Inverted Metallurgical Microscopes

GX SERIES
1
Industry-leading
*
UIS2 Optics Take Digital
Micro Imaging Systems to the Next Generation
The optical system, heart of a microscope, uses our UIS2 infinity-corrected optical system evolved
from the industrial leading UIS2 optical system. High quality images are obtained for every
observation method, and the performance of the digital camera is optimized in flexibility. Digital
images transferred to a PC can be easily used by use of advanced image analysis software.
The GX series is Olympus' most advanced inverted metallurgical microscope system. With addition
of motorized functions, complete integration into all digital imaging subsystem is possible to provide
advanced solutions for cutting edge research by its digital imaging system in pursuit of high quality
and simplicity, motorized modules which
increase observation efficiency, and other
beneficial features.
The GX Series also strongly promotes
environmentally-friendly manufacturing with a
lead-free optical system.
2
GX51+DP21
GX71 (motorized model) +DP73
Specimen: 8-layer printed circuit board (Section)
Specimen courtesy of Miyamagiken Co., Ltd.
* According to Olympus own survey of the wavefront aberration control
in the top grade objective lenses marketed in 2008.
3
Images of the Excellent Performance Created with
UIS2 Wavefront Aberration Control
Natural color reproduction faithful to the
specimen
UIS2 objective lenses realize natural color
reproduction without any chromatic shifts using
stringently selected high transmittance glass and
advanced coating technology that provides high
transmittance which is flat over a wide band
wavelength. In addition, since the total optical
system, including the tube lens is designed to
reproduce a natural color, clear images faithful to
the specimen are obtained even with digital imaging.
An example of 3D display of a wave front measured with a laser
interferometer. The flatter the surface of the lens, the better the
aberration correction becomes.
V value
W

v
a
l
u
e
A comparison of the color temperature of UIS2 objective lenses
and conventional UIS objective lenses. The color temperature of
the UIS2 objective lenses is within a range which is very close to
the color temperature target, which represents ideal white value.
Conventional image UIS2 image
Color temperature comparison
UIS2
Conventional UIS
Ideal white value
A New standard of the objective lens perfor-
mance, using wavefront aberration control
The Olympus UIS2 objective lenses set a new
standard, with wavefront aberration control in
addition to common performance standards of
N.A. and W.D. Olympus challenges top grade
optics which has not been fulfilled by the
conventional standards. We offer excellent
performance objective lenses by lowering the
aberrations that lower resolution.
4
Promotes environmentally-friendly
ecologization and weight reduction
Olympus has considered the environment and has
tackled ecologization of microscopes. As part of
this, on introduction of UIS2 optical system, eco-
friendly glass free of lead and arsenic is used in the
objective lenses and the major Semi-apochromatic
UIS2 objective lenses are lightened by
approximately 2/3. This contributes to prevention
of environmental pollution, improvement of
operability of objective lenses replacement, etc.
*Some UIS2 objective lenses are the same weight as conventional
objective lenses
Removes spot flare during low magnification
observation
When a low reflection specimen is observed in
lower power magnifications, spot flare may hinder
precise observation. In UIS2 low power
observation, a depolarizer built into the objective
lens end removes spot flare and, a clear, high
contrast image is obtained by combining a set of
polarizer and analyzer plate.
* 1.25x and 2.5x objective
lenses available
MPLFLN1.25x
UIS2
Spot flare
No depolarizer
Since the light reflected from the
surface of the objective lenses is
the linearly-polarized light as is,
it is eliminated by analyzer at
Crossed Nicol position and has
no affect on the image. On the
other hand, the light passed
through the depolarizer at the
end of the objective lens
becomes unpolarized light, and
when the unpolarized light
reflected from the specimen
passes through the analyzer,
only the linearly-polarized light
that matches the vibration
direction of the analyzer passes
through and forms an image.
