Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Parts & Service News: Component Code: 25 Ref No. Date AH05518 June 27, 2005

    Uploaded by

    JOKOdekide
    This document provides instructions for regularly checking wear on swing circle pinions for various construction machinery models every 5,000 operating hours. It specifies that pinions are surface hardened and wear reaching the hardening depth could decrease component life. A table lists machinery types and models, corresponding swing gear boxes, and the hardening depth specification for each to guide the wear check. If wear reaches the hardening depth, the pinion should be replaced to ensure proper machine function.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Parts & Service News: Component Code: 25 Ref No. Date AH05518 June 27, 2005

    Uploaded by

    JOKOdekide
    20 views2 pages
    This document provides instructions for regularly checking wear on swing circle pinions for various construction machinery models every 5,000 operating hours. It specifies that pinions are surface hardened and wear reaching the hardening depth could decrease component life. A table lists machinery types and models, corresponding swing gear boxes, and the hardening depth specification for each to guide the wear check. If wear reaches the hardening depth, the pinion should be replaced to ensure proper machine function.

    Original Title

    Ah 05518

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for regularly checking wear on swing circle pinions for various construction machinery models every 5,000 operating hours. It specifies that pinions are surface hardened and wear reaching the hardening depth could decrease component life. A table lists machinery types and models, corresponding swing gear boxes, and the hardening depth specification for each to guide the wear check. If wear reaches the hardening depth, the pinion should be replaced to ensure proper machine function.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    Parts & Service News: Component Code: 25 Ref No. Date AH05518 June 27, 2005

    Uploaded by

    JOKOdekide
    This document provides instructions for regularly checking wear on swing circle pinions for various construction machinery models every 5,000 operating hours. It specifies that pinions are surface hardened and wear reaching the hardening depth could decrease component life. A table lists machinery types and models, corresponding swing gear boxes, and the hardening depth specification for each to guide the wear check. If wear reaches the hardening depth, the pinion should be replaced to ensure proper machine function.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    COMPONENT CODE:

    25
    PARTS & SERVICE NEWS
    REF NO.
    DATE
    AH05518
    June 27, 2005

    Page 1 of 2

    AH05518

    This PARTS & SERVICE NEWS supersedes the previous issue 21 - 503 which should be
    discarded.

    SUBJECT: Swing circle pinion

    PURPOSE: Wear check every 5000 Operating hours

    APPLICATION: PC3000; PC4000; PC5500; PC8000

    FAILURE CODE: 2518CA

    DESCRIPTION:

    All swing pinions are surface hardened to ensure a long service life.
    If the depth of the wear reaches the hardening depth, the wear of the pinion will be rapid.
    The increased tooth back-lash and the different tooth meshing, could decrease the service
    life of the slew ring and the swing gear box(es).

    By means of regular wear check , every 5000 operating hours, the depth of the wear
    should be compared to the original shape.




    Page 2 of 2


    AH05518


    The following table shows the machines with the pertaining swing gear box(es) and the
    corresponding hardening depth:


    Type PN Swing gear box Hardening depth
    PC3000 898 100 40 2.0
    917 915 40 2.0
    924 352 40 2.0
    926 795 40 2.0
    PC4000 898 100 40 2.0
    925 864 40 1.8
    +0.4
    926 795 40 2.0
    PC5500 898 100 40 2.0
    917 915 40 2.0
    925 864 40 1.8
    +0.4

    926 795 40 2.0
    PC8000 917 915 40 2.0
    924 325 40 2.0
    926 325 40 2.0



    If the depth of the wear reaches the hardening depth, the slew
    pinion should be replaced, to ensure a proper function of the
    machine.

    You might also like