720P HD Camcorder Manual

(Ball-point pen Type)

Remark: This picture only for reference
A. Introduction
Thanks for purchasing this product. It is equipped with various practical functions integrating digital
photography, video recorder and audio recorder function, with fashionable and dainty appearance, stable
and outstanding quality, wide and diversified purposes. It will bring you the new and memorable
experiences of use and is the indispensable tool for you.
The functions of this machine include high definition, video recording, high definition photography, quality
audio record, PC camera, and movable disk.
The characteristics of this machine include various functions, various purpose, fashionable appearance,
outstanding video recording effect, handy and portable, easy use, stability, reliability and rapid response,
etc.
This machine is applicable for the purposes of reporter interview, wonderful snap shoot, emergency
record, living fragment record, recreation record, sports record, aided teaching record, family security
monitoring, criminal investigation and evidence-collecting for legal purpose, landscape record during
travel, outdoors exploration record and backing memory, etc.

B. Product Profile


NO Name Description
1 Operation key
Its a multi-functional key with different functions in different
modes and states, including power-on, power-off, start to
record video, stop recording video, take photos, start to record
audio and stop recording audio.
2 Camera Used to catch image signals.
3 Mic Used to catch the audio signals.
4 Indicator lamps
There are three built-in red, green and blue indicator lamps,
three lamps in three colors may indicate the different
operating states of products in different combination modes.
5 Mode Switch Used to switch over the operating modes.
6 Standard 4 Pin USB The interface for connecting the data line and power cord.

Remark: This picture only for referen e c

C. Usage
1. Startup and Power-off

1.1 Startup
a. Press OPERATION KEY (part 1) for 2 seconds and then release it.
b. The power of product is turned on, the GREEN lamp will turn on and the product will enter into
the initialization status.
c. The GREEN lamp will turn off when the initialization is completed.
d. After startup, the device will enter into the default recording function standby status and the
RED lamp will turn on.
e. Startup is completed.

Note: The startup of this machine is similar to that of computer with a startup course, never make
any operation during this course till the startup is completed. The time duration of startup
initialization depends on the capacity of memory.

1.2 Power-off
a. Press OPERATION KEY (part 1) for 2 seconds and then release it.
b. The status indicator lamps will turn off to complete power-off.

Note: If the product is working when you turn off it, The system will automatically save the files
being recorded at present and power off.

2. Switch over the Operating Modes
a. Change the status of MODE SWITCH(part 5) in startup status of this product to switch over
the operating modes.
b. When the MODE SWITCH is in position 1, The device enter the video record mode, The RED
lamp will turn on. When the MODE SWITCH is in position 2, The device enter the photograph
mode, The BLUE lamp will turn on. When the MODE SWITCH is in a position 3, The device enter
the audio record mode, The GREEN lamp will turn on.
c. If operating mode is switched over when the product is used to record video, take pictures or
record the system will automatically save the files being recorded at present and then switch over
to the next operating mode.

3. Video Record
a. It will enter into the default video record mode after startup or switch over to video record
mode by the MODE SWITCH.
b. The RED light will keep on when the device is in standby status of this mode.
c. Press the OPERATION KEY shortly to start the video record and the RED lamp will turn from
constantly ON status to even and slow flicker status.
d. Press OPERATION KEY shortly again to stop video recording and save the file being
recorded, the RED light will turn from flicker status to constantly ON status.

Note: To guarantee the size and safety of photography files, the system will automatically save
the file once every 30 minutes and continue to record video. Please make sure the camera not
being blocked with sufficient illumination, keep the product body vertical and stable, with over
50cm distance with the objects to be recorded to get the images with right direction, natural
colors, clear images and stable images. Never block the microphone sound gate to ensure the
sound recording effect.

4. Take Pictures
a. Switch over the device to photograph mode.
b. The BLUE light will keep on when the device is in standby status of this mode.
c. It will take one picture and the BLUE light will flicker once every time the OPERATION KEY is
pressed shortly.

Note: Please make sure the camera not being blocked with sufficient illumination, keep the
product body vertical and stable, with over 50cm distance with the objects to be recorded to get
the images with right direction, natural colors, clear images and stable images.

5. Audio Record
aSwitch over the device to audio record mode.
bThe GREEN light will keep on when the device is in standby status of this mode.
cPress the OPERATION KEY shortly to start the audio record and the GREEN lamp will turn
from constantly ON status to even and slow flicker status.
dPress OPERATION KEY shortly again to stop audio recording and save the file being
recorded, the GREEN light will turn from flicker status to constantly ON status.

Note: To guarantee the size and safety of photography files, the system will automatically save
the file once every 60 minutes and continue to record audio. Never block the microphone sound
gate to ensure the sound recording effect.

