing post-top luminaires on 12 ft poles). The second set of luminaires
can use low-wattage lamps, and can also be shut off at 11 PM, leaving the utilitarian lighting burning
all night for security purposes.
Use night lighting only
when and where
necessary
Use the minimum
amount of light needed
rather than the
maximum
Use sources with
cutoff optics that
restrict light to the
intended area of
illumination

ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-14
Avoid development near existing astronomical observatories; when outdoor lighting is unavoidable,
apply rigid controls. Consult with the observatory on needs for specific spectral control and shielding.
Locate outdoor lighting below tree canopies, not above. The leaves of the trees then shield the light
from the sky.
Provide reflective surfaces for lettering or other elements that need to be illuminated at night.
Illuminate only the lettering, not the background.
Light from the top down, rather than from the bottom up. In signage lighting and building facade
lighting, consider lighting from the top to reduce stray uplight. Spilled light is at least reduced by
reflection from the ground before it is directed to the sky.
Many cities have light pole height ordinances designed to prevent light trespass. In general, pole height is
not the primary issue; rather, cutoff and shielding determine the quality and control of light. Avoid purely
ornamental exterior luminaires, ordinary floodlights, and similar light sources that have a minimum of
optical control.
4.3.2 Space and Workplace Considerations
Advanced Guideline Flexibility
The preservation of lighting and daylighting
systems throughout their useful life is an important
measure of sustainability. The ability to rewire or
reconfigure an office building as easily as a living
room is often viewed as ideal. Furthermore, an
advanced perspective recognizes that the one-
size-fits-all approach to lighting can be very
wasteful. Redundant systems that allow different
uses of the space may save energy and materials
over the long run.
Advanced lighting designs should be flexible enough to ensure that:
Lights operate where needed, and are off where not needed, as people move around within a space
and use rooms in different ways. Lighting designs employing occupancy sensors and other methods
of ensuring this flexibility are the most sustainable. Also, ensure that changes in tasks can be
accommodated with changes in light level, through dimming, for example. Controls are discussed in
detail in chapter 8.
Spaces used for hotelingthe occasional or transient use of a workspaceremain dark unless
needed. Hoteling requires lighting and controls that permit these workspaces to function
independently of the remainder of the space, and generally requires a combination of control flexibility
and design in which dark areas do not negatively influence ambient light quality in general.
The lighting system can be rapidly reconfigured to match a changed floor plan or accommodate a
different space use, and still operate at maximum energy efficiency. This philosophy suggests
mechanical and electrical flexibility. Consider modular wiring and re-mountable lighting systems to
attain this flexibility. Many manufacturers are developing plug and play lighting systems that feature
this ease of reconfiguration. Also, consider using lighting systems that serve reasonably well in all
anticipated uses so as to reduce the likelihood of needing a different type of luminaire when the
reconfiguration occurs. Common troffers (lens and parabolic) are among these jacks of all trades.
The lighting system permits multiple uses and on-demand flexibility in multiple-use spaces such as
conference rooms and modern A/V classrooms. Multiple separately controlled or dimmed circuits can
allow sufficient flexibility to meet the rooms various arrangements.
Most modern lighting systems intended for commercial use are designed to be as flexible as conventional
lay-in ceilings and common wiring permit. Far too many luminaires are installed in inappropriate locations
Consider use of:
Easily re-configured controls
Portable luminaires
Modular wiring
Lighting tracks
Lightweight suspended luminaires
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-15
because they are perceived to be immovable or too expensive to move, when in fact the luminaire is
wired by a flexible whip permitting relocation in a few minutes. Even track luminaires are usually not
moved once installed. For more information about specific luminaires, see chapter 7.
To design lighting systems that achieve the desired flexibility, consider these options in selecting lighting
systems:
Employ a control system that is easily reconfigured and commissioned
Use portable lighting equipped with a cord and plug
Use a modular wiring system
Use a lighting track or busway
Use lightweight luminaires suspended from the ceiling
Advanced Guideline Appearance of Space and Luminaires
In the IESNA design procedure, the appearance and style of the
luminaire play a major role. Throughout the history of lighting,
thousands of different types and styles of luminaires have been built.
Architectural, interior design or landscape architecture issues typically
limit luminaire choices to a particular style that is suitable for the
project. Some lighting equipment has been utilitarian (like the keyless
socket) but until the era of the recessed luminaire, most lighting
equipment complied with the architectural style of the building.
Modern projects may permit the designer greater latitude in selecting
among recessed luminaires as well as more traditional luminaires.
Luminaire efficiency and the ability to use efficacious sources have
become increasingly important criteria for selecting luminaires. Once seen as a tradeoff between
aesthetics and appearance, attractive traditional and contemporary luminaires are available at many price
levels.
As an advanced guideline, the designer should be constantly challenged to find lighting systems that
embody the projects style or aesthetic, but to do so using high-efficacy sources and efficient principles.
For instance, choose among decorative luminaires that hide the light source, such as a diffusing bowl.
Avoid luminaires such as crystal chandeliers that require lamps with bare incandescent filaments
unless, of course, a replacement in appearance for the bare filament can be employed, such as an LED.
See chapter 7 for an in-depth discussion of luminaires.
find lighting
systems that embody
the projects style or
aesthetic while
using high-efficacy
sources and efficient
principles
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-16
Advanced Guideline Color Appearance
The appearance of color, both in terms of chromaticity (color
temperature or degrees Kelvin) and color rendition (CRI), are important
in the overall feeling of the space, and in some instances can have a
dramatic effect on visual tasks. The IESNA design procedure requires
the designer to consider both chromaticity and CRI as key components
of a design. Section 6.2.4 covers chromaticity and CRI in detail; below
is brief overview of design considerations related to color appearance.
Chromaticity
A preference for a narrow range of source color temperature has been
established and appears to coincide with design practice. Known as
Kruitofs Curve, in general the lower the ambient light level, the lower
the preferred color temperature range. Most commercial illumination
levels coincide with an acceptable color temperature range of 3000K to
4500K.
Color temperature preference may be affected by latitude. The color
temperature of light can affect perceptions of thermal comfort. Modern
practice in commercial settings in the United States, such as offices and grocery stores, appears to favor
a cooler source (4100K) in the southernmost U.S., an intermediate source (3500K) in the majority of the
country, and a warmer source (3000K) in northern states. By volume in T-8 lamps, the most popular color
temperature is 3500K throughout the U.S.
This does not eliminate consideration of other color temperature lamps. As noted in section 4.2.2, high
color temperature lamps tend to add scotopic benefits, and T-8 lamp products are available at 5000K
and 6500K. In addition to scotopic effects, high color temperature lamps tend to better match natural
daylight, which varies between 4000K and 7500K for most of the day. When used in a daylit space, warm
color temperature lamps can appear noticeably pinkish or yellow in comparison to the daylight. But at
night, the cool lamps may appear unnatural; this factor should be taken into consideration in the design.
Because fluorescent and CFLs can be obtained in matching colors, its good practice to match light color
whenever possible. This is generally extended to include 3000K halogen and metal halide lamps and
4100K metal halide lamps, which can generally be matched to fluorescent lamps of corresponding color
temperature.
Color Rendering
Color quality is generally assessed using Color Rendering Index (CRI), a scale having a maximum rating
of 100 for reference sources like natural daylight and laboratory-quality incandescent light (see section
6.2.4 for more about color rendering). Ordinary incandescent and halogen sources and unfiltered natural
daylight are often CRI 100 (or extremely close). Designers should be aware that modern high
performance windows modify the color of daylight, and both correlated color temperature and CRI can be
affected. Specially tinted glazing such as green or bronze can produce dramatic color change with
comparatively lower CRI. (See section 7.4.2 for more about tinted glazing.)
Most other electric light sources, especially energy-efficient sources, have CRI that is lower than 100.
Current practice is to employ sources having CRI of at least 70 for most applications. Recent advances in
fluorescent and HID technology make light sources of CRI over 80 quite practical; these should be
employed whenever possible.
There are specific lamp products that produce light of extremely high CRI, in the range of 90100. These
lamps tend to be more expensive and have lower lumen output than 8089 CRI lamps, so the relative
benefit of their use is limited to special applications where critical color discrimination is required, such as
fine art and graphics art studios, textile mills, etc.
use light sources of
CRI 80, or better
employ color
balanced efficient
alternatives to
eliminate incandescent
lamps
work with higher
color temperature and
higher CRI sources to
produce beneficial
vision effects
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-17
Design Considerations
As a basic concept in energy-effective lighting, the designer should use efficacious sources in as many
applications as possible. Color appearance has long been a major issue, as most people still associate
fluorescent light with the unfortunate cool and greenish hue of cool white lamps. The key to more
energy-effective design is to employ efficient full-size fluorescent, compact fluorescent, and HID lamps to
create spaces balanced at various color temperatures in order to eliminate incandescent lamps.
Whenever possible, however, a higher color temperature such as 4100K or even 5000K will permit
realization of the scotopic effects.
Use Table 4-2 as a guide to color temperature selection for lighting designs using high efficacy lamps.
Table 4-2 Preferred Color Temperature Ranges
Lamp CCT (Kelvin) Applications
<2500 Bulk industrial and security (HPS) lighting
25003000
Warm
Low light levels in most spaces (<10 footcandles). General residential lighting. Hotels, fine
dining and family restaurants, theme parks. Suitable high-efficacy sources include
fluorescent and compact fluorescent, 2700K or 3000K and halogen IR lamps.
29503500
Neutral
Display lighting in retail and galleries; feature lighting. Suitable high-efficacy sources include
halogen IR, white sodium, and ceramic metal halide.
35004100
Cool
General lighting in offices, schools, stores, industry, medicine; display lighting; sports
lighting. Suitable high-efficacy sources include induction, fluorescent, compact fluorescent
and metal halide.
41005000
Very cool
General lighting in offices, schools, stores, industry, medicine, and sports lighting. Also
special application lighting where color discrimination is very important. Suitable high-
efficacy sources include induction, fluorescent, compact fluorescent and metal halide.
50007500
Cold
Special application lighting where color discrimination is critical; uncommon for general
lighting, Suitable high-efficacy sources include fluorescent, compact fluorescent and metal
halide.
As an advanced concept, designers can work with higher color temperature and higher CRI to produce
beneficial vision effects, which, in turn, may permit the selection of a lower overall illuminance level. But
this must be carried out in a manner that does not destroy the ambience of the space. Using 4100K
instead of 3000K or 3500K, for instance, will appear brighter and may produce slightly higher visibility,
especially if the source is a rare-earth fluorescent or metal halide with significant blue output.
Ideally, although it is presently difficult to achieve, the color of electric light, as well as its intensity, would
shift in a natural manner, following the patterns of daylight. The highest light levels would be provided by
day at 5000K, dimming at dawn and dusk continuously down to 2500K or less before taking on a
nighttime appearance. At low light levels, low color temperature sources appear most natural, especially
for interior residential and hospitality spaces, but higher color temperature sources, like moonlight, offer
better visibility.
Advanced Guideline Luminance of Room Surfaces
Technically, luminance thoroughly describes the visual scene and
should be the primary design metric. The problem is, luminance is not
easily measured and calculations are complex and time consuming.
Because luminance depends on the reflectance of the surface, its
highly dependent on exact knowledge of architectural and interior
finishes. Most footcandle-based standards are simplifications and
approximations of true luminance-based design and analysis.
The IESNA design procedure recommends that luminance be
considered as part of the design. As a basic premise, the design
criteria suggest that wall and ceiling luminance be close to task
luminance. The luminance of the task backgroundtypically white
papershould be used as the basis and in general, room surfaces
use light colored
room surfaces and
minimize the use of
dark surfaces
ensure that the
average room surface
luminance is at least
10% of the task
background
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-18
should be between 1/10 and 10 times this
level, preferably less than the task.
Luminance, being a quality of the room
surface as well as light, places critical
elements outside of the lighting designers
hands. Periodic trends in interior design
introduce dark paints and finishes. These
trends contribute to difficulty in producing
energy-effective design by increasing
lighting requirements to raise surface
luminance into the comfortable range.
As an advanced guideline, the lighting
designer should:
Encourage the use of high diffuse
reflectivity (light colored) surfaces and minimize the use of dark surfaces. Work with building owners,
architects and interior designers on this key issue to improve the efficiency and cost-effectiveness of
the building.
Use computer modeling to ensure that the average room surface luminance is at least 10% of the
task background. See section 4.4 for information about computer modeling.
With indirect lighting systems, use computer calculations to check for uniformity, and try to maintain
10:1 luminance ratio or better.
Luminance is also a concern with respect to computer screens. Extremely bright or unevenly lighted
surfaces can cause unwanted reflections in CRT-type (cathode ray tube) computer screens. As with
paint, the best solutionsflat-faced CRT screens or flat active matrix screensare beyond the control of
the lighting designer. For average situations with undefined monitors, a sufficiently bright wall can easily
be a reflected veiling image in a computer screen. For this reason, wall luminance and uniformity can be
an issue in the computer work environment. As a general rule, the upper wall luminance should match the
ceiling luminance, or at least not be significantly different. See Advanced Guideline Reflected Glare for
more strategies for reducing reflected veiling images.
Light-colored walls and room surfaces greatly improve the efficiency of every lighting system, including
daylighting. Luminous ratios between windows and walls can be greatly reduced through the use of light-
colored walls, and by making sure that the window abuts a perpendicular wall. Windows that create a
punched hole in a wall are the worst offenders of luminance ratios, and often require non-efficient
measures to correct the poor lighting quality. The Daylight Systems section (7.4) discusses this issue in
greater depth.
Advanced Guideline Flicker and Strobe
The visual system has a range of sensitivities to flickering light,
depending on illumination levels and the size of the flickering object.
Above a certain frequency flickering light is perceived as steady. The
focal system can detect flicker up to about 60 Hz (the critical fusion
frequency), but the peripheral system can only detect flicker up to about
18 Hz, with a peak sensitivity at 15 Hz (IESNA 2000, 3-20).
Flicker becomes the most troublesome when two cycling systems
interact with each other to produce light modulations at frequencies
approaching 15 Hz. This can happen with the interaction of computer
screens or rotating equipment with electric lights that also have a strong
oscillating light output. Oscillating light levels from a single fluorescent
or HID lamp is most likely to be associated with these problems.
Example: Back Wall Illumination in Open Office
In open-office lighting design, the illumination of the
interior or core walls is critical in producing balanced
luminance. A typical off-white wall (70% reflectance) can
be washed to a vertical illumination level of about 20
footcandles and will achieve a luminance level of about
1/3 the task luminance for ordinary paper tasks.
However, if the wall were to be painted a saturated blue
(7% reflectance), achieving the same level of luminance
would require 10 times as much electric light energy.
For more examples of office lighting design, see
chapter 5.
eliminate from
consideration any
light source that does
not operate on DC,
high frequency AC
(greater than 30
kilohertz), or AC
square wave

ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-19
The degree of oscillation from a lamp is a function of lamp type, type of phosphor coating, lamp
configuration, type of circuit, and type of ballast. Fluorescent and HID lamps on magnetic ballasts flicker
at a rate that is twice the line frequency (120 Hz in the United States and 100 Hz in Europe and southeast
Asia). Recent studies comparing office worker performance under various fluorescent lighting systems
have found a small but noticeable improvement in performance under electronic ballasts over magnetic
ballasts (Veitch 1998). This finding is consistent with the theory that a reduction in flicker, such as occurs
with electronic ballasts operating at 20kHz or more, should improve performance.
There is some evidence that flickering lights can cause headaches and other problems in sensitive
individuals (for more about possible health effects, see section 2.2.6). In some applications, flickering
lights can cause dangerous conditions in work areas with rotating or moving parts. The IESNA Lighting
Handbook makes a relatively broad condemnation of flickering lights.
As an advanced guideline, consider every possible way to eliminate flickering electric lights (except of
course for signs and glittering lights, such as in casinos). For instance, eliminate from consideration any
lamp or light source (other than incandescent) that does not operate on DC, high frequency AC (greater
than 30 kilohertz), or AC square wave.
See sections 6.5 and 6.6 for more information about flicker and strobe effects associated with fluorescent
and HID sources, respectively.
Advanced Guideline Direct Glare
Direct glare is caused by a view of the light source, often with high contrast to the surroundings. While the
bare light bulb is technically the most efficient luminaire because it has no internal losses, its a poor
choice in almost every application because the glare from the bulb walls is visually disabling. Thus, the
control and distribution of light from a source is an essential characteristic of its visual efficiency. Glare is
associated not just with lamps, but also with daylight, especially when one is exposed to low angle, direct
sunlight. Any excessively bright source, not just electric lamps, but also low-angle sunlight or overly bright
luminance, can cause glare from windows or skylight diffusers. IESNA design guides promote modest
ratios of brightness.
As an advanced guideline, its important to understand that there is not
a clear-cut line between comfort and glare. For instance, many people
will happily work away in a daylit space with a window, turning their
backs to the sun and avoiding the glare while generally enjoying a
cheerful space. In other cases, people will tolerate some glare as long
as it contributes to an overall impact of sparkle or a festive mood. Yet a
modest difference in brightness caused by an unattractive source like a
lens troffer is often deemed too much glare.
In other words, there is acceptable glare and unacceptable glare, and the definition is not quantitative but
qualitative. In general, be more concerned about glare caused by fluorescent lamps, lenses, and other
overly bright sources of manmade light. (Chapter 7 provides more information about glare issues related
to specific types of luminaires.) Be less concerned about the glare of sunlight and small point sources like
incandescent filaments. Be the most concerned about sources of glare in relation to stationary tasks
when the building occupants cannot easily relocate themselves or their task.
Be the most
concerned about
sources of glare in
relation to
stationary tasks
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-20
The first most important step to avoiding glare in daylighting
applications is to always arrange for a window or skylight to be next to
a surface that will diffuse its light. Avoid punched holes in walls or
ceilings. A window next to a wall will balance luminance ratios between
indoors and out. A splayed skylight well will balance luminance ratios
between the ceiling and the skylight.
The second most important step to avoiding glare in daylighting
applications is to balance the illumination levels in the space with a
source of daylight from at least two directions. Very bright illumination
from a window can be balanced by daylight from a window or skylight
on the other side of the room. Redirecting daylight, through the use of
blinds, lightshelves, or special glazings can also help to balance
luminance ratios, and thus reduce glare. For further discussion of glare
and daylighting, see section 7.4.
Occupant control of light sources is also an important strategy in
reducing the impact of glare. Adjustable task lights and individually
dimming ceiling luminaires provide control over glare conditions from
electric lighting. Individually controllable window blinds and curtains
provide occupants with the opportunity to adjust lighting conditions to their particular needs and wants.
When feasible, such personal control of lights will greatly reduce the negative impacts of potentially
glaring sources. For more about controls, refer to chapter 8.
Advanced Guideline Reflected Glare
Disability glare and veiling reflections have long been associated with
gloss-coated paper, pencil paperwork and the computer CRT (cathode
ray tube) screen. All can create specular reflections that can cause
glare, either reducing comfort or disabling the workers vision in
particular areas.
Indirect lighting, by creating a diffuse and uniform illumination, has
been advocated as a solution to preventing reflected glare in
workplaces. However, if properly located and shielded, direct lighting
systems and especially, two-component lighting systems (see task and
ambient lighting discussion in 4.3.1) may provide the best overall
results in preventing reflected glare. Direct and indirect luminaires are discussed extensively in section
7.5.
As an advanced lighting guideline, after the lighting system has been optimized to minimize glare,
consider modifying the task to eliminate any remaining glare problems. The computer CRT screen, for
example, can be changed to a flat screen, either CRT or active matrix, to minimize or eliminate specular
reflections from ceilings and upper walls. The angle of the screen can be adjusted to further minimize
these problems (see sidebar below, Veiling Reflections in Computer Screens). Use of ink, rather than
pencil, virtually eliminates reflected glare problems with paperwork. Use of matte-coated or uncoated
paper, rather than gloss-coated paper, prevents glare reflections in printed material. Similarly, reflected
glare from polished floors or shiny conference room tables can be avoided by changing the finish.
Lacking these options, the designer should utilize source/task/eye geometry studies to eliminate or
minimize the impact of reflected glare (see Advanced Guideline Task Requirements). In addition, pay
close attention to room surfaces and finishes and either design light accordingly or change the finish (see
Advanced Guideline Luminance of Room Surfaces). For instance, unfinished or matte-finished wood
can be wall-washed using relatively generic equipment, but if a satin or gloss finish is applied, a more
sophisticated and (probably) less energy-efficient grazing light technique must be used to avoid a harsh
reflection to the viewer.
always arrange for a
window or skylight to
be next to a surface
that will diffuse its
light
Avoid punched holes
in walls or ceilings
Balance the daylight
illumination levels in
the space with a
source of daylight
from at least two
directions
modify the task to
eliminate glare
problems
Use a flat adjustable
computer screen to
eliminate specular
reflections
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-21
The reflection of interior lights and objects in selectively coated glazing can produce another type of glare.
Designers should consider optical coatings that minimize these reflections, especially if there is a desire
to see through windows at night.

