Scribd Logo
Upload

Welcome to Scribd!

  • 159 views

    September - D 120 P SCSSV and SSV Leak Test

    Uploaded by

    Hossein
    The document details the results of a leak and hold test conducted on a well for a 30 minute period, recording the wellhead pressure at 5 minute intervals. The test was performed according to SIMOPS instructions, with the subsurface safety valve and surface safety valve holding the well shut-in without any leakage. Observations were normal throughout.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    September - D 120 P SCSSV and SSV Leak Test

    Uploaded by

    Hossein
    159 views1 page
    The document details the results of a leak and hold test conducted on a well for a 30 minute period, recording the wellhead pressure at 5 minute intervals. The test was performed according to SIMOPS instructions, with the subsurface safety valve and surface safety valve holding the well shut-in without any leakage. Observations were normal throughout.

    Original Description:

    sp

    Original Title

    September- D 120 P SCSSV and SSV Leak Test

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document details the results of a leak and hold test conducted on a well for a 30 minute period, recording the wellhead pressure at 5 minute intervals. The test was performed according to SIMOPS instructions, with the subsurface safety valve and surface safety valve holding the well shut-in without any leakage. Observations were normal throughout.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    159 views1 page

    September - D 120 P SCSSV and SSV Leak Test

    Uploaded by

    Hossein
    The document details the results of a leak and hold test conducted on a well for a 30 minute period, recording the wellhead pressure at 5 minute intervals. The test was performed according to SIMOPS instructions, with the subsurface safety valve and surface safety valve holding the well shut-in without any leakage. Observations were normal throughout.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    DATE:

    WELL No.
    Time
    interval
    W/H Pressure
    05 Min. 25 05 Min. 25
    10 Min. 25 10 Min. 25
    15 Min. 25 15 Min. 25
    20 Min. 25 20 Min. 25
    25 Min. 25 25 Min. 25
    30 Min. 25 30 Min. 25
    Time
    interval
    W/H Pressure
    05 Min.
    25 05 Min. 25
    10 Min.
    25 10 Min. 25
    15 Min.
    25 15 Min. 25
    20 Min.
    25 20 Min. 25
    25 Min.
    25 25 Min. 25
    30 Min.
    25 30 Min. 25
    Remarks Actions are inhibited as per SIMOPS instructions
    Prior to start operation inforn control room to depresurised flow line
    SCSSV and SSV are hodling well and no leak.
    Performer Majid
    Majid Shetty Jean Louis
    D - 120 P
    Obervations
    Obervations
    SSV LEAK TEST / HOLD TEST
    Up stream Pressure
    Well Shut in Pressure
    53
    SCSSV Closed
    SSV Open
    SSV Closed
    SCSSV Open
    Status
    RSES
    53 25
    Observations
    Field Supervisor
    25
    W/H pressure
    after
    depresuriseing
    SCSSV LEAK / HOLD TEST
    SIMOPS TEST
    LEAK / HOLD TEST FOR SCSSV / SSV
    North East Cluster
    10.09.05
    Status
    Flow line pressure
    During test
    Production Supdt.
    W/H pressure
    after
    depresuriseing
    Flow line pressure Up stream Pressure
    Well Shut in Pressure During test

    You might also like