Scribd
Upload
65 views1 page

Abstract Eng

This document summarizes an experiment analyzing the endurance fatigue of medium carbon steel AISI 1045 that underwent full annealing heat treatment using a rotary bending testing machine. Specimens were tested at varying loads from 20-60% of the steel's ultimate tensile strength. The maximum fatigue strength was achieved with a 20% load, completing 1.112.645 cycles before failure. Ductile to brittle transition symptoms appeared between 40-50% of the ultimate tensile strength load. The experiment aimed to determine the fatigue strength of heat treated AISI 1045 steel.

Uploaded by

jaya sukmana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views1 page

Abstract Eng

This document summarizes an experiment analyzing the endurance fatigue of medium carbon steel AISI 1045 that underwent full annealing heat treatment using a rotary bending testing machine. Specimens were tested at varying loads from 20-60% of the steel's ultimate tensile strength. The maximum fatigue strength was achieved with a 20% load, completing 1.112.645 cycles before failure. Ductile to brittle transition symptoms appeared between 40-50% of the ultimate tensile strength load. The experiment aimed to determine the fatigue strength of heat treated AISI 1045 steel.

Uploaded by

jaya sukmana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ABSTRACT

ENDURANCE FATIGUE TEST ANALYSIS OF MEDIUM


CARBON STEEL AISI 1045 WITH FULL ANNEALING
HEAT TREATMENT USING ROTARY BENDING
TESTING MACHINE

By
JAYA SUKMANA

Steel is a material that is widely used in the industrial world. One of the widely
used type of steel is AISI 1045 steel as the material of the shaft for the engine
components maker. On its use, the axis of operation receive dynamic load in a
long time, so that the vulnerable experienced a failure when used due to
experiencing fatigue failure. A weary resilience steel affected by mechanical
properties and microstructure of the steel. Heat treatment is one way that can be
done to change the mechanical properties and microstructure of steel and one of a
kind of heat treatment that can be given on the steel AISI 1045 is full annealing
method which can improve the steel ductility. To find out the fatigue strength
value of AISI 1045 steel that has been granted full annealing heat treatment, can
be done by performing testing using the rotary bending testing machine. As for
the testing method is done by giving the variation of load by 20%, 30%, 40%,
50% and 60% of the ultimate tensile strength value, as well as do macroscopic
observations by taking action against the pattern of the fracture that occurs in the
test specimens. The test results show that the value of the maximum fatigue
strength is able to accomplish is 1.112.645 cycle on the 20% loading,
accompanied by the presence of symptoms of ductile to brittle transition between
40% and 50% load from ultimate tensile strength value.
Keywords: Fatigue Test, Rotary Bending, Medium Carbon Steel AISI 1045.

You might also like