MS-7641

760GM-P24 (FX)/
760GM-P22 (FX)/
760GM-P21 (FX)
series
MS-7641 (v3.x) Mainboard

G52-76411X8


Copyright Notice
The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents. Our products are under
continual improvement and we reserve the right to make changes without notice.

Trademarks
All trademarks in this manual are properties of their respective owners.

MSI is registered trademark of Micro-Star Intl Co.,Ltd.

NVIDIA is registered trademark of NVIDIA Corporation.
ATI is registered trademark of ATI Technologies, Inc.
AMD is registered trademarks of AMD Corporation.
Intel is registered trademarks of Intel Corporation.
Windows is registered trademarks of Microsoft Corporation.
AMI is registered trademark of American Megatrends, Inc.
Award is a registered trademark of Phoenix Technologies Ltd.
Sound Blaster is registered trademark of Creative Technology Ltd.
Realtek is registered trademark of Realtek Semiconductor Corporation.
JMicron is registered trademark of JMicron Technology Corporation.
Netware is a registered trademark of Novell, Inc.
Lucid is trademarks of LucidLogix Technologies, Ltd.
VIA is registered trademark of VIA Technologies, Inc.
ASMedia is registered trademark of ASMedia Technology Inc.
iPad, iPhone, and iPod are trademarks of Apple Inc.

Revision History

Revision

Revision History

Date

V3.0

First release

2011/05

V3.1

Add 860GM-P43 (FX)

2011/08

V3.2

For 760GM-P24 (FX)/ 760GM-P22 (FX)/

760GM-P21 (FX)

2011/08

MS-7641

Safety Instructions

Always read the safety instructions carefully.

Keep this User Manual for future reference.
Keep this equipment away from humidity.
Lay this equipment on a reliable flat surface before setting it up.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. Do not cover the openings.

Make sure the voltage of the power source is at 110/220V before connecting.

Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.
All cautions and warnings on the equipment should be noted.
Never pour any liquid into the opening that can cause damage or cause electrical shock.

If any of the following situations arises, get the equipment checked by service
personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according
to User Manual.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60C (140F), IT MAY DAMAGE THE EQUIPMENT.

Technical Support
If a problem arises with your system and no solution can be obtained from the
users manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS updates, driver updates, and
other information: http://www.msi.com/service/download

Contact our technical staff at: http://support.msi.com

FCC-B Radio Frequency Interference Statement

This equipment has been
tested and found to comply
with the limits for a class B
digital device, pursuant to
part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the measures
listed below.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/ television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.

VOIR LA NOTICE DNSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International
MS-7641

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

MS-7641

Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to
return, recycle, or treat them in compliance with the local regulations.
Taiwan:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please
visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

BSMI_EMI

WEEE Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI
must remind you that...
Under the European Union (EU) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes effect on
August 13, 2005, products of electrical and electronic equipment
cannot be discarded as municipal wastes anymore, and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of
their useful life. MSI will comply with the product take back requirements at the
end of life of MSI-branded products that are sold into the EU. You can return these
products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt
Gem der Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte drfen
Elektro- und Elektronik-Altgerte nicht mehr als kommunale Abflle entsorgt
werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen
beauftragt, die in die Europische Union in Verkehr gebrachten Produkte, am
Ende seines Lebenszyklus zurckzunehmen. Bitte entsorgen Sie dieses Produkt
zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgertesammelstelle
in Ihrer Nhe.
FRANAIS
En tant qucologiste et afin de protger lenvironnement, MSI tient rappeler
ceci...
Au sujet de la directive europenne (EU) relative aux dchets des quipement
lectriques et lectroniques, directive 2002/96/EC, prenant effet le 13 aot 2005,
que les produits lectriques et lectroniques ne peuvent tre dposs dans les
dcharges ou tout simplement mis la poubelle. Les fabricants de ces quipements seront obligs de rcuprer certains produits en fin de vie. MSI prendra en
compte cette exigence relative au retour des produits en fin de vie au sein de la
communaut europenne. Par consquent vous pouvez retourner localement ces
matriels dans les points de collecte.

MSI
, , ....
()

( WEEE 2002/96/EC),
13 2005 , ,
, ,

. MSI
,
MSI EC, .
.

MS-7641
ESPAOL
MSI como empresa comprometida con la proteccin del medio ambiente,
recomienda:
Bajo la directiva 2002/96/EC de la Unin Europea en materia de desechos y/
o equipos electrnicos, con fecha de rigor desde el 13 de agosto de 2005, los
productos clasificados como elctricos y equipos electrnicos no pueden ser
depositados en los contenedores habituales de su municipio, los fabricantes de
equipos electrnicos, estn obligados a hacerse cargo de dichos productos al
termino de su perodo de vida. MSI estar comprometido con los trminos de
recogida de sus productos vendidos en la Unin Europea al final de su periodo
de vida. Usted debe depositar estos productos en el punto limpio establecido por
el ayuntamiento de su localidad o entregar a una empresa autorizada para la
recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat.
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in
zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit
soort producten worden verplicht om producten retour te nemen aan het eind van
hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten
die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen
geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zatitili prirodnu sredinu, i kao preduzee koje vodi rauna o okolini i prirodnoj sredini, MSI mora da vas podesti da
Po Direktivi Evropske unije (EU) o odbaenoj ekektronskoj i elektrinoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi
koji spadaju pod elektronsku i elektrinu opremu ne mogu vie biti odbaeni
kao obian otpad i proizvoai ove opreme bie prinueni da uzmu natrag ove
proizvode na kraju njihovog uobiajenog veka trajanja. MSI e potovati zahtev
o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI
oznaku i koji su prodati u EU. Ove proizvode moete vratiti na lokalnim mestima
za prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako firma dbajca o ekologi, MSI
przypomina, e...
Zgodnie z Dyrektyw Unii Europejskiej (UE) dotyczc odpadw produktw elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), ktra wchodzi w ycie 13
sierpnia 2005, tzw. produkty oraz wyposaenie elektryczne i elektroniczne nie
mog by traktowane jako mieci komunalne, tak wic producenci tych produktw
bd zobowizani do odbierania ich w momencie gdy produkt jest wycofywany z
uycia. MSI wypeni wymagania UE, przyjmujc produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z uycia. Produkty MSI bdzie mona zwraca
w wyznaczonych punktach zbiorczych.

TRKE
evreci zelliiyle bilinen MSI dnyada evreyi korumak iin hatrlatr:
Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik Malzeme At, 2002/96/
EC Kararnamesi altnda 13 Austos 2005 tarihinden itibaren geerli olmak zere,
elektrikli ve elektronik malzemeler dier atklar gibi pe atlamayacak ve bu
elektonik cihazlarn reticileri, cihazlarn kullanm sreleri bittikten sonra rnleri
geri toplamakla ykml olacaktr. Avrupa Birliine satlan MSI markal rnlerin
kullanm sreleri bittiinde MSI rnlerin geri alnmas istei ile ibirlii ierisinde
olacaktr. rnlerinizi yerel toplama noktalarna brakabilirsiniz.
ESKY
Zle nm na ochran ivotnho prosted - spolenost MSI upozoruje...
Podle smrnice Evropsk unie (EU) o likvidaci elektrickch a elektronickch
vrobk 2002/96/EC platn od 13. srpna 2005 je zakzno likvidovat elektrick
a elektronick vrobky v bnm komunlnm odpadu a vrobci elektronickch vrobk, na kter se tato smrnice vztahuje, budou povinni odebrat takov
vrobky zpt po skonen jejich ivotnosti. Spolenost MSI spln poadavky na
odebrn vrobk znaky MSI, prodvanch v zemch EU, po skonen jejich
ivotnosti. Tyto vrobky mete odevzdat v mstnch sbrnch.
MAGYAR
Annak rdekben, hogy krnyezetnket megvdjk, illetve krnyezetvdknt
fellpve az MSI emlkezteti nt, hogy ...
Az Eurpai Uni (EU) 2005. augusztus 13-n hatlyba lp, az elektromos
s elektronikus berendezsek hulladkairl szl 2002/96/EK irnyelve szerint
az elektromos s elektronikus berendezsek tbb nem kezelhetek lakossgi
hulladkknt, s az ilyen elektronikus berendezsek gyrti kteless vlnak az
ilyen termkek visszavtelre azok hasznos lettartama vgn. Az MSI betartja
a termkvisszavtellel kapcsolatos kvetelmnyeket az MSI mrkanv alatt az
EU-n bell rtkestett termkek esetben, azok lettartamnak vgn. Az ilyen
termkeket a legkzelebbi gyjthelyre viheti.
ITALIANO
Per proteggere lambiente, MSI, da sempre amica della natura, ti ricorda che.
In base alla Direttiva dellUnione Europea (EU) sullo Smaltimento dei Materiali
Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono pi
essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguer a tale
Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti allinterno
dellUnione Europea alla fine del loro ciclo di vita. possibile portare i prodotti
nel pi vicino punto di raccolta

MS-7641

Table of Content
English............................................................................. 11

Getting startED........................................................................................11
SPECIFICATIONS............................................................................................12
Screw Holes...............................................................................................14
REAR PANEL...................................................................................................15
HARDWARE SETUP........................................................................................15
BIOS Setup....................................................................................................24

.................................................................................. 31

............................................................................................................31
...................................................................................................................32
...........................................................................................................34
...........................................................................................................35
...................................................................................................35
BIOS .........................................................................................................44

Franais.......................................................................... 51

Pour commencer......................................................................................51
SPCIFICATIONS............................................................................................52
Trous tarauds.........................................................................................54
Panneau arrire.......................................................................................55
Installation du matriel.......................................................................55
Rglage bios...............................................................................................64

DEUTSCH........................................................................... 71

eINLEITUNG....................................................................................................71
SPEZIFIKATIONEN..........................................................................................72
SCHRAUBENLCHER....................................................................................74
Hinteres Anschlusspanel.....................................................................75
HARDWARE SETUP........................................................................................75
BIOS Setup....................................................................................................84

........................................................................... 91

..........................................................................................91
........................................................................................92
...........................................................................94
.........................................................................................95
.....................................................................95
BIOS........................................................................................104

............................................................................ 111

.................................................................................................................111
.................................................................................................................112
.............................................................................................................114
..........................................................................................................115
..........................................................................................................115
BIOS .......................................................................................................124

............................................................................ 131

.................................................................................................................131
.................................................................................................................132
.............................................................................................................134
.................................................................................................................135
..........................................................................................................135
BIOS .......................................................................................................144

................................................................................ 151

..........................................................................................................151
........................................................................................152
.............................................................................................................154
I/O........................................................................................................155
.............................................................................155
BIOS.....................................................................................................164