Spot flare removal principle conceptual diagram
Analyzer
Polarizer
Objective lens
Depolarizer
Specimen
Linearly-
polarized light
Flare
Unpolarized light
Operations that you want to save various
powered modules fulfill your requirements
Thanks to various motorized modules, speedy
magnification change, easy observation mode
selection from brightfield to simple polarizing and
illumination filter switching are performed through
hand control panel or PC. Automation allows the
operator to focus on the crisp UIS2 images.
You only need to add the automation you need
without adding any extras.
Motorized revolving nosepieces U-D6REM, U-D5BDREM and
motorized filter wheel U-FWR can also be added onto the GX51.
Image analysis software OLYMPUS Stream is required for
control from a PC.
Getting the optimized image with any
observation method
The UIS2 infinity-corrected optical system was
developed with Olympus unique knowledge
and the GX series is designed to perform well in
the context of inverted metallurgical microscopes.
The results are sharp, detailed images with
excellent contrast and consistently high clarity with
any and all observation methods. Equipped with
100 W halogen lamp and newly improved
efficiency, the GX series microscopes provide the
intense and even illumination.
The bright darkfield images
The UIS2 contrast has improved brightness and
delivers better sensitivities for holes or flaws on
metallographic structure.
5
High-performance Research and Quality Control are
Enhanced by Automated Modules
Motorized mirror unit turret/
GX-RTUA
Motorized
observation method
switching
Motorized objective
lens switching
Nomar
Brightfield
Darkfield
Conventional image
UIS2 image
The GX71 motorized configuration requires the control box, IX2-UCB and the cable, U-REMMT.
Motorized sextuple BF
revolving nosepiece with
slider slot for DIC/
U-D6REM
Motorized quintuple
revolving nosepiece for
BD with slider slot for
DIC/
U-D5BDREM
6
Hand switch/U-HSTR2
Motorized reflected filter wheel/
U-FWR
Motorized
reflected light on/off
ski DIC
Fluorescence
Simple polarizing
Nomarski DIC system provides an optimum
image suited to the sample
Olympus Nomarski DIC observation uses a simple
observation switching slider type single prism
system. Three different DIC prisms are provided:
the U-DICR for all imaging applications, high
resolution U-DICRH, and high contrast U-DICRHC,
so that the excellent resolution and contrast
matched to the state of the sample are obtained.
Since the exit pupil position of the objective lens is
standardized by the series, the position of the DIC
prism does not have to be switched when the
magnification was changed by switching the
objective lens.
5x 20x 100x 150x
U-DICR
U-DICRH
U-DICRHC
H
i
g
h
c
o
n
t
r
a
s
t
H
i
g
h
r
e
s
o
l
u
t
i
o
n
Priority on resolution
U-DICRH
For general specimen
U-DICR
Priority on contrast
U-DICRHC
7
S
i
d
e

p
o
r
t
Digital camera
GX71
Video camera
Standard
C mount adapter
Digital Micro Imaging Solutions for Obtaining
High Quality Microscopic Images
Digital imaging ? No, it is digital micro imaging
High resolution objective lenses, high transmittance
optical system and uniform brightness illumination
system extract excellent performance from the
digital camera. Olympus offers two types of digital
imaging device, space-saving simple-operation
standalone models, and completely controlled PC-
basis models, for all observation methods ranging
from brightfield to fluorescence. Choose the
camera matched to your purpose and budget.
Olympus offers digital micro imaging solutions for
microscopes based on many years of
optoelectronics technologies.
Accurate post-imaging measurements
Integration with a coded revolving nosepiece
allows sharing and recording of objective lens
magnification. A coded revolving nosepiece
eliminates errors that occur when the wrong
magnification is manually recorded by the operator.
The coded revolving nosepiece is available in two
types; for brightfield objective lens and for
brightfield/darkfield objective lens.
UIS2 objective lenses with excellent image
parcentricity
High power Semi-apochromatic UIS2 objective
lenses make the centration tolerance between
objective lenses on the microscope nosepiece
keep the image within the center of the field of
view even with digital cameras.