VEILING REFLECTIONS IN COMPUTER SCREENS
The lighting industry has given much attention to the problem of avoiding veiling reflections in computer
screens. This was a dramatic problem with the advent of the early black-screened monitors, where a
reflection of a bright luminaire against the dark background could make large areas of information difficult
or impossible to see. With the introduction of white-based screens, with flatter and diffusing glass, this
problem is somewhat ameliorated, but remains an important concern. Standards for designing office
space appropriate for white cathode ray tube screens are addressed in the IESNA Lighting Handbooks
recommended practice RP-1.
The computer industry continues to advance at a rapid pace. Many current innovations are directed at
developing smaller, flatter, higher resolution and lighter weight display devices to make viewing
information easier under all kinds of conditions. With laptop computers came the introduction of liquid
crystal display (LCD) screens, which are now spreading to standard desktop applications. Features such
as easy adjustability of the angle of view, a matte surface and a flat screen make veiling reflections easier
to avoid.
Computer users now also have the option of ever larger display screens and higher resolution to solve
visibility problems. (A side benefit of flat screen LCD screens is that they consume much less power than
conventional CRT screens, thus saving energy as well.) Speaking computers are also giving visually
impaired users more access to computer technology. Simultaneously, an ever-expanding array of
handheld devices is bringing numerous LCD micro-screens into the workplace, on telephones, watches,
calculators and personal digital assistants (PDAs), adding another visual challenge. The technology of
computer-based tasks promises to continue to evolve faster than the lighting industry can develop
generalized illumination guidelines in response to these new technologies.

Figure 4-1 LCD Screens in the Workplace
There have always been at least three ways to solve a visibility issue: enhance the illuminance conditions
(with more appropriate light), enhance the vision of the viewer (with corrective lenses), or improve the
visibility of the task. The computer industry itself has been the major source of innovations to resolve
visibility issues and making computers as easy and trouble free as possible.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-22
4.3.3 Lighting People and Objects
Advanced Guideline Modeling of Faces or Objects
In human vision, shadows and highlights enhance the perception of three dimensions. Both are the
products of directional light sources. The sun and the moon produce well-defined shadows, and are
considered dramatic and attractive light sources.
Diffuse light, like the light from a cloudy sky, produces an even light
that is relatively shadow-free. Once considered desirable, it is now
realized that shadow-free light can fail to render changes in surfaces
making a space or task less visible. To model a surface for better
recognition of its shape and features, in general some percentage of
directional light is considered important.
As an advanced guideline, designers are encouraged to consider
using a blend of direct and indirect lighting in most designs to provide a
combination of comfort and modeling. The percentage of direct
component will vary according to the project requirements, but to
achieve a minimum of modeling, directional light for an object or area
of interest should be at least 2025% of the total illumination. Section
7.5 provides specific information about direct and indirect lighting
systems.
Daylighting in buildings often provides a highly directional source of light, and excellent three-dimensional
modeling. The provision of a window within a space will create highlights on three-dimensional surfaces.
A skylight overhead provides a very natural sparkle on the tops of objects. Since light from a window is
primarily traveling in a horizontal direction, it can provide excellent
facial modeling. For more about daylight as a light source, refer to
section 6.3; for information about daylight systems, see section 7.4.
Shadows are particularly important in rendering three-dimensional
forms in space. For instance, in designing facilities for care of the
aging, shadows are essential in revealing steps and grade changes,
wall edges, and other basic building elements that the younger eye has
less difficulty seeing with ordinary lighting. In such cases, contrast can
definitely improve visibility. (See The Aging Eye, section 2.1.6, for
more about special visibility needs for the aging.)
Advanced Guideline Surface Characteristics
In recognizing the benefit of surface revelation, the new IESNA procedure demonstrates a modern view
of the role of lighting design in architecture. Once limited to special buildings and projects, lighting
techniques that reveal architectural nuance like texture enhance visual
perception, and have become more commonly requested by building
owners and architects.
As an advanced guideline, employ light rendering programs like
Radiance or Lightscape to confirm the effect of lighting designs in
rendering building surfaces and other surface characteristics. This is
where the power of these tools is unmatched in the profession. The
ability to illustrate the revelation of texture, specularity, color and pattern is a compelling tool in studying
and presenting these lighting techniques. These tools are described in section 4.4.
Advanced Guideline Points of Interest
It has been long recognized in retail and museum lighting design that the human eye is attracted to the
brightest points, and in comparison, dark areas are hardly looked at. As a primary design tool in these
Use lighting
techniques that reveal
texture to enhance
visual perception
Daylighting often
provides a highly
directional source of
light, and excellent
three-dimensional
modeling
blend direct and
indirect lighting to
provide a combination
of comfort and
modeling
the direct component
should be at least 20
25% of the total
illumination
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-23
types of spaces, designers use highlights of up to 10 times the ambient light level to draw attention to key
displays.
Less recognized but equally important, most award-winning lighting designs employ contrast and non-
uniform illumination in an artful manner to achieve aesthetic purposes. Techniques range from the
illumination of room surfaces or objects, as in wall-washing or cove lighting, to the use of bright sparkling
elements, such as crystal chandeliers.
As an advanced lighting guideline, recognize that its wasteful to create
more lighting than is needed. Carefully select highlights, and use a
minimum effective highlight level. Strategies include creating highlights
in contrast to lower ambient illumination levels and creating highlights
with efficient sources as close to the object or surfaces as possible.
Small points of light from fiber optic sources or LEDs may offer efficient
ways to create highlights or attract attention where specifically desired.
The high levels of illumination that are easily achievable from
daylighting are a very energy efficient way to provide highlights and
focus attention. For example, the center of a store can be daylit with
skylights, pulling customers deeper into the store, or central circulation
areas can receive high illumination levels from daylight, emphasizing
their central importance in the building. Such designs should carefully consider alternative nighttime
illumination strategies from electric sources that do not try to duplicate the high level of illumination
available from daylight.
In chapter 5, the grocery store and specialty retail store applications provide examples of the use of
highlights in lighting design.
Advanced Guideline Sparkle/Desirable Reflected Highlights
Sparkle and related reflected highlights have recently been recognized as essential elements of lighting
design. These issues are often very similar to those discussed in Advanced Guideline Points of Interest.
However, there are many commercial and industrial tasks where highlights are critical to the work.
Workers often use specular highlights to judge workmanship, assess surface quality, and evaluate the
quality of materials. As an advanced guideline, assess these nuances of task work and employ lighting
systems that enhance, or in some cases conceal these effects. Computer modeling using Radiance or
Lightscape can prove to be an exceptional tool. See section 4.4 for more about computer modeling tools.
4.4 Implementation
This section describes tools and methods for making lighting calculations (4.4.1 and 4.4.2) and evaluating
the cost effectiveness of design alternatives (4.4.3).
4.4.1 Lighting Analysis Tools
Introduction
Lighting calculations have always been part of the basic practice of illuminating engineering. Calculations
using a simple hand calculator (or slide rule) were once common, but the results of this type of calculation
are limited to broad generalizations and averages. These days, computer calculations, requiring merely a
modest personal computer and relatively low-cost software, are the standard for virtually every lighting
practitioner.
This section provides an overview of lighting design analysis tools, including calculation methods and
software programs. Section 4.4.2 describes design analysis tools for daylighting in more detail.
create highlights in
contrast to lower
ambient illumination
levels
create highlights
with efficient sources
as close to the object
as possible
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-24
Hand Calculations
The Lumen Method
The lumen method, also known as zonal cavity calculation, is a quick and simple technique for predicting
the average illuminance level in a room. The lumen methods major drawbacks are that it determines
neither the range of light intensity in a room nor where differences in light intensity levels occur, and it
cant provide information about lighting quality, visual performance or lighting patterns in the room. This
method is especially inaccurate for non-uniform lighting systems.
The lumen method still has its place, however. It permits reasonably effective comparisons of competing
general lighting systems, and it lends itself quite well to the lighting retrofit market. Because of the wealth
of product data, simplicity of the formula and the ease of incorporating it into spreadsheets, the lumen
method continues to play an important role in everyday lighting design. Lumen method calculations are
described in more detail below.
Lumen method calculations are typically templates for spreadsheet programs or short routines built into
handheld computers. Calculations have simple input requirements:
Physical characteristics of the room, including length, width and height
Ceiling, wall and floor reflectance (% of light reflected by the room surfaces)
Work plane height (that is, desk height or height above the floor at which the visual work is to be
performed)
Distance from the work plane to the luminaires
Coefficient of utilization (CU) for the luminaire: the percentage of initial lamp lumens that are delivered
to the work plane. This value depends on the luminaire design and the characteristics of the space
where the luminaire is located (see above bullets).
Number of lamps per luminaire and initial lumen output of each lamp
Light Loss Factors (LLFs): scalar multipliers that account for the degradation of rated initial lamp
lumens. Light loss factors may be either recoverable due to maintenance of the lighting system and
room, or non-recoverable and constant. Light loss factors include dirt accumulation on luminaires and
room surfaces, lamp depreciation, ballast factors and thermal application effects.
The lumen method can be used to calculate the average illuminance incident on the work plane once the
lighting system has been designed. Alternatively, the method may be used to calculate the number of
luminaires required to produce a desired light level. While the method is most commonly used with direct
lighting systems, it can also be used with indirect and direct-indirect lighting systems.
While the method easily lends itself to hand calculations, spreadsheets and personal handheld
computers, obtaining manufacturers' data is still required. The more powerful programs require complete
photometric data, but basic CU data is available on many product cut sheets, and generic data can
often be substituted with only a modest loss of accuracy. Some spreadsheets combine the lumen method
calculation with an economic analysis program, especially for evaluating lighting retrofits.
Basic Point-by-point Lighting Programs
These programs determine light levels at specific locations in a space. They can predict the brightness of
room surfaces and give the patterns of light on the ceiling, walls and floor. Some programs calculate
special figures of merit such as equivalent sphere illumination (ESI) and relative visual performance
(RVP), metrics of lighting quality and visual performance. Other programs can address glare issues
through calculation of uniform glare rating (UGR) and visual comfort probability (VCP). The sidebar,
Common Lighting Performance Terms, describes these concepts in more detail.
Graphically enhanced point calculations go beyond these capabilities by providing graphic
representations of the results. These may include color or gray-scale plots and isolux (isofootcandle) plots
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-25
for either interior or exterior lighting, and three-dimensional perspective renderings of an interior space
with its lighting system.
These programs are useful for interior electric lighting and daylighting, and can also be used for exterior
lighting calculations requiring consideration of reflected light such as from canopies or walls. All modern
programs run in Microsoft Windows and can obtain input space geometry from user input or from a .DXF
or .DWG file.
Virtually all modern programs designed for everyday use in lighting design employ radiosity, a modern
form of radiative-transfer calculations that have been used in point calculations since the 1970s. These
programs are more precise in their calculation abilities, and thus require more detailed input, including:
Room dimensions, work plane height, and luminaire mounting height (for pendant mounted
luminaires).
Room surface reflectance, including "inserts"portions of room surfaces that may have different
reflectance.
Detailed luminaire photometric data in IESNA format.
Precise location and orientation of luminaires using x, y, z coordinates, or using an interface with CAD
programs.
Light loss factors and any other multiplying factors to adjust the lamp and ballast output from the
assumptions used in the luminaire photometry.
Point calculation programs calculate the lighting effects caused by specific luminaires in specific rooms.
They cannot choose an appropriate lighting system given the designer's requirements. Most programs
can only analyze an empty rectangular space lighted with electric lights and will provide the following
output:
Illuminance (lux or footcandles) on a horizontal work plane at selected points in the room, as well as
summary statistics such as average, maximum, minimum, and standard deviation of illuminance
values.
Room surface luminance (candelas per unit surface area) or exitance (lumens per unit surface area).
These results are based on the assumption that room surfaces have a matte, not shiny, finish.
Lighting power density (W/m

