Scribd
Upload
21 views1 page

Method of Controlling The Quality

The document describes a method for controlling the quality of cementing casing strings used by Rosneft, an open society in Russia. The method uses two coefficients - one for the contact between the cement and the string, and one for the contact between the cement and the formation. Each coefficient calculates a quality value based on the length of intervals with different levels of contact quality, with values over 80 considered good quality.

Uploaded by

emiljuchiac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
21 views1 page

Method of Controlling The Quality

The document describes a method for controlling the quality of cementing casing strings used by Rosneft, an open society in Russia. The method uses two coefficients - one for the contact between the cement and the string, and one for the contact between the cement and the formation. Each coefficient calculates a quality value based on the length of intervals with different levels of contact quality, with values over 80 considered good quality.

Uploaded by

emiljuchiac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Method of controlling the quality

of cementing casing strings



Quality of cementing strings is by results of Open Society Rosnefts
Standard of a cementing quality control of casing strings in wells:
1. Coefficient of quality of contact btw a cement stone and a string


= (1 + 0,7 + 0,3)/(+++),
Where , , , are lengths of intervals with good, partial, poor
and no contact btw a cement stone and a string, m.
2. Coefficient of quality of contact btw a cement stone and formation


= (1 + 0,7)/(++),
Where , , are lengths of intervals with good, partial, poor and
no contact btw a cement stone and formation, m.
Quality of cementing can be seen on a scale:
100 > 80 good;
80 > 63 satisfactory;
63 > 20 bad;
20 > 0 very bad.

You might also like