Conventional image
UIS2 image
U-CBS
U-D5BDRES-ESD
U-D5RES-ESD
8
F
r
o
n
t

p
o
r
t
Digital camera
GX51
Video camera
GX-SPU side port
intermediate tube
(optional)
GX C mount adapter
High-resolution Digital Camera DP73
Captures High-resolution, High-sensitivity
Digital Images Fast
This outstanding 17.3-megapixel cooled digital
camera with pixel-shift technologies attains
superior resolving power, sensitivity and precise
14-bit (16384 steps) color fidelity. The DP73 is
compatible with all the light microscopic
observation methods and produces contrast
balanced images using a unique dynamic range
technology. ISO1600 sensitivity delivers clear
display even for faint fluorescence signals.
A high definition 1600 x 1200-pixel image can be
displayed live at a rate of 15 frames per second,
without compression and a maximum 4800 x
3600-pixel image can be instantly saved.
GX51+DP26
Digital Camera DP21/DP26
Smooth live image display
High-speed image capturing which allows
sequential shooting
The 2-megapixel color CCD camera, DP21 can be
controlled from a space intuitively operated hand-
switch. The camera has the power to display
UXGA images comparable to high-definition at a
smooth 15 frames per second. Seamless viewing
is sustained even when changing focus or moving
the inspection spot. The hand-switch incorporates
the 12 most frequently used measurement
functions for efficient inspection of industrial parts.
The high-resolution 5-megapixel color CCD
camera, DP26 provides excellent performance in
brightfield observation for most applications. The
DP26 incorporates progressive scanning that is
free from color shift and offers high-speed
IEEE1394b connectivity. Handset type is also
optional.
Both models accommodate a wide range of
applications in the OLYMPUS Stream, imaging
analysis software.
GX71+DP73
OLYMPUS Stream provides interactive
measurement functions such as distances,
angles, rectangles, circles, ellipses and polygons.
The measurements are made with your mouse
and show immediate feedback indicated on the
image or in the live data table. All results are
saved with the image files as records. To further
improve on accuracy, optical data such as
system magnification are automatically available
when combined with the Olympus Microscope
system.
9
Making the Optimal Use of Microscope Digital Imaging
OLYMPUS Streamthe More Freedom, the More Comfort
Count and measure*
Keep your workflow streamlined
In addition to control digital cameras, microscopes and
coded revolving nosepieces, the OLYMPUS Stream
image analysis software has made possible seamless
operation throughout your workflow: an easy-to-use
interface guides you effortlessly through every step
from image adjustment and capture, measurements,
report creations and archivingor whatever you need
to achieve. The OLYMPUS Stream software system
can be purchased in a variety of packages designed to
fit your needs.
Object detection and size distribution measurement are among the most important
applications in digital imaging. OLYMPUS Stream incorporates a detection engine that
utilizes threshold methods to reliably separate objects (e.g. particles, scratches) from the
background. OLYMPUS Stream offers more than 50 different parameters for shape, size,
position, and pixel properties (intensity, gray value) for object classification.
*Optional software for OLYMPUS Stream Essentials and more-advanced packages
Using the OLYMPUS Stream image navigation
allows you to pan and zoom on live or stored
images. The image navigator interface provides
immediate updates at your location on both the
zoomed and unmagnified images. The navigation
system provides you with fast, immediate views
of your sample before you acquire an image. All
image viewing and manipulation is carried out
with a clean, simple user interface, providing fast
and intuitive results.
OLYMPUS Stream software provides MIA to
enable the creation of panoramic images of
samples that extend beyond the field of view.
The simple step-by-step process allows you to
quickly combine the images. The OLYMPUS
Stream software then quickly stitches them
together, providing you with an output ready for
simple visualization or complex measurement.
Live image navigation Basic measurement Manual Multiple Image Alignment (MIA)
Save your data and export it to your customized
report, which can be edited in Microsoft Word.
Report generation
Object detection and classification
Live image navigation (composite material)
Measurement result using Magic Wand** (cast iron)
**Available for OLYMPUS Stream Essentials and more-advanced
packages
Multiple image acquisition of shape memory alloy
This module is for steel manufacturers measuring
and controlling the shape and size of non-
metallic inclusions (oxide, alumina, sulphide, or
silicate) in steel. OLYMPUS Stream can evaluate
non-metallic inclusion with the results created
automatically according to international
standards (ASTM E45 Method A and DIN 50602
Method M).