or W/ft

).
Point calculation programs may also have some or all of the following capabilities:
Daylighting analysis. Calculated illuminance values and light patterns include daylight contributions
through windows and skylights as well as contributions from the electric lighting system.
Consideration of daylighting generally requires that outdoor illumination conditions be specified along
with details about the orientation and transmission characteristics of the building's fenestration.
Partition analysis. The effect on interior partitions or other light-blocking objects in the room is
considered.
Calculations and analysis taking into account furniture, partitions, and interior elements like columns
and pilasters. These and other objects in space increase the realistic quality of renderings, but can
add considerable computational time.
Visibility and visual comfort metrics. UGR (uniform glare rating), ESI (equivalent sphere illumination),
RVP (relative visual performance) and VCP (visual comfort probability) are the principal metrics
computed by these programs. They are calculated for a specific location in the room and for a specific
viewing direction.
Output from these programs is usually a chart of calculated values, an isolux (isofootcandle) plot, or a
shaded plan with gray scales representing a range of light levels. All programs print results, and some will
display the results directly on the screen. Most programs offer three-dimensional, black-and-white or
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-26
color-shaded perspective views of the room showing light patterns produced on the room surfaces by the
lighting system.
Modern point calculation software requires Pentium-class or greater computing power; exact
requirements vary with the capabilities and design of a specific program. The run time for point
calculations can range between several seconds to several hours, depending on the software and
hardware used. Calculation complexities, especially rooms of unusual shape, many internal objects, or
those with a large number of luminaires, increase calculation time dramatically. For instance, a simple box
room with four luminaires can be completely analyzed (including daylighting) on a Pentium II class
machine in about 30 seconds; adding a single desk in the middle of the room can double or triple
execution time.
Programs for general use will range in cost between $100 and $900, depending on features and
capabilities. Some manufacturers offer software for free or a nominal price (less than $100), but these
programs are generally limited to a stripped down version of the real program.
Advanced Lighting Programs
Advanced programs include both radiosity and ray-tracing programs. They are capable of extreme
accuracy in spaces of complex geometry. Most generate high quality, semi-photorealistic images
depicting interior and exterior lighting, including daylight.
Because ray tracing is significantly more computationally intensive than radiosity, ray-tracing programs
are much less common. Ray-tracing programs require considerably more computer time, data entry time,
and operator expertise. However, ray-tracing programs generally produce superior visual results, often
making them worth the time and expense for critical lighting designs and evaluations. Ray-tracing
programs are uniquely capable of demonstrating effects and issues caused by specular surfaces, and are
the only programs that render highlights such as reflections in polished surfaces or glass. Some programs
combine the computational speed of radiosity with the accuracy and realism of ray tracing, permitting a
practical program for common use.
Advanced radiosity programs have greater capabilities than basic programs, including:
Analysis of rooms of any shape
Rooms can have sloping and complex ceilings
Realistic objects in space
Faster execution time
Much more realistic renderings
Advanced ray-tracing programs are the most accurate means of computing lighting effects. By tracing
each "ray" of light, extremely complex visual scenes, including furniture, artwork and windows, can be
analyzed exactly. Difficulty notwithstanding, ray-tracing programs display lighted rooms in full color, with
accurate light patterns on room surfaces and partitions, and realistic shadows from realistic furniture. Fine
details, such as the specular reflection from a window or shiny metal, enhance the sense of realism to
levels unattainable with radiosity software alone. Some programs, such as Lightscape, use radiosity for
most calculations, then add a ray-tracing layer for realism of specular reflections and highlights.
Pentium III-class computers with advanced graphics cards are generally needed to obtain satisfactory
results with Windows-based programs. In general, the computer model is created in a 3-D visualization
program, an arduous task requiring input details for every object and material to be rendered. The lighting
program imports this data, lighting data is added, and the analysis performed. Depending on the
complexity of the design and the computer power available, program run time can be minutes or even
hours.
For people with access to a Unix-class graphics workstation, the public domain program Radiance is
perhaps the most powerful. Specialists with high-powered graphics workstations have used Radiance to
produce unprecedented real-time walkthroughs of spaces. However, the program was not originally
developed for commercial use, and the learning curve is very steep, requiring a very large investment in
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-27
time, computer power, and patience. A Microsoft Windows version of Radiance has recently been
introduced; there is no experience data yet.
Rendering add-ins to AutoCAD and 3D Visual Studio/3D Viz are also available. Rendering add-ins are a
relatively new phenomenon, as they take advantage of lighting algorithms to illustrate games and
architectural programs with considerable realism. However, because most of these programs are
illustrators tools and not necessarily professional lighting programs, it is probably a good idea to
determine the accuracy and features of the program with respect to lighting and daylighting.
Specialty Calculations
There are several lighting calculations that are best performed using a program specifically designed for
them. In particular:
Most exterior lighting calculations dont require calculations involving reflecting surfaces such as
ceilings and walls, so faster, simpler programs have been written for this task.
The unique nature of theatrical and performance lighting equipment is best served by an application-
specific user interface, although the calculations may be very similar otherwise.
Easy-to-use programs and templates have been developed as aids for common lighting problems,
including skylight design (see section 4.4.2) and display lighting design.
Exterior Lighting Calculations
Exterior lighting programs are used for parking lots, roadways, pedestrian paths, and special situations
such as airport aprons, car sales lots and sports fields. Exterior lighting calculations are very similar to
interior calculations, except that they are simpler, since no light reflectance from room surfaces are
calculated. Exterior programs generally allow the user to aim the luminaire (interior programs usually
assume the luminaire will be parallel to the floor). Input data typically include the following:
Plan dimensions of the site to be studied, usually entered in x, y coordinates or through a CAD
interface
Points on the site where illuminance is to be calculated. Some programs permit blocking out the
printing of light levels on areas of the site where light levels are not critical, or where buildings or trees
would block the light.
Luminaire photometry
Mounting heights, site locations, orientations, and tilt of luminaires
Lumen output of the specified lamp
Light loss factors due to lamp aging, ballast factor, and luminaire dirt accumulation
As with interior programs, photometric data files for exterior luminaires are generally supplied by
manufacturers on data disks in IESNA format. Or, if a data disk is not available, the candlepower data
may be keyed in by hand from the manufacturer's photometric report.
The most common form of exterior lighting analysis is the calculation of illuminance on horizontal and
vertical planes. Horizontal planes usually are used for roadways, pathways and parking lots, while vertical
planes are typically used for parking lots, sports fields and automobile display areas. Exterior lighting
programs are also very useful in calculating light trespass onto adjacent properties, the lighting of
adjacent building facades, and evaluating a lighting system for the use of exterior closed circuit television
cameras. Advanced tools including the calculation of veiling luminance are available when using some
programs.
Because the results of roadway and parking lot calculations lend themselves well to graphic presentation,
output from most of these programs is provided as a grid of illuminance levels, gray-scale tones, and/or
isolux (isofootcandle) plots. Most programs will limit analysis to areas of the site where illumination is
important, such as between the curb lines in roadway analysis. No analysis is performed (or at least not
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-28
printed) for areas of the site where light levels are not critical. Many programs can take into account the
shadowing from buildings. Most exterior lighting programs are designed to run on Windows-based
computers.
Many exterior lighting programs are designed to work with CAD programs. CAD interface capabilities
allow rapid data input and layout using a mouse or digitizer. This type of drawing and computing
relationship accelerates and improves the accuracy of site and roadway lighting design. Locations of
luminaires can be determined from CAD data, and output information such as isolux/isofootcandle plots
can be entered directly onto the base civil engineering or site plan. Enhanced screen and printer images
include three-dimensional representations, such as perspective-isolux drawings.
Exterior programs for general use cost $200 to $1500. Several outdoor luminaire manufacturers will