6. PC Camera
When the unit is in this mode, you can chat with your friends on line with web camera, or hold the
net-conference with your co-workers of company; or you can apply the novel and interesting
purposes like shooting posters, etc. via the Windows programs provided by any third party. The
method of entering into computer web camera mode is shown as below.
a. Turn off the device at first. Keep the OPERATION KEY is pressed and use the usb data
cable to connect your product to computer USB port.
b. Release the OPERATION KEY after the device enter the PC Camera mode.
c. Enter the PC Camera mode, Open MY COMPUTER, the icon of web cam will appear on the
screen to indicate that the web cam function of product is started up normally.

Note: Not always that the computer can detect web cam function due to the computer
configuration or the system differences. If the product cannot enter into web cam mode, but into
the movable disk mode occasionally, please remove this unit, start up this unit and re-connect it
to the computer. If you just use the computer web cam function of this machine on your computer
for the first time, please install the web cam driver attached to the floppy disk or provided by the
distributor; to prevent this product from being damaged, please connect one end of data line to
the computer before connecting it to the computer, connect the other end of data line to the
computer. Temporarily, the computer web cam function of this unit can only support WINDOWS
operating system.

7. Movable disk
This unit may be used as a movable disk, with the method of usage shown as below.
a. Turn off the device, connect the device to the computer with USB data cable, the movable
disk icon will pop up in the computer.
b. The directory for saving video file is *Disk\ _REC\100MEDIA.
c. To dismantle the device, please click the movable device management icon at the right lower
corner to remove this movable memory device and after the computer has confirmed to
disconnect the hardware safety, disconnect the device and computer.

Note: The time for computer to identify the movable disk is relative to the computer configuration,
operating system and memory capacity, please wait patiently during this course and never
operate the unit, which may affect the hardware identification. If the movable disk cannot be
recognized for a long time, please try to re-connect; if it is not recognized yet, please confirm if
your operating system, motherboard driver, USB port and connection line can work normally.


8. Charge
Connect the product to the power adaptor or computer to charge it. The RED light will flicker
slowly when the battery is being charged and will keep on when the battery is charged completely.

Note: This unit is built in with high capacity polymer lithium battery without memory effect, which
may be charged during use. But for the first five times of use, please run out the battery power
and then charge to the full to activate the highest capacity of battery and obtain the standard
working hours; to maximize the battery power storage capacity, please continue to charge for 30
minutes to 1 hour when the indicator lamp indicates the full charging status upon charging every
time. Please make sure that the power supply complies with the standard USB power supply
specifications.

9. FAQs
a. Q: Why the indicator lamp does not respond after I have pressed the startup key on my device
for a long time?
A: Please check if the device power is run out and its recommended to connect the power
adaptor, computer or standby power source to charge the product, then try if it may be powered
on normally.

b. Q: Why the RED, BLUE and GREEN lights on my product will flicker rapidly and
simultaneously and then the product will automatically power off 10 seconds later?
A: When it happens during operation, it indicates that the memory space runs out, the device
will automatically save the file being recorded at present and it indicates the auto power-off
around 10 seconds. If you shall continue to record video files, please delete the files you dont
need again from the computer.

c. Q: Why the RED, BLUE and GREEN lights on my product will flicker alternatively and then the
product will automatically power off 10 seconds later?
A: It indicates the insufficient battery power, its recommended to use this player after it is
charged completely.

d. Q: What shall I do if my product cannot respond for more than 1 minutes and no keypad can
respond?
A: You need reset the device. Please plug the device into the computer or charger, and then
keep the OPERATION KEY is pressed and disconnect the usb

D. Parameters
Item Parameters
Video format AVI
Video encoding M-J PEG
Video resolution 1280*720
Media playing software Attached software of the operating system or Mainstream audio and
video media playing software, recommend Kmplayer
Picture format J PG
Udisk supporting OS Windows me/2000/xp/2003/vista/7, Mac OS10.4 (uncertainty, depends on
the computer model)
PC Camera Windows me/2000/xp/2003/vista/7
charge pressure DC-5V
Interface type 4 Pin USB
Storage support Nand flash
Battery type high-capacity lithium polymer

E. Warning
Application: Please strictly abide relevant regulations and laws. This product should not be
used for any illegal purposes. The user is fully responsible for its using purpose.
Battery: If do not use this recording function after long time, please charged it fully before using.
File security: This product is not a professional storage device. It does not guarantee the
integrity and security of saved files. Please back up your important documents on the computer or
other storage device timely.
Video quality: This product is not a professional video recording device. It Does not guarantee
the effect of the video file to have the professional quality
Operating temperature: 040C. For the extension of life, it is best used at room temperature.
Shooting brightness: Do not expose the camera directly to strong light, such as the sun light,
to avoid damage to optical devices.
Cleaning: Do not use it under the environment with high dust density to avoid the contamination
of camera lens or other components.