OLYMPUS Stream provides intuitive
workflow interfaces
With the click of an icon on the Materials Solution tool
window, you can execute the most complex image
analysis task quickly, precisely, and in compliance with
most common international standards.
10
This module is for casting manufacturers who
need to measure and control the graphite
nodularity to check the mechanical
characteristics of their cast products. With
OLYMPUS Stream, this nodularity can be
calculated by graphite size, shape, and
distribution. The results are automatically created
according to industrial standards (JIS G5502,
ASTM E247, and ISO945).
This module is for steel manufacturers measuring
and controlling grain size after cross-sectioning,
polishing or etching steel samples. OLYMPUS
Stream can calculate the grain size number G by
the intercept or planimetric method automatically
with no time consuming manual actions. The
results are created according to international
standards (JIS G5502, ASTM E112, and
DIN50601).
A live or still image can be compared with
standard charts. Overlay comparisons can be
made, and function preview is available. This
module can be used for ASTM grain size number
evaluation, non-metallic inclusion rating, and
cast-iron shape class evaluation. Steel
microstructure with superimposed reference
image as overlay for live evaluation.
Grain sizing intercept/planimetric Cast iron
Chart comparison
Non-metallic inclusion rating in steel
1 Acquire Image
2 Process Image
3 Analyze Image
4 Create Report
Start A New Sample
Grain sizing (intercept) Polished cast iron
Non-metallic inclusion rating in steel
Grain sizing (planimetric)
*Please refer to OLYMPUS Stream catalog for further details
Example: Grains Planimetric
1 2 3 4
Zoom function for easy framing
The 1x-2x zoom facility acts on all ports,
shows critical specimen detail more clearly
and makes accurate framing especially
easy as well as allowing image capture at
the same magnification as the
visual observation.
11
BF DF POL DIC FL
F.N.
26.5
2x
ZOOM
MAX
4Ports
TOP-OF-THE-LINE INVERTED
METALLURGICAL SYSTEM MICROSCOPE
GX71
TOP-OF-THE-LINE INVERTED
METALLURGICAL SYSTEM MICROSCOPE
GX71
1x
Truthful reproduction of specimen in
image forming and acquisition
Viewing images are not reversal, the exact
reproduction of specimen in vertical/
horizontal directions. The true reproduction
makes it easier to compare the images with
digital photos.
*Images are reversed if seen via a video/digital camera attached
to the side/front port.
Five observation methods from
brightfield to fluorescence
Simply by changing the position of the
GX71's mirror unit turret, it is quick and easy
to alternate between brightfield, darkfield,
Nomarski DIC, simple polarized light and
fluorescence observation. The Olympus
universal objective lenses accommodate all
observation methods. There is no need to
change the objective lens type each time the
observation method is changed. The GX71
also employs super widefield eyepieces
(F.N.26.5), for an efficient orientation and
observation process.
2x
Top-notch Performance for Today's Leading-edge Research
12
F.N.
22
MAX
3Ports
BF DF POL DIC
INVERTED METALLURGICAL
SYSTEM MICROSCOPE
INVERTED METALLURGICAL
SYSTEM MICROSCOPE
GX51 GX51
Single lever switchover for
brightfield/darkfield observation
The versatile GX51 performs brightfield,
darkfield, Nomarski DIC and simple polarized
light observations. Switching between
brightfield and darkfield observation is done
with a single lever, located close to the
operator's hand. Changing to Nomarski DIC
observation is a simple matter of inserting
the DIC-slider.
Expandable functionality
A wide variety of optional units can be
easily attached to the GX51, allowing such
system upgrades as linking to a digital or
video camera via an intermediate tube
(GX-SPU).