10

MS-7641

English
Getting startED
Thank you for choosing the 760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX)
(MS-7641 v3.x) Micro-ATX mainboard. The 760GM-P24 (FX)/ 760GM-P22 (FX)/
760GM-P21 (FX) is based on AMD 760G & SB710 chipset for optimal system
efficiency. Designed to fit the advanced AMD processor in AM3+ package, the
760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) Series deliver a high performance and professional desktop platform solution.
Layout
Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JUSB_PW2
JTPM1

JUSB1

JUSB2

SATA6

JCOM 1

SATA5

JLPT1(optional)

SATA3

JFP2
JAUD1

SATA1

PCI1

SATA2

AMD
SB710

(optional)
SATA 4

PCI_E2

JFP1

11

SPECIFICATIONS
Processor
AMD FX / Phenom II / Athlon II / Sempron processors in an AM3+
package.
(For the latest information about CPU, please visit
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0, supports up to 5.2 GT/s
Chipset
North Bridge: AMD 760G chipset
South Bridge: AMD SB710 chipset
Memory
DDR3 800/ 1066/ 1333 SDRAM (total 16GB Max)
2 DDR3 DIMMs (240pin / 1.5V)
(For more information on compatible components, please visit
http://www.msi.com/service/test-report/)
LAN
Supports LAN 10/100/1000 Fast Ethernet by Realtek 8111E (760GM-P24
(FX)/ 760GM-P22 (FX))
Supports LAN 10/100 Fast Ethernet by Realtek 8105E (760GM-P21 (FX))
Audio
Chip integrated by Realtek ALC892 (760GM-P24 (FX))
Chip integrated by Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
Supports 7.1 channels audio out
Compliant with Azalia 1.0 Spec
SATA
4 SATA 3Gb/s ports by AMD SB710 (760GM-P21 (FX))
6 SATA 3Gb/s ports by AMD SB710 (760GM-P24 (FX)/ 760GM-P22 (FX))
RAID
SATA 1~4 support RAID 0/ 1/ 10 or JBOD mode by AMD SB710 (760GMP21 (FX))
SATA 1~6 support RAID 0/ 1/ 10 or JBOD mode by AMD SB710 (760GMP24 (FX)/ 760GM-P22 (FX))
Connectors
Back Panel I/O
1 PS/2 mouse port
1 PS/2 keyboard port
1 VGA port
6 USB 2.0 ports
1 LAN jack
6 flexible audio jacks (760GM-P24 (FX))
3 flexible audio jacks (760GM-P22 (FX)/ 760GM-P21 (FX))
Onboard Connectors
2 USB 2.0 connectors
1 front audio connector

12

MS-7641

1 chassis Intrusion connector

1 serial port connector
1 parallel port connector (optional)
1 TPM connector

Slots
1 PCIE x16 slot
1 PCIE x1 slot
1 PCI slot, supports 3.3V/ 5V PCI bus Interface
Form Factor
Micro-ATX (244mm x 209mm)
Mounting
6 mounting holes

If you need to purchase accessories and request the part numbers, you could
search the product web page and find details on our web address below
http://www.msi.com/index.php

13

Screw Holes
When you install the mainboard, you have to place the mainboard into the chassis in the correct direction. The locations of screws holes on the mainboard are
shown as below.

The side has to

toward the rear,
the position for the
I/O shield of the
chassis.

Screw holes
Refer above picture to install standoffs in the appropriate locations on chassis and
then screw through the mainboard screw holes into the standoffs.

Important
* To prevent damage to the mainboard, any contact between the mainboard circuit
and chassis or unnecessary standoffs mounted on the chassis is prohibited.
* Please make sure there is no metal components placed on the mainboard or
within the chassis that may cause short circuit of the mainboard.

14

MS-7641

REAR PANEL
The rear panel provides the following connectors:

Mouse

LAN
Line-In RS-Out
VGA Port

Line-Out CS-Out

USB 2.0 Ports

Keyboard

MIC SS-Out
(optional)

HARDWARE SETUP
CPU & Cooler Installation for AM3+
When you are installing the CPU, make sure the CPU has a cooler attached on the
top to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPU before installing the heat sink/cooler fan for better heat dispersion.

The surface of AM3+ CPU.

Remember to apply some thermal
paste on it for better heat dispersion.

Gold arrow

15

Follow the steps below to install the CPU & cooler

correctly. Wrong installation will cause the damage of
your CPU & mainboard.
.

Pull the lever sideways away from the socket.

Make sure to raise the lever up to a 90-degree
angle.

2.

Look for the gold arrow of the CPU. The gold

arrow should point as shown in the picture. The
CPU can only fit in the correct orientation.

3.

If the CPU is correctly installed, the pins should

be completely embedded into the socket and can
not be seen. Please note that any violation of the
correct installation procedures may cause permanent damages to your mainboard.

4.

Press the CPU down firmly into the socket and

close the lever. As the CPU is likely to move
while the lever is being closed, always close the
lever with your fingers pressing tightly on top of
the CPU to make sure the CPU is properly and
completely embedded into the socket.

5.

Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first.

6.

Then press down the other end of the clip to

fasten the cooling set on the top of the retention
mechanism. Locate the Fix Lever and lift up it .

7.

Fasten down the lever.

8.

Attach the CPU Fan cable to the CPU fan connector on the mainboard.

Important
While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an
eye on your fingers, because once the Safety Hook is disconnected from the fixed
bolt, the fixed lever will spring back instantly.

16

MS-7641
Installing Memory Modules
. The memory module has only one notch on the center and will only fit in the
right orientation.
2.

Insert the memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the DIMM slot.
The plastic clip at each side of the DIMM slot will automatically close when the
memory module is properly seated. You can barely see the golden finger if the
memory module is properly inserted in the DIMM slot.

3.

Manually check if the memory module has been locked in place by the DIMM
slot clips at the sides.

Volt

Notch

Important
* In Dual-Channel mode, make sure that you install memory modules of the same
type and density in different channel DIMM slots.
* To enable successful system boot-up, always insert the memory modules into
the DIMM1 first.

17

ATX 24-Pin Power Connector: JPWR1

This connector allows you to connect an ATX 24-pin power supply. To connect the
ATX 24-pin power supply, make sure the plug of the power supply is inserted in
the proper orientation and the pins are aligned. Then push down the power supply
firmly into the connector.

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4-Pin Power Connector: JPWR2

This 4-Pin power connector is used to provide power to the CPU.

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

Important
Make sure that all the connectors are connected to proper ATX power supplies to
ensure stable operation of the mainboard.
Serial ATA Connector: SATA1 ~ 6
This connector is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.

Important
Please do not fold the Serial ATA cable into a 90-degree angle. Otherwise, data
loss may occur during transmission.

18

MS-7641
Fan Power Connectors: CPUFAN, SYSFAN1
The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and
should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage
of the CPU fan control.
CPUFAN

SYSFAN1

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

Front Panel Connectors: JFP1, JFP2

These connectors are for electrical connection to the front panel switches and
LEDs. The JFP1 is compliant with Intel Front Panel I/O Connectivity Design
Guide.
P
o

Spe

w
e
r
0

L
E
D

zer

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz

.+
8
.6 .+
4 .
2

.N

ch

it

JFP1

ake

Parallel Port Connector: JLPT1 (optional)

This connector is used to connect an optional parallel port bracket. The parallel
port is a standard printer port that supports Enhanced Parallel Port (EPP) and
Extended Capabilities Parallel Port (ECP) mode.

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

19

Serial Port Connector: JCOM1

This connector is a 16550A high speed communication port that sends/receives
16 bytes FIFOs. You can attach a serial device.
in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

Front Panel Audio Connector: JAUD1

This connector allows you to connect the front panel audio and is compliant with
Intel Front Panel I/O Connectivity Design Guide.
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

Front USB Connector: JUSB1, JUSB2

This connector, compliant with Intel I/O Connectivity Design Guide, is ideal for
connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like.
d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

20

MS-7641
TPM Module connector: JTPM1
This connector connects to a TPM (Trusted Platform Module) module. Please refer to the TPM security platform manual for more details and usages.

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

Chassis Intrusion Connector: JCI1

This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.

d
n
u RU
ro T
.G IN
2 .C
1

Clear CMOS Jumper: JBAT1

There is a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatically boot OS every time it is turned on. If you want to clear the system
configuration, set the jumper to clear data.

JBAT1

Keep Data

Clear Data

Important
You can clear CMOS by shorting 1-2 pin while the system is off, then open it. Avoid
clearing the CMOS while the system is on; it will damage the mainboard.

21

USB power Jumper: JUSB_PW1, JUSB_PW2

These jumpers are used to select USB ports powered by VCC5 or 5VSB. Set to
5VSB if you want the USB ports provide power in standby mode.

JUSB_PW1

(for rear USB

2.0 ports)
Keep USB
power to VCC5

Keep USB
power to 5VSB

JUSB_PW2
(for on-board
USB connectors)

Keep USB
power to VCC5

Keep USB
power to 5VSB

Important
If you set the jumper to 5VSB, the power supply must be able to provide at least
2A currents.

22

MS-7641
PCIE Slot
The PCIE slot supports the PCIE interface expansion card.

PCIE x16 slot.

PCIE x1 slot.

PCI Slot
The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards
that comply with PCI specifications.

Important
When adding or removing expansion cards, make sure that you unplug the power
supply first. Read the documentation for the expansion card to configure any
necessary hardware or software settings for, such as jumpers, switches or BIOS
configuration.
PCI Interrupt Request Routing
The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware
lines over which devices can send interrupt signals to the microprocessor. The PCI
IRQ pins are typically connected to the PCI bus pins as follows:
Order
Slot
PCI 1

INT E#

INT F#

INT G#

INT H#

23

BIOS Setup
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press <DEL> key to
enter Setup.
Press DEL to enter SETUP
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You
may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Main Page

Standard CMOS Features

Use this menu for basic system configurations, such as time, date etc.
Advanced BIOS Features
Use this menu to setup the items of special enhanced features.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
Power Management Setup
Use this menu to specify your settings for power management.
H/W Monitor
This entry shows the status of your CPU, fan, warning for overall system status.
Green Power
Use this menu to specify the power phase.

24

MS-7641
BIOS Setting Password
Use this menu to set BIOS setting Password.
Cell Menu
Use this menu to specify your settings for frequency/voltage control.
M-Flash
Use this menu to read/ flash the BIOS from USB media device.
Overclocking Profile
Use this menu to save/ load your settings to/ from CMOS for BIOS.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values that are factory settings for system
operations.
Load Optimized Defaults
Use this menu to load factory default settings into the BIOS for stable system
performance operations.
Save & Exit Setup
Save changes to CMOS and exit setup.
Exit Without Saving
Abandon all changes and exit setup.

