Scribd Logo
Upload

Welcome to Scribd!

  • 961 views

    TDS 11sa

    Uploaded by

    MohamedAbdel-Rahman
    This document provides lubrication guidelines for a TDS-11SA drilling rig. It lists various components that require grease or oil lubrication on daily, weekly, or periodic schedules. Grease points are identified on diagrams and instructions are given for applying the appropriate type and amount of grease. Recommended lubricant types are provided for hydraulic oil, gear oil, and general purpose grease based on expected temperature ranges. An oil lubrication schedule includes replacing fluids and filters periodically and conducting analysis, as well as general condition checks of the rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS 11sa

    Uploaded by

    MohamedAbdel-Rahman
    961 views1 page
    This document provides lubrication guidelines for a TDS-11SA drilling rig. It lists various components that require grease or oil lubrication on daily, weekly, or periodic schedules. Grease points are identified on diagrams and instructions are given for applying the appropriate type and amount of grease. Recommended lubricant types are provided for hydraulic oil, gear oil, and general purpose grease based on expected temperature ranges. An oil lubrication schedule includes replacing fluids and filters periodically and conducting analysis, as well as general condition checks of the rig.

    Original Description:

    Top Drive TDS11-SA NOV Drilling

    Original Title

    TDS-11SA

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides lubrication guidelines for a TDS-11SA drilling rig. It lists various components that require grease or oil lubrication on daily, weekly, or periodic schedules. Grease points are identified on diagrams and instructions are given for applying the appropriate type and amount of grease. Recommended lubricant types are provided for hydraulic oil, gear oil, and general purpose grease based on expected temperature ranges. An oil lubrication schedule includes replacing fluids and filters periodically and conducting analysis, as well as general condition checks of the rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    961 views1 page

    TDS 11sa

    Uploaded by

    MohamedAbdel-Rahman
    This document provides lubrication guidelines for a TDS-11SA drilling rig. It lists various components that require grease or oil lubrication on daily, weekly, or periodic schedules. Grease points are identified on diagrams and instructions are given for applying the appropriate type and amount of grease. Recommended lubricant types are provided for hydraulic oil, gear oil, and general purpose grease based on expected temperature ranges. An oil lubrication schedule includes replacing fluids and filters periodically and conducting analysis, as well as general condition checks of the rig.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Grease Fitting

    (1 each side)
    Apply two pumps of
    general purpose
    grease
    Hydraulic
    Oil Filter
    Hydraulic
    Oil Level
    Sight Gauge
    Hydraulic
    Oil Fill
    (Disconnect)
    Gear Oil
    Sight Gauge
    Check with
    Top Drive
    OFF
    Gear Oil Filter
    Apply light
    coat of grease
    to gear teeth
    Grease Fitting
    (4, if equipped)
    Apply one pump of
    general purpose grease
    Guide Beam
    As Viewed
    from Rear
    (Roller-type
    Carriage Only
    Slide-type
    Carriage does
    not have
    Grease Points
    Grease Fitting
    (1 each per Bogie,
    if equipped)
    Apply one pump of
    general purpose grease
    Carriage Bogie
    (4)
    Grease Fittings
    To each fitting apply
    three pumps of
    general purpose grease
    Torque Arrestor
    Tubes Grease
    Locations
    Apply grease
    to torque arrestor
    tubes with a brush.
    Lubricate the link eyes
    with pipe dope
    Grease Fitting
    Apply one pump of
    general purpose grease
    Using hand
    pump only
    Gearbox
    Oil Fill
    1
    1 2 3
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    1
    Grease Fitting
    Apply one pump of
    general purpose grease
    at beginning of tour
    Ambient
    Temperature
    Range
    Lubricant
    Code and
    Type
    DESCRIPTION NO. OF POINTS DAILY WEEKLY TYPE
    Wash Pipe Assembly
    Upper Bonnet Seal
    Bail Pins
    Rotating Link Adapter Gear
    Rotating Link Adapter
    IBOP Actuator Yoke and Cylinder Pins
    IBOP Actuator Cranks
    Stabilizer Bushing
    Clamp Cylinder Gate
    Carriage Assembly
    Torque Arrestor at Clamp Cylinder Area
    Elevator Link Eyes
    See lubrication section of the TDS-11SA service manual for lubrication of electric motors
    1
    1
    2

