0% found this document useful (0 votes)
188 views2 pages

Planning For Slab Projects

Uploaded by

api-245783480
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
188 views2 pages

Planning For Slab Projects

Uploaded by

api-245783480
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

NAME___________________________ PER________

PLANNING SHEET (35 pts)


WORKING WITH SLABS OF CLAY (200 pts)
You will be making TWO projects to demonstrate skill in working with slabs of clay:
1. TRIVET (horizontal)
a small plate placed under a hot serving dish to protect a table.


2. VESSEL (vertical)
a hollow container, especially one used to hold liquid, such as a bowl or cask.


Use this planning sheet to come up with a design plan/concept that links the two pieces together.
Like a set.
1. Start with an idea (for example: FALL) Your idea: ______________________________________ (5 pts)
2. Then select a few colors (3 pts):

a._______________________________ , b. _______________________,c.___________________________

3. Next brainstorm some textures and shapes (3 pts):

a.
b.
c.

4. Next decide on the overall shape of your trivet and the cutouts. Describe below (2 pts):



5. Think about and select the purpose of your vessel Will it hold flowers? Or utensils? Or just be art? (2 pts)







SPECIFICATIONS:
TRIVET:
1. SIZE: no wider than 6x6 No thicker than ________________
2. Must have cutouts (holes in the form of specific shapes)
3. Must have feet. Feet should not be thicker than .
4. Must be level and NOT curve at edges AT ALL. (Let it dry upside down!)


VESSEL:
1. No taller than 11
2. No shorter than 8
3. Bottom must be SEAMLESSLY BLENDED with sides (see demo)
4. Must match design of trivet. Can have cutouts too, but they need to be at the top.

Sketch of vessel:
10 pts
Sketch of trivet:
10 pts

You might also like