25

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

It shows the current frequency of CPU/ DRAM/ CPU-NB. Read-only.
CPU Specifications
Press <Enter> to enter the sub-menu. This submenu shows the information of
installed CPU.
CPU Technology Support
Press <Enter> to enter the sub-menu. This sub-menu shows the technologies
that the installed CPU supported.
CPU Feature
Press <Enter> to enter the sub-menu:
AMD CoolnQuiet
The CoolnQuiet technology can effectively and dynamically lower CPU speed
and power consumption.

26

MS-7641
C1E Support
To enable this item to red the CPU power consumption while idle. Not all
porcessors support Enhanced Halt tate (C1E).
SVM Support
This item allows you to enable/disable the AMD SVM (Secure Virtual Machine)
Technology.
AMD CoolnQuiet
The CoolnQuiet technology can effectively and dynamically lower CPU speed
and power consumption.

Important
To ensure that CoolnQuiet function is activated and will be working properly, it is
required to double confirm that:
* Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD CoolnQuiet,
and set this item to Enabled.
* Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Options]. Enter Power Options Properties tag, and select Minimal Power Management under Power schemes.
C1E Support
To enable this item to read the CPU power consumption while idle. Not all porcessors support Enhanced Halt tate (C1E).
Adjust CPU FSB Frequency (MHz)
This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
OC Stepping
This item will be enabled after you set the overclocking frequency in the Adjust
CPU FSB Frequency (MHz). And the following items will appear. This items will
help the system to overclock step by step after system booting up.
Start OC Stepping From (MHz)
This item is used to set the initial base clock. The system will boot with the initial
base clock, and start to overclock from initial base clock to set base clock that
you set in Adjust CPU FSB Frequency (MHz) step by step.
OC Step
This item is used to set how many steps for base colck overclocking.
OC Step Count Timer
This item is used to set the buffer time for every step.
Adjust CPU Ratio
This item is used to adjust CPU clock multiplier (ratio). It is available only when the
processor supports this function.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Ratio
This item is used to adjust CPU-NB ratio.

27

Adjusted CPU-NB Frequency (MHz)

It shows the adjusted CPU-NB frequency. Read-only.
Unlock CPU Core
This item allows you to unlock the additional cores, you could set it [Enabled]
and then set Advanced Clock Calibration [Auto] in order to be able to activate the
processor cores.
Advanced Clock Calibration
This item is for overclock. Setting to [Auto] allows you to set the CPU Ratio higher.
It is available only when the processor supports this function.
CPU Core Control
This item is used to control number of CPU cores. When set to [Auto], the CPU will
operate under the default number of cores. When set to [Manual], you will be able
to enable/disable the specific CPU core.
Core X
These items are used to enable/disable the core X.
OC Genie Lite
Setting this item to [Enabled] allows the system to detect the maximum FSB clock
and to overclock automatically. If overclocking fails to run, you can try the lower
FSB clock for overclocking successfully.
Memory-Z
Press <Enter> to enter the sub-menu.
DIMM Memory SPD Information
Press <Enter> to enter the sub-menu. This sub-menu displays the information
of installed memory.
Advance DRAM Configuration
Press <Enter> to enter the sub-menu.
DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Auto] enables DRAM timings and
the following Advance DRAM Configuration sub-menu to be determined by
BIOS based on the configurations on the SPD. Selecting [Manual] allows users
to configure the DRAM timings and the following related Advance DRAM
Configuration sub-menu manually.
FSB/DRAM Ratio
This item allows you to select the ratio of FSB/ DRAM.
Adjusted DRAM Frequency (MHz)
It shows the adjusted Memory frequency. Read-only.
HT Link Control
Press <Enter> to enter the sub-menu.
HT Incoming/ Outgoing Link Width
These items allow you to set the Hyper-Transport Link width. Setting to [Auto],
the system will detect the HT link width automatically.

28

MS-7641
HT Link Speed
This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the
system will detect the HT link speed automatically.
Adjusted HT Link Frequency (MHz)
It shows the adjusted HT Link frequency. Read-only.
Auto Disable DRAM/PCI Frequency
When set to [Enabled], the system will remove (turn off) clocks from empty DRAM/
PCI slots to minimize the electromagnetic interference (EMI).
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
These items are used to adjust the voltage of CPU, Memory and chipset.
Spread Spectrum
When the mainboards clock generator pulses, the extreme values (spikes) of the
pulses create EMI (Electromagnetic Interference). The Spread Spectrum function
reduces the EMI generated by modulating the pulses so that the spikes of the
pulses are reduced to flatter curves. If you do not have any EMI problem, leave
the setting at Disabled for optimal system stability and performance. But if you are
plagued by EMI, set to Enabled for EMI reduction. Remember to disable Spread
Spectrum if you are overclocking because even a slight jitter can introduce a temporary boost in clock speed which may just cause your overclocked processor
to lock up.

Important
* If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the
value of Spread Spectrum for EMI reduction.
* The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local EMI regulation.
* Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.

29

Load Optimized Defaults

You can load the default values provided by the mainboard manufacturer for the
stable performance.

30

MS-7641

760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) (MS-7641 v3.x) MicroATX . 760GM-P24 (FX)/ 760GM-P22 (FX)/
760GM-P21 (FX) AMD 760G SB710
. AM3+ AMD
760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX)
.

Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JTPM1

JUSB1

JUSB2

SATA6

JUSB_PW2

SATA5

JCOM 1

SATA3

JLPT1(optional)

SATA1

JFP2
JAUD1

SATA2

AMD
SB710
PCI1

(optional)
SATA 4

PCI_E2

JFP1

31

AM3+ AMD FX / Phenom II / Athlon II / Sempron

.
(CPU
http://www.msi.com/service/cpu-support/ )
HyperTransport
HyperTransport 3.0, 5.2 GT/s

: AMD 760G
: AMD SB710

DDR3 800/ 1066/ 1333 SDRAM ( 16GB)

DDR3 DIMM 2(240 / 1.5V)
(
http://www.msi.com/service/test-report/ .)
LAN
Realtek 8111E LAN 10/100/1000 Fast Ethernet (760GM-P24
(FX)/ 760GM-P22 (FX))
Realtek 8105E LAN 10/100 Fast Ethernet (760GM-P21 (FX))

Realtek ALC892 (760GM-P24 (FX))

Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
7.1
Azalia 1.0 Spec
SATA
AMD SB710 SATA 3Gb/s 4 (760GM-P21 (FX))
AMD SB710 SATA 3Gb/s 6 (760GM-P24 (FX)/ 760GM-P22
(FX))
RAID
AMD SB710 RAID 0/ 1/ 10 JBOD SATA 1~4
(760GM-P21 (FX))
AMD SB710 RAID 0/ 1/ 10 JBOD SATA 1~6
(760GM-P24 (FX)/ 760GM-P22 (FX))

I/O
PS/2 1
PS/2 1
VGA 1
USB 2.0 6
LAN 1
6 (760GM-P24 (FX))
3 (760GM-P22 (FX)/ 760GM-P21 (FX))

USB 2.0 2

32

MS-7641

1
1
1
TPM 1

PCIE x16 1
PCIE x1 1
PCI 1, 3.3V/ 5V PCI

Micro-ATX (244mm x 209mm)

,
http://www.msi.com/index.php .

33


.
.

I/O

.

*
.
*
.

34

MS-7641

LAN
RS
VGA

CS

USB 2.0

SS
()

AM3+ CPU
. ,
/ CPU .

AM3+ CPU .

.

35

 CPU
. CPU .
.

. 90
.

2.

CPU .
. CPU
.

3.

CPU ,
.

.

4.

CPU
. CPU
, CPU
CPU
.

5.

.
.

6.

.
.

7.

8.

CPU CPU
.

,
.

36

MS-7641

. , .
2.

DIMM .
DIMM .
DIMM
. DIMM
.

3.

DIMM
.

* , DIMM
.
* , DIMM1 .

37

ATX 24 : JPWR1
ATX 24 . ATX 24
,
, .
.

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4 : JPWR2
4 CPU .

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

ATX
.
ATA : SATA1 ~ 6
ATA .
ATA .

ATA 90 . ,
.

38

MS-7641
: CPUFAN, SYSFAN1
+12V .
, +12V ,
GND .
, CPU
.

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

r
o

.+
8
.6 .+
4 .
2

zer
r

.N

ch

it

1
S

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz
Spe

ake
P

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2
JFP1

SYSFAN1
CPUFAN

: JFP1, JFP2
LED . JFP1
Intel Front Panel I/O Connectivity Design Guide .

: JLPT1 ()
.
, (EPP) (ECP)
.

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

39

 : JCOM1
16550A 16 FIFO .
.
in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

: JAUD1
, Intel
Front Panel I/O Connectivity Design Guide .
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB : JUSB1, JUSB2

Intel I/O Connectivity Design Guide USB HDD,
, MP3 , , USB
.
d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

40

MS-7641
TPM : JTPM1
TPM(Trusted Platform Module) .
TPM .

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

: JCI1
. ,
.
. , BIOS .

d
n
u RU
ro T
.G IN
2 .C
1

CMOS : JBAT1

CMOS RAM . CMOS RAM ,
OS . ,
.

JBAT1

1-2 CMOS .
. CMOS .
.

41

USB : JUSB_PW1, JUSB_PW2

VCC5 5VSB USB .
USB 5VSB .

JUSB_PW1

( USB
2.0 )
USB
VCC5

USB
5VSB

JUSB_PW2
( USB
)

USB
VCC5

USB
5VSB

5VSB 2A
.

42

MS-7641
PCIE
PCIE PCIE .

PCIE x16 .

PCIE x1 .

PCI
PCI LAN , SCSI , USB PCI
.

.
, BIOS
.
PCI
Interrupt request line IRQ I-R-Q ,
. PCI IRQ
PCI .

PCI 1

INT E#

INT F#

INT G#

INT H#

43

BIOS
POST(Power On Self Test) .
, <DEL> .
Press DEL to enter SETUP
,
RESET . <Ctrl>, <Alt> <Delete>
.

Standard CMOS Features

, .
Advanced BIOS Features
.
Integrated Peripherals
.
Power Management Setup
.
H/W Monitor
CPU , .
Green Power
.
BIOS Setting Password
BIOS .

44

MS-7641
Cell Menu
/ .
M-Flash
USB BIOS .
Overclocking Profile
BIOS CMOS() .
Load Fail-Safe Defaults
BIOS
.
Load Optimized Defaults
BIOS
.
Save & Exit Setup
CMOS .
Exit Without Saving
.