supply software to specifiers for a nominal fee ($0$100), but these programs may only analyze that
particular manufacturer's luminaires. For most commercially available lighting software, a reasonably
current office computer is generally all that is needed.
General Purpose Energy Simulation Programs
Energy simulation programs such as DOE-2, BLAST and EnergyPlus are not really lighting programs, but
they do simulate the energy used by lighting systems and are useful in evaluating the interactions
between lighting system improvements and HVAC systems. The programs enable one or more lighting
systems to be modeled in each space. The peak power is defined for each system and an operation
schedule is assigned. The operation schedule indicates the percent of the lights that are operating for
each hour of the year. Most of the programs can do basic daylighting calculations for a single lighting
reference point.
Application Guidelines
Approaches to Lighting Design
Lighting design strategy often determines the appropriate type of lighting calculation. Two design
approaches are discussed here: general lighting approaches and task-ambient lighting approaches.
General Lighting
The general lighting design approach is a common strategy used to provide a fairly uniform amount of
light throughout a room. If the task location in a room is likely to vary widely, or if the space is likely to be
frequently reconfigured to accommodate changes in work groups (such as adding staff and moving
workstations around a couple of times per year), then it may be advisable to design for task levels of
illuminance everywhere in the room.
The general lighting system is usually a regular pattern of luminaires that produces very even light levels,
slightly higher than the average value in the center of the room, and slightly lower in the outer corners of
the room. Lumen method calculations are appropriate for the design of general lighting systems.
Multicomponent Lighting Design
Task-ambient lighting and other multicomponent design approaches tend to be non-uniform, with lower
ambient light levels surrounding brighter task areas. For example, in a task-ambient design, luminaires
might be concentrated primarily over work areas, while an indirect lighting system provides relatively low
levels of general (ambient) illuminance. This design strategy usually requires point calculations to ensure
that luminaires are correctly located to produce the lighting level and quality necessary for performing
visual tasks at the needed locations.
The skilled application of computerized point lighting calculations can optimize lighting levels in both the
task and ambient domains in order to minimize energy consumption. The lighting professional should
consider the use of point lighting calculations, both to design more energy-efficient spaces, and to create
spaces with more drama and visual interest.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-29
Point calculations are an exceptionally accurate way to compare general lighting systems. While the
easier lumen method allows the comparison of average illuminance, point calculations permit the
comparison of uniformity of light on the work plane, the patterns of light produced on ceilings and walls,
and task contrast rendering. More specifically, point calculations allow consideration of the effects listed
below.
Effects on Room Surfaces. By evaluating the patterns of light on a wall caused by a row of compact
fluorescent downlights, an aesthetic evaluation can be made. Artwork locations may be selected or
lighting may be designed to highlight artwork. It may also be possible to determine whether the
pattern created on a wall will produce luminance extremes that will cause glare or reflections in VDT
screens.
Indirect Lighting Effects on Ceiling. When they are too close to the ceiling, indirect lighting systems
may create definite stripes or pools of light on the ceiling that are distracting and that may image in
VDT screens. Careful ceiling luminance calculations can help identify the problem, and allow
comparison of lighting products with various optical distributions and suspension lengths to reduce
the effect. Gray-scale printouts or shaded VDT screen output of luminance make visual assessments
possible.
Interior Task-Ambient Lighting. Point calculations should be used for any type of lighting design
where the task locations and types are well known and are unlikely to move without a lighting
redesign. They may also be used for lighting designs where tasks that move end up in predefined
locations.
Cautions for Point Calculations
In the case where a task light is used, or where an indirect luminaire is mounted within 12 in. of the
ceiling, point calculations aren't always appropriate. In general, if the luminaire is close to the surface
where lighting patterns are to be evaluated, a near-field situation exists. A shortcoming of the
mathematics used in point calculations is that these near-field calculations are comparatively inaccurate
unless near-field photometric data is available from the luminaire manufacturer, or the computer program
is capable of adjusting the luminaires' characteristics to improve the accuracy of the results. Otherwise, it
may be more accurate to evaluate the light patterns from the task light or indirect luminaire empirically.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-30
Common Lighting Performance Terms
Luminous Flux, measured in lumens, refers to the gross amount of light generated by a source, irrespective of the
intensity of the light in a given direction.
Candlepower is the measure of the intensity of a light source in a given direction, measured in candelas (cd).
Candlepower distribution curves describe the direction and intensity of light radiation by a luminaire or a light source.
Illuminance describes the amount of light falling on a surface. If the surface is horizontal, light striking it is known as
horizontal illuminance; if the surface is vertical, it is called vertical illuminance. The average illuminance on a surface
may be calculated by dividing the number of lumens falling on the surface by the area of the surface. Or, the
illuminance incident at a point may be calculated as the candlepower of the light ray from the light source to the point,
divided by the square of the linear distance between them, times the cosine of the angle between the light ray and the
normal to the surface. Both methods result in "footcandles" if the area or distance is measured in square feet, or in
"lux" if the area or distance is measured in square meters (1 footcandles =10.16 lx). Illuminance can be measured
with an inexpensive meter. This value is still used as a measure of lighting quantity and as a standards value.
Equivalent Sphere Illuminance (ESI) is a measure of how visible a specific target is under a proposed lighting
system, as compared to the same target illuminated by a uniformly bright hemisphere, expressed as the illuminance
created by the hemisphere. ESI can be a powerful design tool in evaluating performance of competing lighting
systems. In simple terms, ESI indicates how much illuminance on the task actually aids visibility, as opposed to
causing veiling glare. This metric is very difficult to measure in the field or calculate by hand; however, available
computer programs are able to compute it easily and can be an aid to understanding basic principles of lighting
quality.
Relative Visual Performance (RVP). Based on experimental measurements made at the National Research Council
of Canada, this is a metric describing the potential of performing a visual task accurately under a very specific set of
conditions. RVP is an important tool for comparing lighting systems. It is expressed as a percentage that predicts the
probability of successfully performing a task where speed and accuracy are important by measuring how well the
lighting system renders the target's contrast. User age, precise reflectance characteristics of the task, distribution of
the light approaching the task, viewing location, and orientation with respect to the task and lighting system must be
known to compute RVP at a point. This does not diminish its utility when comparing lighting systems. RVP for an
existing task, user, and lighting system may be determined using an instrument designed for this purpose. RVP is
considered an important tool for comparing lighting systems, but it has been slow to gain widespread acceptance,
because it is generally limited to those who comprehend how it is calculated and understand its limitations and
narrow application.
Visual Comfort Probability (VCP) is a calculation taking into account the relative brightness of a lighting system
from a given viewing angle, resulting in the likelihood (as a percent) that a lighting system will be visually comfortable.
VCP data were confirmed experimentally using uniform layouts of lensed fluorescent luminaires. While it is typical
practice to extrapolate the VCP concept to apply it to various size louvers and luminous ceilings, it should be noted
that VCP data have not been experimentally confirmed using these systems. As such, one should be cautious in
using VCP to evaluate the potential visual comfort of lighting systems using other than lensed luminaires.
Exitance, Luminance, and Brightness are properties describing how light is reflected from or transmitted through a
real (or imaginary) surface. Exitance is the total quantity of light emitted by, reflected from, and transmitted through a
surface into a complete hemisphere. It is expressed in units of lumens per unit surface area. Luminance is a very
important concept in lighting, since luminance is what we actually see. Rigorously, luminance is defined to be the
ratio of the intensity of light produced by a surface in a given direction to the projected area of the emitting surface. In
SI units, luminance is generally expressed as candelas/meter

. In English units, luminance should generally be

expressed in candelas/ft

. The foot-lambert unit for luminance that has been used in the past has been deprecated
and should be avoided. Brightness is used to describe the strength of the physical sensation caused by viewing
surfaces (or volumes). Brightness is related to luminance, but takes account of the fact that a surface with a
luminance of, for instance, 100 cd/m

