Scribd Logo
Upload

Welcome to Scribd!

  • 313 views

    Check For Crack Width:-: As Per IS 3370 - 2009 (Part 2), ANNEX - A, Page - 6

    Uploaded by

    mvap2856
    This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Check For Crack Width:-: As Per IS 3370 - 2009 (Part 2), ANNEX - A, Page - 6

    Uploaded by

    mvap2856
    313 views2 pages
    This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

    Original Description:

    spreadsheet

    Original Title

    Crack Width

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    313 views2 pages

    Check For Crack Width:-: As Per IS 3370 - 2009 (Part 2), ANNEX - A, Page - 6

    Uploaded by

    mvap2856
    This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    4.1.

    4 Check For Crack width :-


    As per IS 3370 - 2009 (Part 2) , ANNEX - A , Page - 6
    Area of reinforcement " As " =
    #REF!
    b =
    1000
    h =
    #REF!
    d =
    #REF!
    Minimum cover to tension reinforcement " CO " =
    40
    Maxmum bar spacing " S " =
    150
    Bar dia " DIA " =
    16
    " a
    cr
    " =(((S/2)^2+(CO+DIA/2)^2)^(1/2)-DIA/2) as default
    or enter other value = 81.0
    "acr " is distance from the point considered to the surface of the nearest longitudinal bar
    Applied service moment " Ms "=
    #REF!
    Restricted Crack Width 0.2
    moduli of elasticity of concrete " Ec" = (1/2)*(20+0.2*fcu) =
    10.0
    moduli of elasticity of steel " Es " =
    200.0
    Modular ratio " a " = (Es/Ec) =
    20.00
    " r " = As/bd =
    #REF!
    depth to neutral axis, "x" = (-a.r +((a.r)
    2
    + 2.a.r)
    0.5
    .d =
    #REF!
    " Z " = d-(x/3) =
    #REF!
    Reinforcement stress " fs " = Ms/(As*Z) =
    #REF!
    Concrete stress " fc " = (fs*As)/(0.5*b*x) =
    #REF!
    Strain at soffit of concrete beam/slab " e1 " = (fs/Es)*(h-x)/(d-x) =
    #REF!
    Strain due to stiffening effect of concrete between cracks " e2 "
    e
    2
    = b.(h-x)
    2
    /(3.Es.As.(d-x)) for crack widths of 0.2 mm USED
    e
    2
    = 1.5.b.(h-x)
    2
    /(3.Es.As.(d-x)) for crack widths of 0.1 mm N/A
    e
    2
    = #REF!
    Average strain for calculation of crack width " e
    m
    "= e
    1
    -e
    2
    = #REF!
    Calculated crack width, " w " = 3.a
    cr
    .em/(1+2.(a
    cr
    -c)/(h-x))
    CALCULATED CRACK WIDTH, 'w' = #REF!
    #REF!
    mm
    2
    mm
    mm
    mm
    mm
    mm
    mm
    mm
    KNm
    mm
    KN/mm
    2
    KN/mm
    2
    mm
    mm
    N/mm
    2
    N/mm
    2
    mm

    You might also like