45

Current CPU/ DRAM/ CPU-NB Frequency

CPU/ DRAM/ CPU-NB . ( ).
CPU Specifications
<Enter> . CPU
.
CPU Technology Support
<Enter> . CPU
.
CPU Feature
<Enter> .
AMD CoolnQuiet
CoolnQuiet CPU
.

46

MS-7641
C1E Support
CPU .
, .
SVM Support
AMD SVM (Secure Virtual Machine) /
.
AMD CoolnQuiet
CoolnQuiet CPU
.

CoolnQuiet ,
.
* BIOS AMD CoolnQuiet Enabled .
* Windows [Start]->[Settings]->[Control Panel]->[Power Options]
. [ ]
.
C1E Support
CPU .
, .
Adjust CPU FSB Frequency (MHz)
CPU Front Side Bus clock (in MHz)
.
OC Stepping
Adjust CPU FSB Frequency (MHz)
. .
.
Start OC Stepping From (MHz)
.
. Adjust CPU FSB Frequency (MHz) .
OC Step
FSB .
OC Step Count Timer
.
Adjust CPU Ratio
CPU () .
.
Adjusted CPU Frequency (MHz)
CPU . ( ).

47

Adjust CPU-NB Ratio

CPU-NB .
Adjusted CPU-NB Frequency (MHz)
CPU-NB . ( ).
Unlock CPU Core
, [Enabled]
[Manual] .
Advanced Clock Calibration
. [Auto] CPU
. .
CPU Core Control
CPU . [Auto] CPU
. [Manual] CPU
/ .
Core X
X /.
OC Genie Lite
[Enabled] FSB
.
.
Memory-Z
<Enter> .
DIMM Memory SPD Information
<Enter> .
.
Advance DRAM Configuration
<Enter> .
DRAM Timing Mode
DRAM SPD( ) EEPROM DRAM
. [Auto] SPD BIOS
DRAM " DRAM "
. [Manual] DRAM
" DRAM " .
FSB/DRAM Ratio
FSB/ DRAM .
Adjusted DRAM Frequency (MHz)
. ( ).
HT Link Control
<Enter> .

48

MS-7641
HT Incoming/ Outgoing Link Width
. [Auto]
HT .
HT Link Speed
. [Auto]
HT .
Adjusted HT Link Frequency (MHz)
HT . ( ).
Auto Disable DRAM/PCI Frequency
[Enabled] DRAM/ PCI (
) (EMI) .
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
CPU, .
Spread Spectrum
()
. EMI
. EMI
. EMI
EMI .


.

* EMI [Disabled]
. EMI EMI
.
* EMI .
EMI .
*

.

49

Load Optimized Defaults

.

50

MS-7641

Franais
Pour commencer
Flicitations, vous venez daqurir une carte mre Micro-ATX 760GM-P24 (FX)/
760GM-P22 (FX)/ 760GM-P21 (FX) (MS-7641 v3.x). Les sries 760GM-P24 (FX)/
760GM-P22 (FX)/ 760GM-P21 (FX) sont bases sur les puces AMD 760G &
SB710 offrant un systme trs performant. La carte fonctionne avec les processeurs AMD avancs dans le paquet AM3+, les sries 760GM-P24 (FX)/ 760GMP22 (FX)/ 760GM-P21 (FX) sont trs performanantes et offrant une solution adapte tant aux professionnels quaux particuliers.
Schma
Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JTPM1

JUSB1

JUSB2

SATA6

JUSB_PW2

SATA5

JCOM 1

SATA3

JLPT1(optional)

SATA1

JFP2
JAUD1

SATA2

AMD
SB710
PCI1

(optional)
SATA 4

PCI_E2

JFP1

51

SPCIFICATIONS
Processeurs
AMD FX / Phenom II / Athlon II / Sempron processeurs dans le paquet
AM3+.
(Pour plus dinformation sur le CPU, veuillez visiter
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0, supporte jusqu 5.2 GT/s
Jeu de puces
North Bridge : puces AMD 760G
South Bridge : puces AMD SB710
Mmoire
DDR3 800/ 1066/ 1333 SDRAM (total 16GB Max)
2 DDR3 DIMMs (240pin / 1.5V)
(Pour plus dinformation sur les composants compatibles, veuillez visiter
http://www.msi.com/service/test-report/)
LAN
Supporte LAN 10/100/1000 Fast Ethernet par Realtek 8111E (760GM-P24
(FX)/ 760GM-P22 (FX))
Supporte LAN 10/100 Fast Ethernet par Realtek 8105E (760GM-P21 (FX))
Audio
Puces intgres par Realtek ALC892 (760GM-P24 (FX))
Puces intgres par Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
Supporte 7.1 canaux audio out
Conforme aux spcifications Azalia 1.0
SATA
4 ports SATA 3Gb/s par AMD SB710 (760GM-P21 (FX))
6 ports SATA 3Gb/s par AMD SB710 (760GM-P24 (FX)/ 760GM-P22 (FX))
RAID
SATA 1~4 supportent le mode RAID 0/ 1/ 10 ou JBOD par AMD SB710
(760GM-P21 (FX))
SATA 1~6 supportent le mode RAID 0/ 1/ 10 ou JBOD par AMD SB710
(760GM-P24 (FX)/ 760GM-P22 (FX))
Connecteurs
Panneau arrire I/O
1 port souris PS/2
1 port clavier PS/2
1 port VGA
6 ports USB 2.0
1 prise LAN
6 prises audio flexibles (760GM-P24 (FX))
3 prises audio flexibles (760GM-P22 (FX)/ 760GM-P21 (FX))
Connecteurs intgrs
2 connecteurs USB 2.0
1 connecteur audio avant

52

MS-7641

1 connecteur chssis Intrusion

1 connecteur de port srial
1 connecteur TPM

Emplacements
1 emplacement PCIE x16
1 emplacement PCIE x1
1 emplacement PCI, supporte lInterface bus PCI 3.3V/ 5V
Dimension
Micro-ATX (244mm x 209mm)
Montage
6 trous de montage

Si vous dsirez acheter des accessoires et vous avez besoin de numro des
pices, vous pouvez chercher sur la page website et trouver les dtails sur notre
adresse ci-dessous
http://www.msi.com/index.php

53

Trous tarauds
Quand vous installez la carte mre, il faut dposer la carte dans le chssis en
bonne position. La situation des trous tarauds sont montre dans la figure cidessous.

Face vers larrire,

position pour la
protge Entr/ Sortie du chssis.

Trous tarauds
Veuillez vous rfrer la figure pour installer le support dans une position approprie sur le chssis et puis de fixer la carte travers les trous tarauds sur
le support.

Important
* Pour prvenir les endommages la carte mre, il est interdit de mettre toutes
sorte de contact entre le circuit et le chssis ou de mettre un support inutile sur
le chssis.
* Veuillez vous assurer quil ny a pas de composant en mtal mis dans la carte ou
le chssis qui entranerait un court circuit la cartre mre.

54

MS-7641

Panneau arrire
Le panneau arrire dispose les connecteurs suivants :

Souris

LAN
Ligne-In RS-Out
Port VGA

Ligne-Out CS-Out

Ports USB 2.0

Clavier

MIC SS-Out
(en option)

Installation du matriel
Intallation du CPU et le ventilateur pour AM3+
Quand vous installez votre CPU, assurez-vous que le CPU possde dun systme de refroidissement pour prvenir le surchauffe. Nanmoins, noubliez pas
dappliquer un compos de transfert thermique pour une meilleure dispersion de
chaleur.

La surface du CPU AM3+.

Noubliez pas dappliquer un compos
de transfert thermique pour une meilleure dispersion de chaleur.

La flche dor

55

Suivez les instructions ci-dessous pour installer le

CPU et le ventilateur correctement. Une mauvaise installation endommagera votre CPU et la carte mre.
.

Tirez le levier de ct de la douille. Assurez-vous

de le lever jusqu 90-degrs.

2.

Cherchez la flche dor du CPU. Elle doit dsigner comme montr dans le photot. Le CPU ne sy
installe que dans le position correcte.

3.

Si le CPU est correctement install, les pins sont

compltement intgrs dans la douille et ils sont
invisibles. Veuillez noter que toute fausse installation peut endommager en permanence votre
carte mre.

4.

Appuyez sur le CPU fermement dans la douille

et fermez le levier. Vue que le CPU a une tendance bouger lorsque le levier se ferme, il faut
le fermer en fixant le CPU avec la main pour quil
soit correctement et compltement intgr dans
la douille.

5.

Posez le ventilateur sur le mcanisme de rtention. Crochez un ct du clip dabord.

6.

Puis appuyez sur lautre ct du clip pour fixer le

ventilateur sur le haut du mcanisme de rtention. Installez le levier de fixe et levez-le.

7.

Fixez le levier.

8.

Attachez le cble du ventilateur du CPU au connecteur du ventilateur de CPU la carte mre.

Important
Quand vous dconnectez le crochet de scurit du verrou fix, il faut garder un
oeil sur vos doigts, parce quune fois que le crochet de scurit est dconnect du
verrou fix, le levier fix jaillira immdiatement.

56

MS-7641
Installation des Modules de Mmoire
. Le module de mmoire ne possde quune seule encoche au centre et quil
nest convenable que dans la correcte orientation.
2.

Insrez le module de mmoire verticalement dans le slot DIMM. Puis poussez-le l-dedans jusqu ce que le doigt dor sur le module de mmoire soit
profondment insr dans le slot DIMM. Le clip en plastique situ de chaque
ct du module va se fermer automatiquement. Vous ne pouvez presque pas
voir le doigt dor si le module de mmoire est correctement insr dans le
slot DIMM.

3.

Vrifiez manuellement que le module de mmoire soit bien insr par les clips
en plastiques situs de chaque ct du module.

Volt

Encoche

Important
* En mode Double-Canaux, assurez-vous que vous installez les modules de mmoire du mme type et de la mme densit dans des slots DIMM de canaux
diffrents.
* Pour lancer avec succs votre ordinateur, insrez tout dabord les modules de
mmoire DIMM1.

57

Connecteur dalimentation ATX 24-pin : JPWR1

Ce connecteur vous permet de connecter lalimentation ATX 24-pin. Pour cela assurez-vous que le connecteur est bien positionn dans le bon sens et que les pins
sont alignes. Abaissez alors lalimentation dnergie dans le connecteur.

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

Connecteur dalimentation ATX 4-pin : JPWR2

Ce connecteur dalimentation de 4-pin sert alimenter le CPU.