will not appear twice as bright as a surface of 50 cd/m

.
Spacing to Mounting Height Ratios and Spacing Criterion (S/MH and SC) refer to the maximum recommended
spacing between luminaires to achieve uniform general lighting. S/MH is often expressed as "parallel" or
"perpendicular," and refers to the ratio of the center-to-center distance between luminaires to their mounting height
above the work plane in the direction either parallel or perpendicular to the length of the lamps. Current luminaire
photometry uses the term "spacing criterion" (SC) instead. While these metrics are useful for lumen method general
lighting calculations, neither S/MH nor SC is applicable in spaces with workstation partitions or where task-ambient
design is appropriate. Spacing criterion is described further in section 7.3.2.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-31
Resources
Each year, the Illuminating Engineering Society of North America (IESNA) publishes a lighting software
survey in Lighting Design + Application. Products are surveyed in many areas, including hardware
requirements, analysis features, applications, types of output, user features, and price. At the time of the
printing of the Advanced Lighting Guidelines, the IESNA survey was the most up to date and complete
source of information on lighting software on the market. The following are some of the more readily
available and recognized software available at the time of this documents development.
Table 4-3 Lighting Software Programs
Category Program Manufacturer Description
CALCU-LITE 5 The ScreenMaker
Williamstown, NJ
Basic lighting program
AGI Lighting Analysts, Inc.
Littleton, CO
Advanced radiosity lighting
program with rendering
LUMINAIRE GLOBAL
ILLUMINATION TOOLS
Jissai Graphics Radiosity add-in to 3D Viz with
rendering
LUMEN-MICRO 2000 Lighting Technologies, Inc.
Boulder, CO
Advanced radiosity lighting
program with rendering; also,
Simply Lighting basic lighting
programs
LITE-PRO Columbia Prescolite
Spokane, WA
Radiosity lighting program
with rendering
LUXICON Cooper Lighting
Peachtree City, GA
Radiosity lighting program
General Purpose Programs
and AutoCAD Extensions
VISUAL Lithonia Lighting Group
Conyers, GA
Advanced radiosity lighting
program
Radiosity and Ray Tracing
Program
LIGHTSCAPE 3.2 Autodesk
San Rafael, CA
Combines radiosity with ray
tracing for rendering accuracy
Ray-tracing Program RADIANCE (Unix) and
Desktop RADIANCE
(Windows AutoCAD 14)
Lawrence Berkeley National
Laboratory
University of California,
Berkeley, CA
Ray-tracing program that is
computationally intensive but
produces the most realistic
renderings
Note: These listings are not exhaustive and do not imply applicability or endorsement. Additional programs are available. Refer to
the annual lighting software survey in Lighting Design + Application magazine and http://www.lightsearch.com for additional sources
of software and comparative analyses.
4.4.2 Daylighting Design Analysis Tools
Unlike electric luminaires, daylight apertures are not routinely tested for their photometric performance.
The evaluation of an advanced daylight luminaire usually involves one or more of the following
specialized analysis tools.
Manual Calculations
Several methods have been developed for manual calculation of interior daylight levels. Most notable
among these are the lumen method of toplighting and sidelighting and the Lune Method (see IESNA
Lighting Handbook). Because of the dynamic nature and complexity of daylight and the plethora of
potential apertures, these techniques are quite time consuming and provide only a rough estimate of
performance. They have substantially been replaced by scale model and computer simulation techniques.
Scale Models
When constructed appropriately, a daylighting scale model provides accurate qualitative and quantitative
evaluations of daylight performance. Scale models (from 1/8 in. = 1 ft to over 2 in = 1 ft) furnish
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-32
information about shading patterns, direct sun penetration, daylight distribution and glare conditions.
Smaller models are used for site analysis; larger models, for evaluation of interior spaces. Models must
be light tight and constructed with appropriate dimensions and surface reflectance. Larger models may
use actual building components (glazing, surface treatments, etc.) to improve accuracy of the model.
Scale models are relatively easy and inexpensive to construct, but testing is time consuming and may
require access to an artificial sun and sky facility (known as a heliodon) for accurate studies of multiple
scenarios. These facilities are available at some university and utility laboratories. Model studies are
conducted for both direct sun and overcast sky conditions. Light level measurements are recorded with
small photosensors placed in the model or documented with photographs or videos.
If well built, the quantitative accuracy of scale models can be higher than most current computer
simulations. The Lighting Design Lab in Seattle, Washington, has developed a training video on the
construction and testing of models in an artificial sun and sky.
The ultimate model study is a full-scale mock-up of the space. Though expensive, these studies can give
the most accurate qualitative and quantitative information about the daylight and electric light and allow
the designers and clients to experience being in the space. They are usually only constructed for a small
representative portion of a larger extended building. Some utility-funded lighting facilities have large
spaces with movable ceilings and window walls which may be used to construct the interior of a full scale
space.

(a) scale model (b) Lightscape computer simulation (c) full-scale mock-up of classroom
Figure 4-2 North Clackamas High School Classroom Study Tools
Photographs of North Clackamas High School, Portland, Oregon, courtesy BOORA and LDL.
Computer Simulations
An increasing number of computer programs are available to simulate quantitative daylight levels and
qualitative renderings of architectural space. The programs vary in their ability to represent complex
architectural spaces (sloped and curved walls, for example) and handle specular reflections. The most
sophisticated programs take architectural information from the designers CAD file, add detail, and
generate rendered, textured, color images with specular reflections for a particular location, day and time.
They can include the effect of both the daylight and electric light in the space and can generate an
automated walkthrough of the space for a particular day and time.
The quantitative accuracy of these programs is inherently constrained by the current lack of photometric
data for glazing and fenestration products and the dynamic range to qualitatively represent glare
conditions. However, use of the daylighting analysis features of either radiosity or ray-tracing programs
can be extremely useful, if not perfectly accurate. Simulations for simple spaces that dont require a
refined rendering can be accomplished quickly (frequently faster than scale models) and with quite
reasonable accuracy. More refined simulations require technical expertise and extensive modeling time.
This time is abbreviated if the designer has already constructed an appropriate CAD file. Repetitive
parametric runs are easily accomplished.
Daylighting Control Simulation Tools
Some of the common daylight control simulation programs used in the United States are listed in Table
4-4. A more comprehensive list can be found in Daylighting Performance & Design (Ander 1997). None of
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-33
these tools includes the ability to evaluate savings due to lumen maintenance strategies, lengthening of
relamping schedules, and any productivity improvements that may result from the daylight and increased
flexibility of the controls. These will need to be calculated separately.
Table 4-4 Daylighting Control System Simulation Tools
Program Tool Description Cost and Availability
DOE-2 Hourly building energy simulation tool developed by LBNL.
Commercially available from a variety of suppliers
Models both windows and skylights. Evaluates impact on
HVAC and savings from lighting controls.
Cost: $400$1,400
Availability: For a list of commercial
versions, go to
http://gundog.lbl.gov/dirsoft/d2vendors.html
Energy 10 Hourly building energy simulation tool developed jointly by
NREL and PSIC. Limited to buildings less than 10,000 ft.
Models both windows and skylights. Evaluates impact on
HVAC and savings from lighting controls.

Cost: $250
Availability: Contact Passive Solar
Industries Council (PSIC) at (202) 628-
7400 X210 or online at
http://www.nrel.gov/buildings/energy10
Adeline Electric and daylight design tool linking a selection of
lighting (Superlite and Radiance) and energy software
tools with a CAD program to evaluate the HVAC and
lighting performance of windows and skylights.
Cost: $450
Availability: Order online at
http://radsite.lbl.gov/adeline or contact
LBNL Building Technologies Program
SkyCalc Microsoft Excel-based spreadsheet program (originally
derived from DOE-2 runs) that predicts lighting and energy
outcomes of a given skylighting system over a range of
skylight-to-floor ratios. Includes estimates of energy
impacts due to lighting, heating, cooling and controls.
Skylights only.
Free
Availability: Download free online at
http://www.energydesignresources.com or
http://www.h-m-g.com
4.4.3 Economic Analysis of Lighting Systems
Some advanced lighting systems increase construction costs. Designers need to know when these
additional costs can be justified through future energy savings or other benefits. As discussed in section
2.3, many of the benefits of efficient lighting systemssuch as productivity gainsare difficult to quantify.
Environmental impacts are also elusive and are often called externalities because they are external to
most analyses of economic performance.
The construction or initial costs of lighting systems are a key concern to all players. To be successful, an
advanced lighting system must also meet the economic criteria of the building owner. These criteria may
not appear immediately rational to the outside observer, as discussed in Economic Limitations below.
Comparison of alternative lighting systems should include all relevant costs associated with a lighting
system, and use an appropriate analysis tool, as discussed in Economic Decision-Making below. Lighting
retrofit projects should start with a screening of all possible projects for those that have the greatest
potential, a quick scoping study, and then if warranted, an investment grade audit should be performed,
as described below in Retrofit Assessment and Lighting Audits.
Economic Limitations
Energy efficiency advocates have long thought that if only they could prove the economic rationality of
efficiency improvements, then surely reasonable decision-makers would choose the more efficient
strategies. This has repeatedly proved a much more difficult sell than originally thought. Lighting systems
in commercial buildings have been greatly undervalued and often are of much poorer quality than could
be easily justified economically. Reasons for underinvestment in lighting systems include:
Last-minute changes to the lighting specifications that allow the substitution of inferior products.
Decision-making based on initial installation costs, rather than long-term operating costs.
A market culture that is driven by the sense that "what everyone else is doing" must be right.
A deep-seated belief that lighting doesn't really affect worker performance (see the sidebar There's
No Such Thing as the Hawthorne Effect in chapter 2.)
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-34
Substitutions
Lighting installations in commercial buildings often suffer by being the last major system to be installed in
a building, and are perhaps therefore the most susceptible to last-minute cuts to the construction budget.
Lighting designers complain that their designs are frequently changed without their review by a "value
engineering" process where contractors recommend that specified items be replaced with lower quality
products. Construction scheduling is also often used to "break the spec" by claiming that the specified
product is not readily available and that waiting for it will slow down construction. Building owners who
called for high quality lighting during the design process may discover after occupancy that they received
only mediocre lighting systems as a result of decisions made during construction.
Importance of Initial Costs
Like it or not, initial cost is the prime criterion for evaluating most construction decisions. Construction
budgets are extremely sensitive to a system's first cost, and are much less sensitive to a system's life-
cycle costs. Construction and renovation projects are seen as one-time expenses with pre-set budgets,
managed independently from other business expenses. Design teams are tasked with meeting the
budget as their primary objective. Furthermore, most private sector companies must borrow money for
building projects. With financing, the time value of money puts even more pressure to keep the
construction budget as low as possible. Businesses must prove to the bank that their building is worth the
investment. Prudent risk management generally suggests keeping that investment as low as possible,
putting even more pressure on keeping the construction budget as low as possible.
Government agencies have tried to change this "initial cost" culture by insisting that all public building
projects be evaluated using life-cycle cost criterion. Clear rules and procedures have been developed,
evaluations are dutifully performed and recommendations made. However, even in these situations, the
construction budget and schedule often become the final criterion in decision making. Recommendations
can be ignored, but budgets must be met. Thus there is enormous pressure to reduce the initial cost of
lighting systems. Any increase in cost must be convincingly justified; and even then, it's likely to be
ignored when the project team is confronted with the final budget.
Market Culture
It's also important to understand the "market culture" involved in lighting decisions. Both developers and
government agencies often want to be doing what everyone else is doing; they don't necessarily want
their buildings to be exceptional. Once a particular lighting system is accepted as "standard practice" or
as "modern," many people assume that it's "better" and use the system indiscriminately in every
application. A recent example of this mentality is the pervasive use of parabolic luminaires whether they
are needed for glare cutoff or not. This market culture is not economically rational, but it can be influenced
by leaders in the field who make thoughtful decisions.
The key to greater investment in lighting systems will ultimately depend on a widespread understanding
that quality lighting makes an important contribution to worker performance. Efforts are underway to
quantify these benefits, as discussed in section 2.3 Light and Productivity.
Economic Decision-Making
Most companies spend very little time assessing the economic value of lighting alternatives. The easiest
path is to do "the same thing we did last time." Some companies may do a quick payback check, which
may be no more than a "back of the envelope" calculation. However, without more careful financial
assessment, many of the advantages of advanced lighting systems will be ignored or undervalued.
There are a variety of methods to evaluate costs and benefits of lighting alternatives and put them into an
economic equation. These include:
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-35
Simple payback, which compares installation costs to the expected first-year savings from the new
system, usually just energy savings. It's expressed as the amount of time required to pay for the
incremental cost of the system with increased savings, in terms of months or years. Simple payback
always underestimates the value of energy and maintenance savings because it doesn't consider the
time value of money.
Life-cycle cost analysis (LCA), which considers all the costs over the life of a system, including
energy, maintenance, disposal, and the time value of money based on expected inflation rates or
standard interest rates. It's very useful when comparing systems with different life span and period
costs, like maintenance, that occur on different schedules. Different systems are compared by their
annualized cost of ownership.
Return on investment (ROI), which can consider as many or as few factors as the analyst wishes.
The final answer is expressed in terms of the value of the investment in the system, compared to the
value of any other investment.
Publications are available that thoroughly detail how to perform these economic analyses.
26
There is a
basic trade-off between simplicity and accuracy in choosing which method to use. Software tools have
made the more sophisticated economic analysis methods within reach of anyone with a computer. The
Federal Energy Management Program (FEMP) has developed a series of software tools to facilitate life-
cycle cost analysis of energy related projects.
27
Many private-sector lighting programs also include a
variety of financial analysis options.
The key to any economic analysis will always be the accuracy and completeness of the information
inputs. Simple analysis based on rough guesses or defaults provide "ballpark" estimates. This level of
analysis is usually appropriate at the initial states of a project. Sophisticated analysis considers more
detailed data from documented and updated sources. Such careful analysis is highly appropriate to any
major investment or policy-level decision.
All of the costs and benefits associated with a lighting project should be considered in a careful economic
evaluation of a lighting system. These include:
Installation costs
Financing costs
Design and management costs
Energy costs
Maintenance costs
Human factors
Environmental benefits (externalities)
These costs and benefits are described below.
Installation Costs
Installation costs, also called first costs or initial costs, are all the costs to purchase and install a fully
functioning system in a building. They properly include:
Equipment cost, including distributor's and contractor's mark-up, and shipping charges