Designed for ease to use and efficiency
Good working efficiency is the top design
priority of the GX51, which was specially
developed for handling routine inspection
tasks. Its most frequently used operating
features are located at the front, while
incorporation of the tilting tube U-TBI90
(elevation angle 35-85 degree) allows the
operator to work in an easy, natural posture
and conduct observations comfortably in a
standing position.
Superb Performance and Reliability for All Kinds of
Routine Observation and Documentation
GX71/GX51 ACCESSORIES
13
GX51 observation tube
Besides trinocular tube
U-TR30H-2, the lineup includes
binocular tube U-BI90, for use in
combination with an eyepoint
adjuster, and tilting tube U-TBI90,
which allows observations to be
made in whatever posture suits
the individual user.
Intermediate tubes
Other high-performance
accessories are available to meet a
variety of applications. Included are
an intermediate tube (IX-ATU),
which allows attachment of a
trinocular observation tube, a side
port intermediate tube (GX-SPU)
and an eyepoint adjuster (U-EPA2).
Filters
The GX series comes with a select
range of filters, including neutral
density, color temperature
conversion and green filters.
Two slider slots are provided,
each allowing introduction of up to
three filters.
GX71 observation tubes
The super widefield binocular
observation tube (U-SWBI30) and
super widefield trinocular
observation tube (U-SWTR-3) are
provided for the GX71.
Lamp housing
A variety of light sources to
accomplish bright and even
illumination are provided,
according to your purpose.
Revolving nosepieces
Sextuple revolving nosepieces and
quintuple revolving nosepieces
with DIC slider compatibility are
also provided.
Drawing attachment / U-DA
As well as its conventional use
as drawing attachment, this
accessory also provides a
macro observation function.
When combined with a
trinocular observation tube,
the macro images are stored
as photomicrographs or
retained in the digital camera.
U-D6RE
U-5BDRE
U-D5BDRE
IX-ATU
GX-SPU
U-EPA2
U-SWTR-3
U-SWBI30
U-TR30H-2
U-BI90CT
U-BI90
U-TBI90
*Use U-BI90CT in combination with U-EPA2 or
GX-SPU.
U-LH100HG
U-LH100-3
U-LH75XEAPO
Scales
In addition to the calibration scales
for each objective lens, grain size
reticules and square scales can
also be recorded. Up to 3 scales
can be freely combined in a single
slider.
GX51 GX71 GX51
GX51
GX71
GX71
GX51 GX71
GX51 GX71
GX51 GX71
* Use in combination with 10x lens for drawing
attachment U-DAL10x.
14
GX71 dimensions
(unit: mm) (unit: mm)
GX51 dimensions
446
243 140
3
1
7
280 145
203
213 400
4
5
5
213
3
1
7
438 145
203 235
280
140
363
4
2
5
SCALE
GX series specifications
GX71 GX51
Optics UIS2 optical system (infinity-corrected)
Microscope frame Intermediate magnification Zoom incorporated (1 x2 x)

Clicks in the two intermediate positions (can be released)

Imprinting of scale All ports All ports
Reversed positions (up/down/left/right) from observation Reversed positions (up/down) from observation
positions seen through the eyepiece positions seen through the eyepiece
Power source Power source for illuminator (12 V 100 W halogen) incorporated
Focusing Manual, Coarse and Fine coaxial handle. Focus stroke 9 mm (2 mm above and 7 mm below the stage surface)
Output port Front port Video and DP system (reversed image, special video adapter for GX)
Side port Video, DP system (reversed image) Side port (option) Video, DP system (upright image)
Observation tube Super widefield (F.N. 26.5) U-SWBI30, U-SWTR-3
Widefield (F.N. 22) U-BI90, U-TR30H-2
Illumination Observation method Brightfield, darkfield, simple polarized light, DIC, fluorescence Brightfield, darkfield, simple polarized light, DIC
Illuminator diaphragm FS/AS manually controlled, with centering adjustment
Light source 100 W halogen (standard), 100 W mercury, 75 W xenon (option)
Revolving nosepiece Manual operation Sextuple for BF/DIC, quintuple for BF/DF, quintuple for BF/DF/DIC, coded quintuple for BF, coded quintuple for BF/DF/DIC,
centerable quadruple for BF
Motorized operation Sextuple for BF/DIC, quintuple for BF/DF/DIC
Stage Standard type Right handle stage for GX (X/Y stroke: 50 x 50 mm)
Option Flexible right handle stage, left short handle stage (each X/Y stroke: 50 x 50 mm), Gliding stage
Stage insert plate A set of teardrop and long hole types
Image recording Digital camera, video camera OLYMPUS DP series etc, attachable using appropriate adapters
Combined weight Approx. 39 kg (BF, DF and DIC observations, combined with DP73) Approx. 28 kg (BF, DF and DIC observations, combined with DP21)
Input rating 100120/220240 V 1.8/0.8 A 50/60 Hz
objective lens specifications
W.D.