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

Important
Assurez-vous que tous les connecteurs sont relis lalimentation ATX pour assurer une stabilit de la carte mre.
Connecteur Srial ATA : SATA1 ~ 6
Ce connecteur est un port dInterface de haute vitesse Srial ATA. Chaque connecteur peut se connecter un dispositif Srial ATA.

Important
Veuillez ne pas tordre le cble Srial ATA 90-degrs. Cela pourrait lendommager
et entrainer la perte de donnes lors des phases de transfert de celles-ci.

58

MS-7641
Connecteurs dalimentation du ventilateur : CPUFAN, SYSFAN1
Les connecteurs dalimentation du systme de refroidissement suportent un systme de refroidissement de +12V. Lors de la connexion du cble, assurez-vous
que le fil soit positif et connect au +12V; le cble noir connect au GND. Si la
carte mre possde un chipset System Hardware Monitor intgr, vous devez
utiliser un ventilateur ayant ces caractristiques si bous voulez contrler le ventilateur du CPU.
CPUFAN

SYSFAN1

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

Connecteurs Panneau avant : JFP1, JFP2

Ces connecteurs sont pour des connexion lectriques aux cummutateurs et LEDs.
Le JFP1 est compatible ave Intel Front Panel I/O Connectivity Design Guide.

P
o

Spe

w
e
r
0

L
E
D

zer

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz

.+
8
.6 .+
4 .
2

.N

ch

it

JFP1

ake

Connecteur de port parallle : JLPT1 (optionnel)

Ce connecteur sert connecter un support de port parallle optionnel. Le port
parallle est un port dimprimante standard qui supporte les modes Enhanced
Parallel Port (EPP) et Extended Capabilities Parallel Port (ECP).

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

59

Connecteur de port srial : JCOM1

Ce connecteur est un port de communications de haute vitesse de 16550A, qui
envoie/ reoit 16 bytes FIFOs. Vous pouvez attacher un priphrique srial.
in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

Connecteur audio avant : JAUD1

Ce connecteur vous permet de connecter un audio en panneau avant. Il est compatible avec Intel Front Panel I/O Connectivity Design Guide.
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

Connecteur USB avant : JUSB1, JUSB2

Ce connecteur, compatible avec Intel I/O Connectivity Design Guide, est idal
pour connecter les USB priphrique dInterface de haute vitesse tel que USB
HDD, camra numrique, lecteur MP3, imprimants modems et etc.
d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

60

MS-7641
Connecteur de Module TPM : JTPM1
Ce connecteur est reli un module TPM (Trusted Platform Module). Veuillez
vous rfrer au manuel de TPM plate-forme de scurit pour plus de dtails et
dutilisations.

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

Connecteur chssis Intrusion : JCI1

Ce connecteur est connect un cble chssis Instrusion switch. Si le chssis
est ouvert, linterrupteur en informera le systme, qui enregistrera ce statut et
affichera un cran dalerte. Pour effacer ce message dalerte, vous devez entrer
dans le BIOS et dsactiver le record.

d
n
u RU
ro T
.G IN
2 .C
1

Cavalier deffacement CMOS : JBAT1

Le CMOS RAM intgr reoit une alimentation dune batterie externe qui permet de garder les donnes de configuration du systme. Avec le CMOS RAM,
le systme peut automatiquement amorcer OS chaque fois quil soit allum. Si
vous voulez effacer la configuration du systme, rglez le cavalier pour effacer
les donnes.

JBAT1

Conserver les donnes

Effacer les donnes

Important
Vous pouvez effacer le CMOS en positionnant les 1-2 pin orsque le PC est dsactiv, puis ouvrez-le. Evitez surtout deffacer le CMOS lorsque le PC est allum,
cela endommagera la carte mre.

61

Cavalier dalimentation USB : JUSB_PW1, JUSB_PW2

Ces cavaliers servent choisir les ports USB aliments par VCC5 ou 5VSB. Rglez-le en 5VSB si vous voulez que les ports USB fournissent une alimentation
pour le mode attente.

JUSB_PW1

(Pour ports
USB 2.0
arrire)

Garder
lalimentation
USB en VCC5

Garder
lalimentation
USB en 5VSB

JUSB_PW2
(pour connecteurs USB
intgrs)

Garder
lalimentation
USB en VCC5

Garder
lalimentation
USB en 5VSB

Important
Si vous mettez le cavaliver en 5VSB, lalimentation doit tre capable de fournir le
courant de 2A au moins .

62

MS-7641
Emplacement PCIE
Lemplacement PCIE supporte la carte dextension dInterface PCIE.

Emplacement PCIE x16.

Emplacement PCIE x1.

Emplacement PCI
Le slot PCI supporte la carte LAN, la carte SCSI, la carte USB, et dautre cartes
ajoutes qui sont compatibles avec les spcifications de PCI.

Important
Lorsque vous ajoutez ou retirez une carte dextension, assurez-vous que le PC
nest pas reli au secteur. Lisez le documentation pour faire les configurations
ncessaires du matriel ou du logiciel de la carte dextension, tels que cavaliers,
commutateurs ou la configuration du BIOS.
Chemins de revendication dinterruption de PCI
IRQ est labrviation de interrupt request line. Les IRQ sont des lignes de matriel sur lesquelles les priphriques peuvent mettre des signaux dinterruption au
microprocesseur. Les pins de PCI IRQ sont typiquement connects aux pins de
bus PCI comme suivant :
Ordre
Emplacement
PCI 1

INT E#

INT F#

INT G#

INT H#

63

Rglage bios
Lorsque le PC est dmarr, le processeur de POST (Power On Self Test) se met
en route. Quand le message ci-dessous appat lcran, appuyez sur <DEL> pour
accder au Setup (Rglage).
Press DEL to enter SETUP
(Appuyez sur DEL pour accder au SETUP)
Si le message disparat avant que vous nayez appuy sur la touche, redmarrez
le PC avec laide du bouton RESET. Vous pouvez aussi le redmarrer en utilisant
smultanment la combinaison des touches <Ctrl>, <Alt>, and <Delete>.
Page Principale

Standard CMOS Features

Utilisez ce menu pour paramtrer des lments standards du BIOS tel que
lheure, la date etc.
Advanced BIOS Features
Utilisez ce menu pour rgler les articles des fonctions avances spcifiques.
Integrated Peripherals
Utilisez ce menu pour spcifier vos rglages des priphriques intgrs.
Power Management Setup
Utilisez ce menu pour spcifier vos rglages pour la gestion dalimentation.
H/W Monitor
Cette entre montre les statuts du CPU, du ventilateur, et de lalarme du systme.

64

MS-7641
Green Power
Utilisez ce menu pour spcifier la phase dalimentation.
BIOS Setting Password
Utilisez ce menu pour entrer un mot de passe pour le BIOS.
Cell Menu
Utilisez ce menu pour spcifier votre configuration pour le contrleur de frquence/
tension.
M-Flash
Utilisez ce menu pour lire / flash le BIOS du priphrique de mdia USB.
Overclocking Profile
Utilisez ce menu pour conserver/ charger vos rglages / de CMOS pour le
BIOS.
Load Fail-Safe Defaults
Utilisez ce menu pour charger les valeurs par dfaut du BIOS, les rglages de la
manufacture pour lopration du systme.
Load Optimized Defaults
Utilisez ce menu pour charger les rglages par dfaut de la manufacture dans le
BIOS pour meilleure performance opration.
Save & Exit Setup
Rglage denregistrer les modifications CMOS et de quitter.
Exit Without Saving
Rglage dabandonner les modifications et de quitter.

65

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

Ce menu montre la frquence du CPU/ DRAM/ CPU-NB. Lecture uniquement.
CPU Specifications
Appuyez sur <Enter> pour entrer dans le sous-menu, qui montre linformation du
CPU install.
CPU Technology Support
Appuyez <Enter> pour entrer dans le sous-menu. Ce sub-menu montre les
technologies supportes par le CPU install.
CPU Feature
Appuyez <Enter> pour entrer dans le sous-menu.
AMD CoolnQuiet
Cette Technologie CoolnQuiet peut effectivement et dynapiquement diminuer
la vitesse du CPU et la consommation dalimentation.

66

MS-7641
C1E Support
Activer cet article pour lire la consommation dalimentation du CPU lors de
larrt. Pas tous les processeurs supportent Enhanced Halt state (C1E).
SVM Support
Ce menu vous permet dactiver/ dsactiver AMD SVM (Secure Virtual Machine)
Technologie.
AMD CoolnQuiet
Cette Technologie CoolnQuiet peut effectivement et dynapiquement diminuer la
vitesse du CPU et la consommation dalimentation.

Important
Afin dassurer que la fonction CoolnQuiet est active et quelle marchera correctement il est ncessaire de confirmer doublement que :
* Fonctionnez les rglages du BIOS, choisissez Cell Menu. Sous Cell Menu, trouvez AMD CoolnQuiet, mettez celui-l en Enabled.
* Entrez dans Windows, choisissez [Start]-> [Settings]-> [Control Panel]-> [Power
Options]. Entrez dans Power Options Properties, et choisissez Minimal Power
Management sous Power schemes.
C1E Support
Activer cet article pour lire la consommation dalimentation du CPU lors de larrt.
Pas tous les processeurs supportent Enhanced Halt state (C1E).
Adjust CPU FSB Frequency (MHz)
Cet article vous permet dajuster la frquence du FSB du CPU (en MHz).
OC Stepping
Cet article est activ aprs que vous rgliez la frquence doverclocking dans le
Adjust CPU FSB Frequency (MHz). Et les articles suivants apparaissent. Cet
article aide le systme doverclocker tape par tape aprs linitialisation du systme.
Start OC Stepping From (MHz)
Cet article sert rgler lhorloge de base initial. Le systme dmarre avec
lhorloge de base initial, et commence overclocker de lhorloge de base initial jusqu celui que vous rglez dans le Adjust CPU FSB Frequency (MHz)
tape par tape.
OC Step
Cet article rgle la quantit dtapes pour loverclocking dhorloge de base.
OC Step Count Timer
Cet article sert rgler la marge suffisant pour chaque tape.
Adjust CPU Ratio
Cet article vous permet dajuster le multiplieur dhorloge du CPU (ratio). Il est
disponible seulement quand le processeur supporte la fonction.
Adjusted CPU Frequency (MHz)
Il montre la frquence ajuste du CPU. Lecture uniquement.