    2
    5
    2
    4
    2
    8
    4
    4

    Castrol
    Chevron
    Exxon
    Gulf
    Mobil
    Shell
    Statoil
    Texaco
    Total
    Union
    NGLI
    AGMA
    ISO Viscosity
    Grade
    Above -20 C
    (Above -4 F)
    MP Grease
    Avi-Motive
    Lidok EP2
    Gulf Crown EP32
    Mobilux EP2
    Alvania EP2
    Uniway EP2N
    Multifak EP2
    Multis EP2
    Unoba EP2
    2
    N/R
    N/R
    Below -20 C
    (Below -4 F)
    N/R
    Avi-Motive W
    Lidok EP1
    Gulf Crown EP31
    Mobilux EP1
    Alvania EP1
    Uniway EP1N
    Multifak EP1
    Multis EP1
    Unoba EP1
    1
    N/R
    N/R
    Above 21 C
    (Above 70 F)
    Alpha LS-320
    NL Gear 320
    Spartan EP320
    EP Lube HD320
    MobilGear 632
    Omala 320
    Loadway EP320
    Meropa 320
    Carter EP 320
    Extra Duty NL6EP
    N/R
    6EP
    320
    7 to 30 C
    (45 to 85 F)
    Alpha LS-150
    NL Gear 150
    Spartan EP150
    EP Lube HD150
    MobilGear 629
    Omala 150
    Loadway EP150
    Meropa 150
    Carter EP 150
    Extra Duty NL4EP
    N/R
    4EP
    150
    -6 to 16 C
    (20 to 60 F)
    Alpha LS-68
    NL Gear 68
    Spartan EP68
    EP Lube HD68
    MobilGear 626
    Omala 68
    Loadway EP68
    Meropa 68
    Carter EP 68
    Extra Duty NL2EP
    N/R
    2EP
    68
    -10 to 85 C
    (14 to 185 F)
    General Purpose Grease Gear Oil Hydraulic Oil
    Hyspin AWS-46
    AW Hyd oil 46
    Nuto H46
    Harmony 46AW
    DTE 25
    Tellus 46
    Hydraway HMA 46
    Rando oil HD46
    Azolla ZS 46
    Unax AW46
    N/R
    2
    46
    -15 to 75 C
    (5 to 167 F)
    Hyspin AWS-32
    AW Hyd oil 32
    Nuto H32
    Harmony 32AW
    DTE 24
    Tellus 32
    Hydraway HMA 32
    Rando oil HD32
    Azolla ZS 32
    Unax AW32
    N/R
    N/R
    32
    Recommended Lubricants
    TDS-11SA Lubrication
    and Maintenance Guidelines
    Varco P/N 125770
    See Service Manual for More Detail
    Grease Lubrication Schedule
    2
    3
    3
    DESCRIPTION FREQUENCY TYPE
    Replace Gearbox Oil and Perform an Oil Analysis
    Replace Gearbox Oil Filter
    Perform Hydraulic System Oil Analysis
    Replace Hydraulic Fluid
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    Check for missing lockwire
    Check for loose or broken parts and leaks
    Check for damaged guide beam rollers
    Check condition of both filter gauges
    Check for missing cotter pins
    Check for loose electrical connectors and check lockwire
    Check gear oil and hydraulic fluid levels
    Replace Hydraulic System Filter
    1 x every 6 Months
    1 x every 3 Months
    1 x every 6 Months
    1 x every 3 Months
    1 x Year, or Earlier
    Based on Oil Analysis
    Oil Lubrication Schedule
    General Condition Checks
    Weekly
    1 Weekly
    1 Weekly
    Weekly
    Weekly
    Weekly
    Grease Fittings
    (if equipped)
    Apply one pump of
    general purpose
    grease
    Grease Fittings
    To each fitting
    apply one pump of
    general purpose grease
    1
    1
    1
    Weekly
    Weekly
    1
    Grease Fittings
    (1 each side)
    To each fitting
    apply one pump of
    general purpose grease
    Grease Fitting
    (1 each side)
    Apply one pump of
    general purpose grease
    Grease Fitting
    (1 each side)
    Apply one pump of
    general purpose grease
    Daily
    Daily
    Daily
    Daily
    Daily
    Daily
    Daily
    Oil viscosity should be adjusted based on expected ambient conditions for next six months
    2
    3

    You might also like