0% found this document useful (0 votes)
325 views1 page

650 NM 5mW RED Laser Module

This document provides specifications for a 5mW red laser module, including an operating voltage of 3.5-4.5V DC, a operating current of less than 25mA, a wavelength of 645-655nm, an optical power of less than 5mW, and a beam diameter of 0.75mm +/- 0.05mm. It is a focusable laser module with a built-in APC driver and an adjustable acrylic lens, housed in a chrome-plated brass heatsink case. The document warns that the laser diode housing is not isolated and the case is the anode, and that this is an OEM module requiring safe use and incorporation into a suitable housing due to optical hazards

Uploaded by

amir_okicic7001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
325 views1 page

650 NM 5mW RED Laser Module

This document provides specifications for a 5mW red laser module, including an operating voltage of 3.5-4.5V DC, a operating current of less than 25mA, a wavelength of 645-655nm, an optical power of less than 5mW, and a beam diameter of 0.75mm +/- 0.05mm. It is a focusable laser module with a built-in APC driver and an adjustable acrylic lens, housed in a chrome-plated brass heatsink case. The document warns that the laser diode housing is not isolated and the case is the anode, and that this is an OEM module requiring safe use and incorporation into a suitable housing due to optical hazards

Uploaded by

amir_okicic7001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HLM1230 5mW RED LASER MODULE

For further information or advice please contact [email protected]


< 5mW 650nm FOCUSABLE LASER MODULE
SPECIFICATIONS
INPUT VOLTAGE 3.5 - 4.5 v dc
OPERATING
CURRENT
< 25 mA
WAVELENGTH
645-655
nm
OPTICAL POWER < 5 mW
TTL BLANKING NO kHz
BEAM DIAM. 0.75 +/- 0.05 mm
DIVERGENCE
>0.5
mRad
WARM UP TIME <1.0 sec
Operating
Temperature
-10 - +50 deg C
POLARITY RED +ve BLACK -ve
Please note :
The laser diode housing is not isolated.
CASE IS ANODE
WARNING
This is an OEM module.The owner is responsible for safe use
and for incorporating it into a suitable housing.
OPTICAL HAZARD FROM LASER RADIATION
DO NOT LOOK DIRECTLY INTO THE BEAM.
650 nm
5mW
RED
LASER MODULE
FOCUSABLE
ACRYLIC LENS
FEATURES
BUILT IN APC DRIVER
LENS ADJUSTABLE BY HAND
NO TOOLS NEEDED
CHROME PLATED BRASS HEATSINK CASE
LEAD LENGTH 120mm
2010 HOWARD BATCHEN

You might also like