67

Adjust CPU-NB Ratio

Cet article sert ajuster le ratio CPU-NB.
Adjusted CPU-NB Frequency (MHz)
Il montre la frquence ajuste du CPU-NB. Lecture uniquement.
Unlock CPU Core
Cet article vous permet de dverrouiller les coeurs ajouts. Vous pouvez le mettre
en [Enabled] et puis mettez Advanced Clock Calibration en [Auto] pour pouvoir
activer les coeurs du processeurs.
Advanced Clock Calibration
Cet article est utilis pour loverclocking. La mise en [Auto] vous permet de rgler
le CPU Ratio plus haut. Il est disponible seulement quand le processeur supporte
la fonction.
CPU Core Control
Cet article sert contrler le nombre de coeurs du CPU. Lorsquil est mis en
[Auto], le CPU fonctionne avec les coeurs de nombre par dfaut et lorsquil est mis
en [Manual], vous pouvez activer/ dsactiver des coeurs du CPU spcifiques.
Core X
Ces menus servent activer/ dsactiver le coeur X.
OC Genie Lite
La mise en [Enabled] de cet article permet au systme de dtecter lhorloge du
FSB maximum et doverclocker automatiquement. Si loverclocking choue, vous
pouvez essayer une horloge du FSB moins haut pour y russir.
Memory-Z
Appuyez sur <Enter> pour entrer dans le sous-menu.
DIMM Memory SPD Information
Appuyez sur <Enter> pour entrer dans le sous-menu. Ce sous-menu affiche
linformation de la mmoire supporte.
Advance DRAM Configuration
Appuyez sur <Enter> pour entrer dans le sous-menu.
DRAM Timing Mode
Le choix du DRAM timing est contrl par SPD (Serial Presence Detect) EEPROM sur le module DRAM. La mise en [Auto] active le DRAM timings et
le sous-menu suivant Advance DRAM Configuration qui seradtermin par
le BIOS bas sur les configurations du SPD. La mise en [Manual] vous permet de configurer le DRAM timings et le sous-menu suivant Advance DRAM
Configuration manuellement.
FSB/DRAM Ratio
Cet article vous permet dajuster le ratio du FSB/ DRAM.
Adjusted DRAM Frequency (MHz)
Il montre la frquence ajuste de la mmoire. Lecture uniquement.
HT Link Control
Appuyez sur <Enter> pour entrer dans le sous-menu.

68

MS-7641
HT Incoming/ Outgoing Link Width
Ces articles vous permet de rgler le largeur du Hyper-Transport Link. Mettezle en [Auto], le systme dtectera automatiquement le largeur du HT link.
HT Link Speed
Cet article vous permet de rgler la vitesse du Hyper-Transport Link. Mettez-le en
[Auto], le systme dtectera automatiquement la vitesse HT link.
Adjusted HT Link Frequency (MHz)
Il montre la frquence ajuste du HT Link. Lecture uniquement.
Auto Disable DRAM/PCI Frequency
Lorsque mis en [Enabled], le systme teindra les horloges des fentes vides de
PCI pour rduire au minimum linterface lectromagutique (EMI).
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
Ces articles servent ajuster la tension du CPU, de la mmoire et de la puce.
Spread Spectrum
Lorsque le gnrateur dhorloge de la carte mre fonctionne, les valeurs extrmes
(spikes) crent des interfrences lectromagntiques EMI (Electromagnetic Interference). La fonction Spread Spectrum rduit ces interfrences en rglant les impultions. Si vous navez pas de problme dEMI, laissez-le sur Disabled qui vous
permet davoir une stabilit du systme et des performances optimales. Dans le
cas contraire, choisissez Enabled pour la rduction EMI. Noubliez pas de dsactiver cette fonction si vous voulez faire de loverclocking, parce que la moindre
modification peut entrainer une acclration temporaire dhorloge et ainsi votre
processeur overclock se verrouillera.

Important
* Si vous navez pas de problme dEMI, laissez loption sur [Disable], ceci vous
permet davoir une stabilit du systme et des performances optimales. Dans le
cas contraire, choisissez Spread Spectrum pour rduire les EMI.
* Plus la valeur Spread Spectrum est importante, plus les EMI sont rduites, et le
systme devient moins stable. Pour la valeur Spread Spectrum la plus convenable, veuillez consulter le rglement EMI local.
* Noubliez pas de dsactiver la fonction Spread Spectrum si vous tes en train
doverclocker parce que mme un battement lger peut causer un accroissement temporaire de la vitesse de lhorloge qui verrouillera votre processeur
overclock.

69

Load Optimized Defaults

Vous pouvez charger les valeurs de dfaut fournites par la manufacture de carte
pour une performance stable.

70

MS-7641

DEUTSCH
eINLEITUNG
Danke, dass Sie das 760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) (MS7641 v3.x) Micro-ATX Mainboard gewhlt haben. Das 760GM-P24 (FX)/ 760GMP22 (FX)/ 760GM-P21 (FX) basiert auf dem AMD 760G & SB710 Chipsatz fr
optimalen Systemwirkungsgrad. Entworfen, um den hochentwickelten AMD
Prozessor fr Sockel AM3+ zu untersttzen, stellt das 760GM-P24 (FX)/ 760GMP22 (FX)/ 760GM-P21 (FX) Serie die ideale Lsung zum Aufbau eines professionellen Hochleistungsdesktopsystems dar.
Layout
Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JTPM1

JUSB1

JUSB2

SATA6

JUSB_PW2

SATA5

JCOM 1

SATA3

JLPT1(optional)

SATA1

JFP2
JAUD1

SATA2

AMD
SB710
PCI1

(optional)
SATA 4

PCI_E2

JFP1

71

SPEZIFIKATIONEN
Prozessoren
AMD FX / Phenom II / Athlon II / Sempron Prozessoren fr Sockel
AM3+.
(Weitere CPU Informationen finden Sie unter
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0, untersttzt bis zu 5,2 GT/s
Chipsatz
North-Bridge: AMD 760G Chipsatz
South-Bridge: AMD SB710 Chipsatz
Speicher
DDR3 800/ 1066/ 1333 SDRAM (gesamt max. 16GB)
2 DDR3 DIMMs (240 Pin / 1,5V)
(Weitere Informationen zu kompatiblen Speichermodulen finden Sie unter
http://www.msi.com/service/test-report/)
LAN
Untersttzt LAN 10/100/1000 Fast Ethernet ber Realtek 8111E (760GMP24 (FX)/ 760GM-P22 (FX))
Untersttzt LAN 10/100 Fast Ethernet ber Realtek 8105E (760GM-P21
(FX))
Audio
Onboard Soundchip Realtek ALC892 (760GM-P24 (FX))
Onboard Soundchip Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
7,1-Kanal Audio-Ausgang
Erfllt die Azalia Spezifikationen
SATA
4 SATA 3Gb/s Anschlsse ber AMD SB710 (760GM-P21 (FX))
6 SATA 3Gb/s Anschlsse ber AMD SB710 (760GM-P24 (FX)/ 760GM-P22
(FX))
RAID
SATA 1~4 untersttzen die Modi RAID 0/ 1/ 10 oder JBOD ber AMD SB710
(760GM-P21 (FX))
SATA 1~6 untersttzen die Modi RAID 0/ 1/ 10 oder JBOD ber AMD SB710
(760GM-P24 (FX)/ 760GM-P22 (FX))
Anschlsse
Hintere Ein-/ und Ausgnge
1 PS/2 Mausanschluss
1 PS/2 Tastaturanschluss
1 VGA Anschluss
6 USB 2.0 Anschlsse
1 LAN Anschluss
6 Audiobuchsen (760GM-P24 (FX))
3 Audiobuchsen (760GM-P22 (FX)/ 760GM-P21 (FX))

72

MS-7641
Onboard Stiftleiste/ Anschlsse
2 USB 2.0 Stiftleisten
1 Audio Stiftleiste fr Gehuse Audio Ein-/ Ausgnge
1 Gehusekontaktschalter
1 serieller Anschluss
1 TPM Schnittstelle
Steckpltze
1 PCIE x16-Steckplatz
1 PCIE x1-Steckplatz
1 PCI-Steckplatz, untersttzt 3,3V/ 5V PCI Bus Interface
Form Faktor
Micro-ATX (244mm x 209mm)
Montage
6 Montagebohrungen

Wenn Sie fr Bestellungen von Zubehr Teilenummern bentigen, finden Sie

diese auf unserer Produktseite unter http://www.msi.com/index.php

73

SCHRAUBENLCHER
Wenn Sie das Mainboard zu installieren, mssen Sie das Mainboard in das Chassis in der korrekten Richtung setzen. Die Standorte von Schraubenlchern auf
dem Mainboard sind wie nachfolgend gezeigt.

Die Seite muss

nach hinten, die
Position fr die
E/A-Abschirmung
des Chassis.

Schraubenlcher
Verweisen Sie das obige Bild, um Abstandshalter in den entsprechenden Orten
auf Chassis installieren und dann Schraube durch das Mainboard Schraubenlcher in den Abstandshaltern.

wichtig
* Zur Verhtung von Schden auf dem Mainboard, jeglichen Kontakt zwischen
dem Mainboard Stromkreis und dem Chassis oder unntige Abstandshalter
montiert auf dem Chassis ist verboten.
* Bitte stellen Sie sicher, dass keine metallischen Komponenten auf dem Mainboard ausgesetzt ist oder innerhalb des Chassis, Kurzschluss des Mainboards
verursachen kann.

74

MS-7641

Hinteres Anschlusspanel
Das hintere Anschlusspanel verfgt ber folgende Anschlsse:

Maus

LAN
Line-In RS-Out
VGA Anschluss

Line-Out CS-Out

USB 2.0 Anschlsse

Tastatur

MIC SS-Out
(optional)

HARDWARE SETUP
CPU & Khler Einbau fr Sockel AM3+
Wenn Sie die CPU einbauen, stellen Sie bitte sicher, dass Sie auf der CPU einen
Khler anbringen, um berhitzung zu vermeiden. Vergessen Sie nicht, etwas
Siliziumwrmeleitpaste auf die CPU aufzutragen, bevor Sie den Prozessorkhler
installieren, um eine Ableitung der Hitze zu erzielen.
Die Obserseite der AM3+ CPU.
Vergessen Sie nicht, etwas Siliziumwrmeleitpaste auf die CPU auf zut
ragen, um eine Ableitung der Hitze
zu erzielen.

Der goldenen Pfeil

75

Folgen Sie den Schritten unten, um die CPU und den

Khler ordnungsgem zu installieren. Ein fehlerhafter Einbau fhrt zu Schden an der CPU und dem
Mainboard.
.

Ziehen Sie den Hebel leicht seitlich vom Sockel

weg, heben Sie ihn danach bis zu einem Winkel
von ca. 90 an.

2.

Machen Sie den goldenen Pfeil auf der CPU ausfindig. Die CPU passt nur in der korrekten Ausrichtung. Setzen Sie die CPU in den Sockel.