Cover Glass
Resolution*
2
Objective lenses Magnifications N.A. Thickness*
1
(mm)
(mm)
(m)
5x 0.10 20.0 3.36
10x 0.25 10.6 1.34
MPLN*
7
*
8
20x 0.40 1.3 0 0.84
50x 0.75 0.38 0 0.45
100x 0.90 0.21 0 0.37
5x 0.10 12.0 3.36
10x 0.25 6.5 1.34
MPLN-BD*
4
*
7
*
8
20x 0.40 1.3 0 0.84
50x 0.75 0.38 0 0.45
100x 0.90 0.21 0 0.37
20x 0.45 8.37.4 01.2 0.75
LCPLFLN-LCD 50x 0.70 3.02.2 01.2 0.48
100x 0.85 1.20.9 00.7 0.39
W.D.
Cover Glass
Resolution*
2
Objective lenses Magnifications N.A. Thickness*
1
(mm)
(mm)
(m)
50x 0.95 0.35 0 0.35
MPLAPON
100x 0.95 0.35 0 0.35
MPLAPON 100xOil*
3
1.4 0.1 0 0.24
1.25x*
4
*
5
0.04 3.5 8.39
2.5x*
5
0.08 10.7 4.19
5x 0.15 20.0 2.24
MPLFLN
10x 0.30 11.0 1.12
20x 0.45 3.1 0 0.75
40x*
6
0.75 0.63 0 0.45
50x 0.80 1.0 0 0.42
100x 0.90 1.0 0 0.37
5x 0.15 12.0 2.24
10x 0.30 6.5 1.12
MPLFLN-BD*
7
20x 0.45 3.0 0 0.75
50x 0.80 1.0 0 0.42
100x 0.90 1.0 0 0.37
150x 0.90 1.0 0.37
5x 0.15 12.0 2.24
10x 0.25 6.5 1.34
MPLFLN-BDP*
7
20x 0.40 3.0 0 0.84
50x 0.75 1.0 0 0.45
100x 0.90 1.0 0 0.37
5x 0.13 22.5 2.58
10x 0.25 21.0 1.34
LMPLFLN 20x 0.40 12.0 0 0.84
50x 0.50 10.6 0 0.67
100x 0.80 3.4 0 0.42
5x 0.13 15.0 2.58
10x 0.25 10.0 1.34
LMPLFLN-BD*
7
20x 0.40 12.0 0 0.84
50x 0.50 10.6 0 0.67
100x 0.80 3.3 0 0.42
*
1
: Applicable to the view of specimens with/without a cover glass
0 : Applicable to the view of specimens without a cover glass.
*
2
Resolution values are calculated with the aperture diaphragm fully opened.
*
3
Specified oil: IMMOIL-F30CC.
*
4
Field numbers are limited (up to F.N.22). Not compatible with F.N.26.5.
*
5
Analyzer and polarizer are recommended to the usage with MPLFLN1.25x or 2.5x.
*
6
The MPLFLN40x objective lens is not compatible with the differential interference contrast
microscopy.
*
7
"BD" refers to brightfield and darkfield objective lenses
*
8
Slight vignetting may occur in the periphery of the field when MPLN-BD series objective lenses are
used with high-intensity light sources such as mercury and xenon for darkfield observation.
