Scribd
Upload
258 views

Ready - Configuring and Testing Your Network

Uploaded by

api-265330567
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
258 views

Ready - Configuring and Testing Your Network

Uploaded by

api-265330567
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 20

Configuring and

Testing Your Network


Network Fundamentals
Objectives
Define the role of the Internetwork Operating
System (IOS).
Use Cisco CLI commands to perform basic
router and switch configuration and
verification.
Given a network addressing scheme, select,
apply, and verify appropriate addressing
parameters to a host.
Use common utilities to verify network
connectivity between hosts.
Use common utilities to establish a relative
performance baseline for the network.

Role of Internetwork Operating System (IOS)
Identify several classes of devices that have IOS
embedded


Role of Internetwork Operating System (IOS)
Identify the relationship between IOS and
config


Role of Internetwork Operating System (IOS)
Recognize that Cisco IOS is modal and describe
the implications of modes

Role of Internetwork Operating System (IOS)
Define the different modes and identify the
mode prompts in the CLI

Role of Internetwork Operating System (IOS)
Identify the basic command structure for IOS
commands


Role of Internetwork Operating System (IOS)
Identify the types of help and feedback
available while using IOS and use these features
to get help, take shortcuts and ascertain success

Role of Internetwork Operating System (IOS)
Identify the purpose of the show command and
several of its variations




Use Cisco CLI Commands to Perform Basic Router & Switch
Configuration and Verification
Describe two common approaches to
establishing naming conventions

Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Describe several ways in which access to a
device configuration can be limited

Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Use the CLI to set passwords and add banners
to a device
Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Trace the steps used to examine the startup
config, make changes to config, and replace the
startup config with the running config

Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Use basic IOS config commands to manage a
device.

Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Configure an Interface of a router in a network.

Use Cisco CLI Commands to Perform Basic Router &
Switch Configuration and Verification
Describe the purpose of having multiple
interfaces in one router

Use Common Utilities to Establish a Relative
Performance Baseline for the Network
Use the output of the ping command, saved into
logs, and repeated over time, to establish
relative network performance




Summary

You might also like