3.

Ist die CPU korrekt installiert, sollten die Pins

an der Unterseite vollstndig versenkt und nicht
mehr sichtbar sein. Beachten Sie bitte, dass jede
Abweichung von der richtigen Vorgehensweise
beim Einbau Ihr Mainboard dauerhaft beschdigen kann.

4.

Drcken Sie die CPU fest in den Sockel und

drcken Sie den Hebel wieder nach unten bis in
seine Ursprungsstellung. Da die CPU whrend
des Schlieens des Hebels dazu neigt, sich zu
bewegen, sichern Sie diese bitte whrend des
Vorgangs durch permanenten Fingerdruck von
oben, um sicherzustellen, dass die CPU richtig
und vollstndig im Sockel sitzt.

5.

Setzen Sie den Khler auf die Khlerhalterung

und hacken Sie zuerst ein Ende des Khlers an
dem Modul fest.

6.

Dann drcken Sie das andere Ende des Bgels herunter, um den Khler auf
der Khlerhalterung zu fixieren. Anschlieend ziehen Sie den Sicherungshebel an der Seite fest.

7.

Drcken Sie den Sicherungshebel.

8.

Verbinden Sie das Stromkabel des CPU Lfters mit dem Anschluss auf dem
Mainboard.

WICHtIG
Es besteht Verletzungsgefahr, wenn Sie den Sicherungshaken vom Sicherungsbolzen trennen. Sobald der Sicher-ungshaken gelst wird, schnellt der Sicherungshaken sofort zurck.

76

MS-7641
Vorgehensweise beim Einbau von Speicher Modulen
. Die Speichermodule haben nur eine Kerbe in der Mitte des Moduls. Sie passen nur in einer Richtung in den Sockel.
2.

Stecken Sie das Arbeitsspeichermodul senkrecht in den DIMM-Steckplatz

ein, dann drcken Sie ihn hinein, bis die goldenen Kontakte tief im Sockel
sitzen. Der Kunststoffbgel an jedem Ende des DIMM-Steckplatzes schnappt
automatisch ein, wenn das Arbeitsspeichermodul richtig eingesetzt ist. Die
goldenen Kontakte sind kaum zu sehen, wenn das Arbeitsspeichermodul richtig im DIMM-Steckplatz sitzt.

3.

Prfen Sie von Hand, ob das Arbeitsspeichermodul von den seitlichen Bgeln
am DIMM-Steckplatz richtig gehalten wird.

Volt

Kerbe

WICHtIG
* Stellen Sie im Zweikanalbetrieb bitte sicher, dass Sie Module des gleichen Typs
und identischer Speicherdichte in den DIMM Slots unterschiedlicher Kanle
verwenden.
* Um einen sicheren Systemstart zu gewhrleisten, bestcken Sie immer DIMM
1 zuerst.

77

ATX 24-poliger Stromanschluss: JPWR1

Hier knnen Sie ein ATX 24-Pin Netzteil anschlieen. Wenn Sie die Verbindung
herstellen, stellen Sie sicher, dass der Stecker in der korrekten Ausrichtung eingesteckt wird und die Pins ausgerichtet sind. Drcken Sie dann den Netzteilstecker fest in den Steckersockel.

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4-poliger Stromanschluss: JPWR2

Dieser 4-poliger Stromanschluss wird verwendet, um die CPU mit Strom zu versorgen.

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

wichtig
Stellen Sie die Verbindung aller drei Anschlsse mit einem angemessenem ATX
Netzteil sicher, um den stabilen Betrieb des Mainboards sicher zu stellen.
Serial ATA Anschluss: SATA1 ~ 6
Der Anschluss ist ein hoch-Geschwindigkeit Schnittstelle der Serial ATA. Jeder
Anschluss kann eine Serial ATA Anschluss angeschlossen werden.

WICHtIG
Bitte falten Sie das Serial ATA Kabel nicht in einem Winkel von 90 Grad. da dies
zu Datenverlusten whrend der Datenbertragung fhrt.

78

MS-7641
Stromanschlsse fr Lfter: CPUFAN, SYSFAN1
Die Netzteillfter Anschlsse untersttzen aktive Systemlfter mit +12V. Wenn
Sie den Stecker mit dem Anschluss verbinden, sollten Sie immer darauf achten,
dass der rote Draht der positive Pol ist und mit +12V verbunden werden sollte,
der schwarze Draht ist der Erdkontakt und sollte mit GND verbunden werden.
Besitzt Ihr Mainboard einen Chipsatz zur berwachung der Systemhardware und
Steuerung der Lfter, dann brauchen Sie einen speziellen Lfter mit Tacho, um
diese Funktion zu nutzen.
CPUFAN

SYSFAN1

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

Frontpanel Anschlsse: JFP1, JFP2

Die Anschlsse fr das Frontpanel dienen zum Anschluss der Schalter und LEDs
des Frontpaneels. JFP1 erfllt die Anforderungen des Intel Front Panel I/O Connectivity Design Guide.

P
o

Spe

w
e
r
0

L
E
D

zer

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz

.+
8
.6 .+
4 .
2

.N

ch

it

JFP1

ake

Parallele Schnittstelle: JLPT1 (optional)

Die folgende Stiftleiste untersttzt den Betrieb von Endgerten (Parallele Schnittstelle) ber ein optional erhltliches Bracket. Der Anschluss (Parallel Port) untersttzt die Betriebsmodi EPP (Enhanced Parallel Port) und ECP (Extended
Capabilities Port).

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

79

Serieller Anschluss: JCOM1

Es handelt sich um eine 16550A Kommunikationsschnittstelle, die 16 Bytes FIFOs
senden/empfngt. Hier lsst sich eine serielle Maus oder andere serielle Gerte
direkt anschlieen.
in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

Audioanschluss des Frontpanels: JAUD1

Der Audio Frontanschluss ermglicht den Anschluss von Audioein- und -ausgngen eines Frontpanels. Der Anschluss entspricht den Richtlinien des Intel Front
Panel I/O Connectivity Design Guide.
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB Frontanschluss: JUSB1, JUSB2

Der Anschluss entspricht den Richtlinien des Intel Front Panel I/O Connectivity
Design Guide, und ist bestens geeignet, Hochgeschwindigkeits- USB- Peripheriegerte anzuschlieen, wie z.B. USB Festplattenlaufwerke, Digitalkameras,
MP3-Player, Drucker, Modems und hnliches.
d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

80

MS-7641
TPM Modul Anschluss: JTPM1
Dieser Anschluss wird fr das optionale TPM Modul (Trusted Platform Module)
verwendt. Weitere Informationen ber den Einsatz des optionalen TPM Modules
entnehmen Sie bitte dem TPM Plattform Handbuch.

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

Gehusekontaktanschluss: JCI1
Dieser Anschluss wird mit einem Kontaktschalter verbunden. Wird das Gehuse
geffnet, wird der Schalter geschlossen und das System zeichnet dies auf und gibt
auf dem Bildschirm eine Warnung aus. Um die Warnmeldung zu lschen, muss
das BIOS aufgerufen und die Aufzeichnung gelscht werden.

d
n
u RU
ro T
.G IN
2 .C
1

Steckbrcke zur CMOS- Lschung: JBAT1

Der Onboard CMOS Speicher (RAM) wird ber eine zustzliche Betterie mit Strom
versorgt, um die Daten der Systemkonfiguration zu speichern. Er ermglicht es
dem Betriebssystem, mit jedem Einschalten automatisch hochzufahren. Wenn Sie
die Systemkonfiguration lschen wollen, mssen Sie die Steckbrcke fr kurze
Zeit umsetzen (Lschen Daten).

JBAT1

Halten Daten

Lschen Daten

WICHtIG
Sie knnen den CMOS lschen, indem Sie die Pins 1-2 verbinden, whrend das
System ausgeschaltet ist und entfernen Sie es dann. Lschen Sie den CMOS
nicht, solange das System angeschaltet ist, dies wrde das Mainboard beschdigen.

81

Steckbrcke zur USB-Stromversorgung: JUSB_PW1, JUSB_PW2

VCC5 oder 5VSB USB-Stromversorgung whlbar ber Steckbrcke. Stellen
Sie 5VSB ein, wenn Sie die USB-Ports mit Strom im Standby-Modus versorgen
mchten.

JUSB_PW1

(fr hinteren
USB 2.0
Anschlsse)

Halten USB
Stromversorgung
mit VCC5

Halten USB
Stromversorgung
mit 5VSB

JUSB_PW2
(fr bordeigene
USB Anschlsse)

Halten USB
Stromversorgung
mit VCC5

Halten USB
Stromversorgung
mit 5VSB

WICHtIG
Wenn Sie die Steckbrcke auf 5VSB umsetzen, muss die Stromversorgung eine
Stromdichte von mindestens 2 Ampere bereitstellen.

82

MS-7641
PCIE-Steckplatz
Der PCIE-Steckplatz untersttzt eine Erweiterungskarte mit der PCIE-Schnittstelle.

PCIE x16-Steckplatz.

PCIE x1-Steckplatz.

PCI-Steckplatz
Der PCI-Steckplatz kann LAN-Karten, SCSI-Karten, USB-Karten und sonstige Zusatzkarten aufnehmen, die mit den PCI-Spezifikationen konform sind.

WICHtIG
Achten Sie darauf, dass Sie zuerst das Netzkabel aus der Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder entfernen. Denken Sie
bitte auch daran die Dokumentation der Erweiterungskarte zu lesen, um notwendige Hardware- oder Softwareeinstellungen fr die Erweiterungskarte wie z.B.
Jumper-, Schalter- oder BIOS-Einstellungen vorzunehmen.
PCI-Unterbrechungsanforderungs-Routing
Eine IRQ (Interrupt Request; Unterbrechungsanforderung)-Leitung ist eine Hardwareleitung, ber die ein Gert Unterbrechungssignale zu dem Mikroprozessor
schicken kann. Die PCI IRQ-Pole werden in der Regel mit dem PCI-Bus-Polen
wie folgt verbunden:
Folge
Steckplatz
PCI 1

INT E#

INT F#

INT G#

INT H#

83

BIOS Setup
Nach dem Einschalten beginnt der Computer den POST (Power On Self Test
Selbstberprfung nach Anschalten). Sobald die Meldung unten erscheint
drcken Sie die Taste <DEL> , um das Setup aufzurufen.
Press DEL to enter SETUP
(ENTF drcken, um das Einstellungsprogramm zu ffnen)
Sollten Sie die Taste nicht rechtzeitig gedrckt haben und somit den Start des
BIOS verpasst haben, starten Sie bitte Ihr System neu. Entweder drcken Sie
dazu den Power On / Anschalter oder den Reset Knopf. Alternativ bettigen
Sie die Tastenkombination <Ctrl>, <Alt> und <Delete>, um einen Neustart zu erzwingen.
Main Page

Standard CMOS Features

In diesem Men knnen Sie die Basiskonfiguration Ihres Systems anpassen, so
z.B. Uhrzeit, Datum usw.
Advanced BIOS Features
Verwenden Sie diesen Menpunkt, um eigene weitergehende Einstellungen an
Ihrem System vorzunehmen.
Integrated Peripherals
Verwenden Sie dieses Men, um die Einstellungen fr in das Board integrierte
Peripheriegerte vorzunehmen.
Power Management Setup
Verwenden Sie dieses Men, um die Einstellungen fr die Stromsparfunktionen
vorzunehmen.