26
See the lighting economic analysis information included in the IESNA Lighting Handbook, 9th Edition, EPRI's
Lighting Fundamentals Handbook, and various publications and software available from the Federal Energy
Management Program's Web site, http://www.eren.doe.gov/femp/ordermaterials.html.
27
For more information on federal economic analysis tools, go to
http://www.eren.doe.gov/femp/techassist/softwaretools/softwaretools.html.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-36
Labor to install equipment, including placement, wiring, cleaning and contractors' mark-up
Labor to commission and train building employees in proper operation of the system
Any discounts, rebates, or incentive payments
There are often trade-offs between equipment and labor. Reduction in wiring and installation costs can
often counterbalance more expensive equipment. For example, linear pendant luminaires can sometimes
reduce costs over recessed troffer alternatives by reducing the number and complexity of wiring
connections between luminaires.
Similarly, any project involving moving parts or adjustable settings needs to be commissioned on-site to
be sure that it is functioning as intended. Commissioning costs should be included in any budget
allowance. A construction budget should also include an allowance for the contractor to train building
employees in the proper maintenance and operation of systems.
Any discounts, rebates or incentive payments should also be factored into installation costs. Utility
companies have often tried to encourage the installation of more efficient systems by helping to "buy
down" the installation cost with incentive payments or rebates to the building owner. These programs
change, so check current program rules and availability with your local utility representative rather than
assuming that such incentives will be available for a given project.
Financing and Appraised Value
As discussed above, the cost of financing construction projects is considerable and becomes a motivator
to keep the project "on time and on budget." Any increase in initial cost or extension of the construction
finance period multiplies the final cost of a project. Depending on the specific terms, financing costs can
easily equal or exceed the installation costs of a project.
Whenever possible for private-sector projects, managers should try to take advantage of the reduced
operation costs and improvement in overall building value of a new lighting installation to help leverage
the financing limits for a project. Banks typically determine their financing allowance based on expected
income from tenants less all operating costs, times a capitalization rate. For example, with a 10%
capitalization rate, which is fairly typical in the construction industry, a $0.20/ft reduction in yearly energy
costs translates into an increased total building value of $2.00/ft, which would likely cover the additional
costs for a state-of-the-art lighting system.
Similarly, many people are looking for ways to help appraisers recognize the value of such energy
savings when they assess the value of a commercial building for resale. If appraisers assigned an
increase in value to a building with improved energy efficiency or enhanced lighting quality, it would
provide a major incentive for developers to invest in those features since it would add to the building's
permanent valuation. Essential to achieving this goal is an objective measure of building performance that
appraisers can easily reference and compare to an industry standard. Since appraisers only compare
projects within small geographic areas, typically on the scale of a city or even neighborhoods, this
information must be available at a similar geographic level. One effort in this direction is the Energy Star
Building program initiated by the U.S. Environmental Protection Agency (EPA).
28
Another is an ongoing
project in California to develop a statewide database of building characteristics that might be used to
establish industry norms by building type and age. Developed by investor-owned California utilities, this
database currently resides at the California Energy Commission.
Many large institutions and governments have a difficult time financing lighting renovations, even when
the financial analysis clearly shows that it would be a wise investment. To help these organizations, a
new industry has evolved that essentially finances projects by taking a share of the energy savings. This
approach is often referred to as "energy cost sharing," and companies that provide this service as "energy
savings companies" (ESCOs). The federal government has created a new form of contracting called

28
For more information, go to http://www.energystar.gov.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-37
"energy services performance contracting" (ESPC) to enable federal agencies to take advantage of this
financing mode.
29

Design and Management Costs
Many analysts forget to include the cost of design services and time spent managing a project in their
calculations of cost effectiveness. People often make subconscious choices here, deciding to go with a
"quick and dirty" approach that can get a job done quickly, but may not optimize its quality and cost
effectiveness.
Professional design services do add to a project's real cost, as does the time to manage those design
services. However, an experienced and qualified practitioner knows how to optimize a lighting system for
the owner's needs and can greatly improve the economic value of a project. National Council on the
Qualifications of the Lighting Professions (NCQLP) requires that practitioners who have earned the
designation LC (Lighting Certified) have knowledge of economic analysis and can perform this function
for their clients (see section 3.3.4).
Lighting design practitioners who are asked to perform careful economic analyses or create alternative
scenarios for comparison will expect to be paid for additional services. A number of utility programs
recognize this increased cost and help to reimburse the designers for these services.
30

Managing a lighting project also involves time on the building owner's end. Building owners generally
prefer making quick, well-informed decisions rather than spending a great deal of time considering
alternatives and approving design changes. Thus, simple proven design strategies have a decided
economic advantage. Participating in special programs, such as government certification programs or
utility incentive programs, can also involve considerable administrative time, especially if eligibility must
be certified with much paperwork or with on-site audits. Program designers must be sensitive to this
issue, or they will find the "transaction costs" will discourage participants from joining the program.
Energy Costs
A full assessment of energy costs should include:
Per-unit energy charges
Demand charges
Fixed charges
Escalation rates
Discounts and other benefits
These factors are discussed below.
Per-unit Energy Charges. Calculating energy costs used to be relatively straightforward once you knew
total wattage and hours of operation of a lighting system. Most lighting energy analysis assumed an
average cost per kilowatt hour
31
and used the simple equation:
Energy cost per year = Connected load in kilowatts x Hours of operation per year x $/kWh
Equation 4-1
Per-unit energy charges become more complex when they vary by time of use. For example, some
utilities charge more for electricity used during the day than at night. The average cost per kilowatt hour

29
For more information on financing options for federal projects, go to http://www.eren.doe.gov/femp/financealt.html.
30
For example, in California, the statewide Savings by Design program offers payment to design teams, as does the
Design 2000 program from National Grid serving areas of New England.
31
Energy User News publishes average costs of electricity by sector and utility.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-38
can still be calculated based on total energy bills for one year divided by total energy use for the same
period. However, a better understanding of the cost savings due to an energy efficiency measure will
involve knowing the time of use for different systems and the load profile for the building. (See discussion
of lighting load profiles in section 3.1.4.)
Demand Charges. A more sophisticated analysis also looks at peak demand and associated demand
charges. In some regions of the country, peak demand charges can become more costly than overall per
unit energy charges. By reducing connected load with lower power densities, or peak demand with
controls that reduce use during peak periods, building owners might save more money than the value of
the straight energy savings.
Considering demand impacts makes the equation much more complex, because now you must know
when particular watts are used, by season or time of day, and even how lighting loads relate to other
loads in the building. Does peak lighting use coincide with peak periods defined by the utility? And do
those lighting peak loads also coincide with other peak loads in the building? Such an analysis requires
not only more information, but also a program that can simulate building energy use hour by hour.
Demand savings are also rarely certain, and difficult to attribute to one building system over another.
Some utilities shift demand periods by weather conditions, and most buildings have different peak
demands as weather changes. Some lighting strategies, like using photocontrols in conjunction with
daylighting, offer considerable opportunities to reduce peak lighting demand. However, this isn't a
certainty, since in any given year a utility peak load might occur during a day or time period that was not
optimum for daylighting. If the building owner can't be guaranteed that demand savings are absolutely
predictable, he or she may not be willing to include demand savings in a comparison between systems.
(See discussion of demand management in section 8.1.5.)
Fixed Charges. Energy pricing structures seem to be headed in the same direction as telephone bills:
numerous types of fees and charges, such as breaking energy charges down into connection charges,
fixed monthly charges, variable time-of-day rates, and peak use surcharges. Telephone companies have
learned to compete based on minimizing the advertised cost of a call per minute, while making their profit
on other fees and charges. Similarly, when utility companies shift more of the cost of providing electricity
to fixed charges per customer, the incremental value of energy savings to the customer is generally
diminished.
Escalation Rates. If energy prices are expected to rise in the future, the value of current energy savings
also increases. Of course, no one really knows what's going to happen in the future, so any guess might
be as good as another, unless one is trying to compare cost-benefit analyses of projects generated under
different assumptions. To simplify and standardize life-cycle cost analysis, the Energy Information
Administration
32
studies energy availability and cost escalation rates and publishes an official prediction
for energy escalation rates by fuels type and region. With deregulation, these predictions have become
less certain.
Discounts and Other Benefits. Deregulation promises building owners even more options in fee
structures. One utility might offer free phone service based on your energy bills. Another utility might offer
an initial discount on energy rates for the first year if you sign on with them for multiple facility locations or
across state lines. How will building owners compare lighting alternatives with this proliferation of pricing
structures? If deregulation also allows the price of energy to float with the open market, much as variable
rate home mortgages do, the time value of energy savings will become even more unpredictable.
Given this growing complexity, building managers will need to carefully analyze their billing structure in
order to understand the relationship between energy use and energy cost. Complexity and
unpredictability work against easy analysis of energy costs.
Maintenance Costs
The cost of maintaining a lighting system include:

