Scribd
Upload
235 views

Normal Design: Depressurize From Design Pressure To 50% in 15 Minutes

This document summarizes the calculation of vent stack dimensions according to API521 standards. The calculations determine that the required vent stack area is 0.06 square meters, equivalent to a diameter of 0.27 meters or 11 inches. The flow rate through the vent stack is calculated to be 200 cubic meters per hour. The recommended vent stack height is at least 3 meters higher than the tallest equipment or building, according to API521 standards.

Uploaded by

matteo2009
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
235 views

Normal Design: Depressurize From Design Pressure To 50% in 15 Minutes

This document summarizes the calculation of vent stack dimensions according to API521 standards. The calculations determine that the required vent stack area is 0.06 square meters, equivalent to a diameter of 0.27 meters or 11 inches. The flow rate through the vent stack is calculated to be 200 cubic meters per hour. The recommended vent stack height is at least 3 meters higher than the tallest equipment or building, according to API521 standards.

Uploaded by

matteo2009
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Calcolo dimensionale vent stack

p= API521 PAG.136
A
T
=
Vent stack area (m
2
)
C= Velocity (m/s)
150
m= Flowrate (Kg/hr) 25000.00
p
2
= Outlet pressure (KPa) 101.00
Z= compressibility factor 1.00
T= Outlet temperature (K) 310.00
K= 1.30
M= Molecular weight 20.00
RESULTS:
C= 409.39
A
T
= 0.06 diametro (m)= 0.27 11 "
p= 0.79
Ma
2
= 0.4190077
V= Volume to be depressurized (m
3
) 50.00
T= Time for depressurizing (m) 15.00 (1)
F= Flow rate (m
3
/hr) 200
(1)Normal design: depressurize from design pressure to 50% in 15 minutes
Ma
2
= 0.50
d= 0.251
Height: According to API521 (3mt higher than max top equipment or building)
Opzioni di calcolo
per GEA/ENEL
Mach Number
Vent Tip Diameter (m)
Density (kg/m3)
Cp/cv
m/s
(m
2
)
kg/m3
Mach number

You might also like