15
SYSTEM DIAGRAM
GX-SPU*
1
Side port
intermediate tube
U-DA*
5
Drawing
attachment
GX51F
GX51
microscope
stand
GX71F*
1
GX71 microscope
stand
GX-RTUA*
11
Motorized mirror
unit turret
U-TR30H-2
Trinocular tube
U-CA
Magnification
changer 1x,
1,25x, 1.6x, 2x
IX-ATU
Intermediate
tube
U-EPA2
Eyepoint
adjuster
U-BI90
Binocular tube
90
U-TBI90
Tilting
binocular
tube
U-BI90CT
Binocular tube
90CT
WHN10x
WHN10x-H
Eyepiece
U-MDF3
U-MDIC3
U-MBFL3
U-MWGS3
U-MWBS3
U-MWUS3
Mirror units
*
1
Please consult your nearest Olympus dealer for cameras compatible with the GX71F side port and GX-SPU.
*
2
Using the camera with an image sensor less than 1/2 inch in size. Even in this case, illumination near the perimeter of the field of view may slightly insufficient.
*
3
Using the camera with an image sensor less than 2/3 inch in size.
*
4
Using the camera with an image sensor less than 1 inch in size.
*
5
Macro observation image sizes are fractionally smaller than the SWH10x-H field of view (F.N.26.5).
*
6
U-DICRH should be used exclusively with MPLFLN series objective lenses and U-DICRHC should be used exclusively with LMPLFLN series objective lenses.
*
7
IX2-UCB-2 power supply unit is required for U-D6REM and U-D5BDREM.
GX-SLM
Scale slider
CK40M-MS
Stage mirror
GX51-SLMG5
Scale glass 5x
GX51-SLMG10
Scale glass 10x
GX51-SLMG20
Scale glass 20x
GX51-SLMG50
Scale glass 50x
GX51-SLMG100
Scale glass 100x
GX51-SLMGS
Grain size reticule
GX51-SLMGH
Grid pattern scale glass
GX-SLMG
Parfocal glass
VIDEO SYSTEM,
DIGITAL CAMERA
VIDEO ADAPTER
U-TV0.35xC-2*
2
C mount video port
with 0.35x lens
U-TV0.5xC-3*
3
C mount video port
with 0.5x lens
U-TV0.63xC
C mount video port
with 0.63x lens
U-TV1x-2*
4
Video port with 1x lens
SWH10x-H
Eyepiece
U-SWBI30
Super widefield
binocular tube
U-DAL10x
Drawing
attachment 10x
U-SWTR-3
Super widefield
trinocular tube
GX-CCV
UV shield
DIGITAL CAMERA
U-FMT
F mount
adapter
U-CMT
C mount
adapter
IX-TVAD
Primary image
camera port tube
GX-TV0.5xC*
3
C-mount video port with
0.5x lens
GX-TV0.7xC*
3
C-mount video port with
0.7x lens
DIGITAL CAMERA
U-ECA
Magnification
changer 2x
16
U-LH100-3
100W halogen
lamp housing
LIFE TIME
BURNER ON
U-RX-T
LIFE TIME
BURNER ON
U-RFL-T
GX-SLM
Scale slider
U-FWR*
11
Motorized
reflected
filter wheel
U-LH100-3
100W halogen
lamp housing
U-DULHA
Dual lamp
housing
attachment
U-RMT
Extension cord
TH4*
10
External light
source
U-LH75XEAPO*
9
75W xenon apo
lamp housing
U-RFL-T
Power supply unit for
mercury lamp
U-RX-T
Power supply unit for
xenon lamp
U-LH100HG*
9
100W mercury
lamp housing
U-LH100HGAPO*
9
100W mercury apo
lamp housing
GX-PO
Polarizer slider for reflected light
GX-POTP
Polarizer slider for reflected light
GX-AN
Analyzer for reflected light
GX-AN360
Rotatable analyzer
*
8
Objective lenses may touch the stage when revolving the U-D6BDRE, U-P5BDRE incorrectly.