32
See http://www.eia.doe.gov.
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-39
Routine maintenance, such as cleaning luminaires, troubleshooting systems, and spot replacement of
early failures, including both labor and equipment costs
Scheduled group replacement, including both labor and equipment costs
Stocking costs to warehouse parts, or order as needed
Disposal costs for lamps and ballasts
Labor costs of lighting systems are not trivial and should be included in any comparison between system
options. Because maintenance costs are periodic, and both labor and equipment costs are likely to
escalate over time, a life-cycle cost analysis is the most sensitive approach to evaluating the impacts of
maintenance costs. Generally, lighting maintenance costs will be reduced by: reducing the number of
luminaires and variety of components per facility; extending the system's life; improving the system's
reliability; increasing the accessibility and simplicity of the system; improving the cleanliness or
airtightness of a system so that there's less dirt accumulation; and making the system more
environmentally benign so that disposal and liability costs are reduced. Chapter 7 provides information
about lighting system maintenance issues.
Productivity Benefits
The ideal economic analysis would include human factors in the costs and benefits of different lighting
systems. This is, of course, very difficult to do as it usually involves comparing apples to oranges. For
example, a recent study showed that increased daylighting in elementary schools improved student
learning rates by 20% on standardized math tests and 26% on reading (Heschong Mahone Group 1999).
While this is clearly important to the central mission of a school district, how much is it worth in terms of
an investment in a daylighting system?
It's clear that the cost of providing and operating lighting systems is minuscule compared to the cost of
employees. A careful study looking only at the federal government's office workforce concluded that the
yearly cost of labor, in 1995 dollars, is about $164/ft of building area (Harris et al. 1998). This is a
function of both the cost of labor and the density of the workers in the building. Many higher paid and
higher density corporate offices have been estimated at $300 to $400/ft. Compare this to the cost of a
new efficient lighting system, at a one-time installation cost of perhaps $2.50/ft, and the value of energy
to operate it, at perhaps $.20/ft per year.
0
100
200
300
400
A
n
n
u
a
l
C
o
s
t
(
$
/
f
t
)
2
164
350
2.50
0.20
L
a
b
o
r
(
m
e
d
i
u
m
d
e
n
s
i
t
y
o
f
f
i
c
e
)
L
a
b
o
r
(
h
i
g
h
d
e
n
s
i
t
y
o
f
f
i
c
e
)
I
n
s
t
a
l
l
a
t
i
o
n
o
f
e
f
f
i
c
i
e
n
t
l
i
g
h
t
i
n
g
s
y
s
t
e
m
O
p
e
r
a
t
i
n
g
e
n
e
r
g
y
f
o
r
l
i
g
h
t
i
n
g

Figure 4-3 Building Costs Relative to Business Operating Costs
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-40
In the case of the federal office workers, consider a higher quality lighting system, which resulted in a
50% increase in lighting installation cost, from $2.50/ft to $3.75/ft. If this system also resulted in a mere
a 1% increase in productivity, the additional cost would be paid for in nine months, without accounting for
any other savings from energy or maintenance. For the corporate case, this payback is reduced to four or
five months.
Clearly, productivity impacts are vastly more important than energy savings. A 1% increase in office
worker productivity is equivalent to an additional 5 minutes of productive work per day, clearly within the
range of plausibility. Actual studies have shown significantly higher productivity impacts than 1%.
Researchers at Natural Resources Canada (Veitch and Newsham 1998) found that lighting conditions
could be shown to affect clerical workers' performance on various tasks. Overall, these effects ranged
from 1% to 25% for various task types.
This argument, however, has two sides. If a lighting system causes any loss in productivity, the impacts
are just a great, but in the opposite direction. This is an excellent argument for investing in professional
design services to ensure that lighting installations truly optimize conditions for workers.
Environmental Impacts
Environmental impacts that are not charged directly to a building owner are also very difficult to include in
an economic analysis. While most business owners may have good intentions to help the environment,
these intentions are likely to be dropped unless they can be included in the bottom-line equation.
Environmental labeling programs attempt to make environmental benefits more tangible by providing a
business owner with a third-party evaluation that they have achieved a real reduction in environmental
impacts. Labeling programs also offer an opportunity for marketing and advertising benefits that may
improve the bottom line. The U.S. EPA's Energy Star Buildings program, the U.S. Green Building
Council's LEED labeling system, and various other "green" or "sustainable" building rating programs are
all efforts to increase the value of environmentally sensitive buildings. An alternative approach adopted by
some government agencies is a policy allowing a blanket "environmental multiplier," on the order of 10%,
to the annual value of any energy savings to account for various externalities like a reduction in acid rain
or smog generation due to power plants. (See section 3.2 for more information about the environmental
impacts of lighting.)
Retrofit Assessment and Lighting Audits
Retrofit projects typically involve a different type of analysis than new construction projects because they
compare existing conditions and costs with proposed retrofit design options. This analysis usually
includes a lighting audit, an assessment of what is already in place and what the current ownership costs
are. The following discusses economic analysis of retrofit opportunities; see section 7.9 for information
about design criteria for lighting retrofits.
Lighting audits can be expensive, so to reduce initial costs it's wise to take a stepped approach to
assessing the economic viability of any retrofit project. The first step, screening, offers the lowest cost and
quickest assessment of a range of potential projects and allows a facility manager to prioritize which
projects should be addressed first. Those that are most likely to be economically attractive, or pressing for
other reasons, would then be investigated a little more deeply in a scoping study. A scoping study permits
the project to obtain financial commitments from the owner or lenders before incurring the larger cost of
an investment grade audit. These three assessment types are described below.
Screening
The first step in identifying a retrofit project is to screen all potential projects for their potential value.
Questions to ask include: Are the energy savings likely to be substantial? Will lighting quality
improvements make a difference to worker performance? Are there other benefits, in terms of
maintenance costs, environmental benefits or aesthetics that may justify the cost of a retrofit?
Screening multiple projects is typically done with very rough default assumptions about the equipment
and operation of lighting systems in a building. Quick "guess-timates" based on the age of the lighting
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-41
system and type of building are often sufficient at this stage to rank potential projects. There are a few
simple criteria to consider at this stage:
Older lighting systems are likely to have more energy and maintenance savings potential from
efficiency improvements
Longer hours of operation will increase the value of any energy savings
Higher energy costs will increase the value of any energy savings
Vision-critical tasks will increase the value of lighting quality improvements. Highly paid workforces
and high value products both increase the monetary significance of performance benefits from
improved lighting.
Simultaneous remodeling projects will offer opportunities for shared costs and integrated design
solutions that will expand retrofit options. Historic renovations or interior remodeling both present
important opportunities for lighting improvements.
Missed lighting control opportunities often present very cost-effective retrofits, as substantial cost
savings can be achieved without major alterations. Adding photocontrols to a building that already
has significant daylight, or adding time or motion controls to lights that are left burning all night are
easy retrofits with enormous savings potential. (Controls are discussed in chapter 8.)
Scoping Studies
A scoping study or walkthrough involves a rapid survey by an experienced auditor, followed by an
economic analysis of the approximate energy conservation measures. To save time and money, an
auditor performing a scoping study will usually only observe a sample of typical spaces within a building,
to get a sense of the general type and condition of the lighting equipment and the major opportunities for
a retrofit project.
A scoping study reduces financial risks by estimating the financial viability of a project before an owner
makes a commitment to the more significant cost of a full audit. If the proposed project doesnt occur, only
the smaller costs are lost. A scoping study can also sometimes be sufficient to define the scope of an
energy services performance contracting (ESPC) project, or can be appropriate to identify the simplest
component retrofits in highly uniform buildings. A scoping study might cost on the order of $.01/ft or less.
Investment Grade Audits
An investment grade audit is a thorough survey and engineering study supported by complete
documentation. A detailed audit and evaluation might cost two or three times as much as a scoping study.
The intent of the investment grade audit is threefold:
Provide sufficient information about existing lighting equipment, energy use, and lighting quality to
document the "before" condition.
Analyze the economic potential and other benefits of proposed retrofits to optimize retrofit choices
and to justify financial investment.
Provide sufficient information to define the scope of work for the retrofit contract. An investment grade
audit that analyzes more than one alternative can provide the owner with a choice of project levels to
pursue.
Information collected in an investment grade audit should include:
Detailed utility rate data and history, including time of use charges, demand, etc.
Room-by-room, luminaire-by-luminaire equipment counts for the entire building including light level
readings.
Use of lighting loggers to determine actual operating hours and control system function.
Analysis provided in an audit report should:
ADVANCED LIGHTING GUIDELINES 2001 EDITION 4. LIGHTING DESIGN CONSIDERATIONS
4-42
List all energy conservation opportunities, and propose one or more appropriate retrofit measures for
each.
Evaluate the energy and cost savings of each retrofit measure, using detailed cost information and
taking all nuances of utility rate structure into account.
Discuss the lighting quality, human performance, aesthetic and maintenance improvements that may
be realized.
Estimate construction budgets and life-cycle costs for alternative approaches.