Scribd
Upload
37 views1 page

Cupola: NASA/Boeing, ESA/Alcatel Alenia Space

The Cupola is a small module on the International Space Station designed for observation of operations outside the ISS. It has six side windows and one top window to provide views of Earth, space, and activities like robotics and EVAs. The Cupola houses computer workstations to control the ISS and its robotic arms, and can fit two crew members. It is attached to a Node using the Common Berthing Mechanism.

Uploaded by

सविन कुमार कार्की
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views1 page

Cupola: NASA/Boeing, ESA/Alcatel Alenia Space

The Cupola is a small module on the International Space Station designed for observation of operations outside the ISS. It has six side windows and one top window to provide views of Earth, space, and activities like robotics and EVAs. The Cupola houses computer workstations to control the ISS and its robotic arms, and can fit two crew members. It is attached to a Node using the Common Berthing Mechanism.

Uploaded by

सविन कुमार कार्की
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INTERNATIONAL SPACE STATION GUIDE

ISS ELEMENTS
21 THE US LAB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
www.nasa.gov INTERNATIONAL SPACE STATION (ISS) INTERACTIVE REFERENCE GUIDE
National Aeronautics and Space Administration
Cupola
NASA/Boeing, ESA/Alcatel Alenia Space
The Cupola (named after the raised observation deck on a railroad caboose) is a small
module designed for the observation of operations outside the ISS such as robotic activi-
ties, the approach of vehicles, and extravehicular activity (EVA). It will also provide
spectacular views of Earth and celestial objects. The Cupola has six side windows and a
top window, all of which are equipped with shutters to protect them from contamination
and collisions with orbital debris or micrometeorites. The Cupola is designed to house
computer workstations that control the ISS and the remote
manipulators. It can accommodate two crewmembers
simultaneously and is berthed to a Node using the
Common Berthing Mechanism (CBM).
The Cupola in development. Command and control workstation
based on portable computer system.
Forged/Machined
Aluminum Dome
Window Assembly (1 top and
6 side windows with fused silica
and borosilicate glass panes,
window heaters, and thermistors)
Payload Data Grapple
Fixture (PDGF)
View looking into the Cupola from the Node as an entering
astronaut would see it.
Top view of the Cupola berthed to Node 3.
Length 3 m (9.8 ft)
Height 1.5 m (4.7 ft)
Diameter 3 m (9.8 ft)
Mass 1,880 kg (4,136 lb)
Capacity 2 crewmembers with
portable workstation

You might also like