*
9
25L42 filter is required for polarized light and Nomarski DIC observation using high intensity lamps such as U-LH100HG.
*
10
TH4 is only necessary when transmitted and reflected light illuminations are used simultaneously.
*
11
IX2-UCB and U-HSTR2 are required for U-FWR and GX-RTUA.
*
12
Connectin with DP21 or DP26 microscope digital camera required.
*
13
When rotating the revolving nosepiece, objective lenses may touch the stage insert plate depending on the stage position.
GX-SVR
Right handle
stage for GX
CK40-CPG30
Stage
insert plate
IX-CP50
Insert plate
GX-CP
Stage insert plate
(incorporated)*
13
Circular stage
insert plate
Teardrop stage
insert plate
GX-SFR
Flexible right
handle stage
IX2-SFR
Cross stage with
Flexible right
handle
IX-SVL-2
Flexible left
handle stage,
short
UIS2 objective lenses
U-DICR
DIC slider for
reflected light
U-DICRH*
6
DIC slider for
reflected light
(high resolution
type)
U-DICRHC*
6
DIC slider for
reflected light
(high contrast
type)
PMG3-LWCD
Long working
distance
condenser
IX2-GS
Gliding stage
U-POT
Polarizer
U-D6REM*
7
Motorized
sextuple
revolving
nosepiece
with slider
slot for DIC
U-D5BDRES-ESD
Coded quintuple
revolving
nosepiece for
BF/DF with slider
slot for DIC

U-5BDRE
Quintuple
revolving
nosepiece
for BD/DF
U-5RES-ESD
Coded
quintuple
revolving
nosepiece
U-D5BDREM*
7
Motorized
quintuple
revolving
nosepiece for
BF/DF with slider
slot for DIC
U-D5BDRE
Quintuple
revolving
nosepiece
for BF/DF with
slider slot
for DIC
U-D6RE
Sextuple
revolving
nosepiece
with
slider slot
for DIC
U-D6BDRE*
8
sextuple revolving
nosepiece for
BF/DF with slider
slot for DIC
U-P5BDRE*
8
Centerable
revolving
nosepiece
U-P4RE
Centerable
revolving
nosepiece
GX-FSL
Filter slider
U-LH100L-3
100W halogen
lamp housing
25ND6
25ND25
ND filter
IX2-ILL100
100W transmitted
light illumination
pillar LH
25FR
25LBD
25IF550
Filter
GX71-SLMG100
Scale glass 100x
GX71-SLMGS
Grain size reticule
GX71-SLMGH
Grid pattern scale glass
GX-SLMG
Parfocal glass
U-CBS
Control box for
coded fuction
DP21-SAL*
12
DP21 standalone system
PC (Software)
GX71-SLMG5
Scale glass 5x
GX71-SLMG10
Scale glass 10x
GX71-SLMG20
Scale glass 20x
GX71-SLMG50
Scale glass 50x
M1699E-052013
OLYMPUS CORPORATION is ISO9001/ISO14001 certified.
Illumination devices for microscope have suggested lifetimes.
Periodic inspections are required. Please visit our web site for details.
All company and product names are registered trademarks and/or trademarks of their respective owners.
Images on the PC monitors are simulated.
Specifications and appearances are subject to change without any notice or obligation on the part of the manufacturer.
Wendenstrasse 14-18, 20097 Hamburg, Germany
3500 Corporate Parkway, Center Valley, Pennsylvania 18034-0610, U.S.A.
11F, K, Wah Centre, 1010 Huaihai Rd(M), Xuhi District, Shanghai, P.R.C
Shinjuku Monolith, 3-1, Nishi Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan Olympus-Tower, 114-9 Samseong-Dong, Gangnam-Gu, Seoul, Korea
491B River Valley Road, #12-01/04 Valley Point Office Tower, Singapore
31 Gilby Road, Mt. Waverly, VIC 3149, Melbourne, Australia
5301 Blue Lagoon Drive, Suite 290 Miami, FL 331269, U.S.A.
www.olympus-ims.com
For enquiries - contact
www.olympus-ims.com/contact-us