84

MS-7641
H/W Monitor
Dieser Eintrag zeigt den Status der CPU, des Lfters und allgemeine Warnungen
zum generellen Systemstatus.
Green Power
Verwenden Sie dieses Men um Einstellungen der Stromversorgung vorzunehmen.
BIOS Setting Password
Verwenden Sie dieses Men, um das Kennwort fr das BIOS einzugeben.
Cell Menu
Hier knnen Sie Einstellungen zu Frequenzen/Spannungen und bertaktung
vornehmen.
M-Flash
In diesem Men knnen Sie das BIOS vom Speicher-Antrieb abtasten/ aufblinken
(nur FAT/ FAT32 Format).
Overclocking Profile
Abspeichern/ laden die Einstellungen im/ vom CMOS fr BIOS.
Load Fail-Safe Defaults
Hier knnen Sie die BIOS- Werkseinstellungen fr stabile Systemleistung laden.
Load Optimized Defaults
In diesem Men knnen Sie eine stabile, werkseitig gespeicherte Einstellung des
BIOS Speichers laden.
Save & Exit Setup
Abspeichern der BIOS-nderungen im CMOS und verlassen des BIOS.
Exit Without Saving
Verlassen des BIOS ohne Speicherung, vorgenommene nderungen verfallen..

85

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

Zeigt die derzeitige Takt der CPU, des Speichers und des CPU-NBs. Nur Anzeige
keine nderung mglich.
CPU Specifications
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen. Das Untermen zeigt die Information des verwendeten Prozessors an.
CPU Technology Support
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen. Das
Untermen zeigt die Technologien des verwendeten Prozessors an.
CPU Feature
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen:
AMD CoolnQuiet
Die CoolnQuiet Technologie kann die CPU Geschwindigkeit und Stromaufnahme effektiv und dynamisch reduzieren.

86

MS-7641
C1E Support
Whrend des Leerlaufs aktiviert die Funktion, um die Stromaufnahme lesen.
Nicht alle Prozessor untersttzt Enhanced Halt Stand (C1E).
SVM Support
Hier knnen Sie die Technologie des AMD SVM (Secure Virtual Machine)
deaktivieren / aktivieren.
AMD CoolnQuiet
Die CoolnQuiet Technologie kann die CPU Geschwindigkeit und Stromaufnahme
effektiv und dynamisch reduzieren.

wichtig
Fr eine einwandfreie Funktion von CoolnQuiet muss folgende Vorgehensweise
unbedingt sichergestellt werden:
* BIOS Setup ausfhren und whlen Cell Menu aus Unter Cell Menu setzen Sie
AMD CoolnQuiet, auf Enabled.
* ffnen Sie Windows und whlen Sie [Start] -> [Einstellungen] -> [Systemsteuerung] -> [Energieoptionen]. Gehen Sie zu Eigenschaften von Energieopt ionen
und whlen Sie Minimaler Energieverbrauch unter Energieschemas.
C1E Support
Whrend des Leerlaufs aktiviert die Funktion, um die Stromaufnahme lesen. Nicht
alle Prozessor untersttzt Enhanced Halt Stand (C1E).
Adjust CPU FSB Frequency (MHz)
Hier knnen Sie die CPU FSB Frequenz verndern (in MHz).
OC Stepping
OC Stepping ist aktiviert, nachdem Sie die Frenquenz der bertaktung im Adjust
CPU Base Frequency (MHz) einstellt. Die folgenden Einzelteile erscheinen und
das System kann Schritt fr Schritt bertaken nach System Laden des Betriebssystems oben.
Start OC Stepping From (MHz)
Hier kann den Angangs-Base-Takt angeben. Das system bootet mit dem Angangs-Base-Takt, und bertakt vom Angangs-Base-Takt zu eingestellten BaseTakt, die im Adjust CPU FSB Frequency (MHz) Schritt fr Schritt einsetzen.
OC Step
Stellt wieviele Schritte fr das niedrige Grundtakt bertaktung ein.
OC Step Count Timer
Stellt die Pufferzeit fr jeden Schritt ein.
Adjust CPU Ratio
Hier knnen Sie die CPU-Taktmultiplikator (Ratio) angeben. Dies knnen Sie nur
benutzen, wenn der Prozessor die Funktion untersttzt.
Adjusted CPU Frequency (MHz)
Zeigt die verstellte Frequenz der CPU (FSB x Ratio). Nur Anzeige keine nderung mglich.

87

Adjust CPU-NB Ratio

Hier knnen Sie die CPU-NB-Taktmultiplikator (Ratio) angeben.
Adjusted CPU-NB Frequency (MHz)
Zeigt die verstellte Frequenz der CPU-NB. Nur Anzeige.
Unlock CPU Core
Hier knnen Sie den CPU-Kern freischalten. Bitte beachten Sie dazu die nachfolgend beschriebenen Verfahren beziehen, um die CPU-Kern im BIOS-Setup
freizuschalten.
Advanced Clock Calibration
Hier knnen Sie bertakten. Lautet die Einstellung auf [Enabled], kann eine
hhren CPU-Ratio angeben, nur wenn der Prozessor diese Funktion sttzt.
CPU Core Control
Gesteuert werden dei Anzahl der CPU-Kerne. Mit der Einstellung [Auto], wird
das CPU unter die standardmig zulssigen Korne fhren. Mit der Einstellung
[Manual], knnen Sie die spezifischen CPU Kern deaktivieren/ aktivieren.
Core X
Hier knnen Sie die Kore X deaktivieren / aktivieren.
OC Genie Lite
Die Einstellung [Enabled] erlaubt das System, maximaler FSB-Takt zu erkennen
und automatish zu bertakten. Wenn die bertaktung nicht ausgefhrt werden
kann, knnen Sie bei niedriger FSB-Takt fr erfolgreiche bertaktung versuchen.
Memory-Z
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
DIMM Memory SPD Information
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen. Das
Untermen zeigt die Informationen des installierten Speichers an.
Advance DRAM Configuration
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
DRAM Timing Mode
Whlen Sie aus, ob DRAM-Timing durch das SPD (Serial Presence Detect)
EEPROM auf dem DRAM-Modul gesteuert wird. Die Einstellung [Auto By SPD]
ermglicht die automatische Erkennung des DRAM timings durch das BIOS auf
Basis der Einstellungen im SPD. Das Vorwhlen [Manual] eingestellt, knnen
Sie den DRAM Timing anpassen.
FSB/DRAM Ratio
Knnen Sie hier den FSB/Speicher des Ratios anpassen.
Adjusted DRAM Frequency (MHz)
Gibt der verstellt Frequenz des Speicher. Nur Anzeige.
HT Link Control
Drcken Sie die Eingabetaste <Enter>, um das Untermen aufzurufen.
HT Incoming/ Outgoing Link Width
Setzt die Bandbreite des Hyper-Transport Links fest. Mit der Einstellung [Auto],

88

MS-7641
erkennt das System die HT Link Bandbreite automatisch.
HT Link Speed
Gibt die Betriebsfrequenz des Taktgebers des Hypertransport Links vor. Mit der
Einstellung [Auto], erkennt das System die HT Link Geschwindigkeit automatisch.
Adjusted HT Link Frequency (MHz)
Gibt der verstellt Frequenz des HT-Links. Nur Anzeige keine nderung
mglich.
Auto Disable DRAM/PCI Frequency
Lautet die Einstellung auf [Enabled] (eingeschaltet), deaktiviert das System die
Taktung leerer PCI Sockel, um die Elektromagnetische Strstrahlung (EMI) zu
minimieren.
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
Diese Option bietet Ihnen an, die Spannung der CPU, des Speichers und des
Chipsatz anzupassen.
Spread Spectrum
Pulsiert der Taktgenerator des Motherboards, erzeugen die Extremwerte (Spitzen) der Pulse EMI (Elektromagnetische Interferenzen). Die Spread Spectrum
Funktion reduziert die erzeugten EMI, indem die Pulse so moduliert werden, das
die Pulsspitzen zu flacheren Kurven reduziert werden. Sollten Sie keine Probleme
mit Interferenzen haben, belassen Sie es bei der Einstellung [Disabled] (ausgeschaltet), um bestmgliche Systemstabilitt und -leistung zu gewhrleisten. Stellt
fr sie EMI ein Problem dar, whlen Sie die gewnschte Bandbreite zur Reduktion
der EMI. Denken Sie daran Spread Spectrum zu deaktivieren, wenn Sie bertakten, da sogar eine leichte Schwankung eine vorbergehende Taktsteigerung
erzeugen kann, die gerade ausreichen mag, um Ihren bertakteten Prozessor
zum einfrieren zu bringen.

WICHtIG
* Sollten Sie keine Probleme mit Interferenzen haben, belassen Sie es bei der
Einstellung [Disabled] (ausgeschaltet), um bestmgliche Systemstabilitt und
-leistung zu gewhrleisten. Stellt fr sie EMI ein Problem dar, whlen Sie die
gewnschte Bandbreite zur Reduktion der EMI.
* Je grer Spread Spectrum Wert ist, desto grer nimmt der EMI ab, und das
System wird weniger stabil. Bitte befragen Sie Ihren lokalen EMI Regelung zum
meist passend Spread Spectrum Wert.
* Denken Sie daran Spread Spectrum zu deaktivieren, wenn Sie bertakten, da
sogar eine leichte Schwankung eine vorbergehende Taktsteigerung erzeugen
kann, die gerade ausreichen mag, um Ihren bertakteten Prozessor zum einfrieren zu bringen.

89

Load Optimized Defaults

Hier knnen Sie die BIOS- Voreinstellungen fr den stabilen Betrieb laden, die der
Mainboardhersteller vorgibt.

90

MS-7641

760GM-P24 (FX)/ 760GM-P22
(FX)/ 760GM-P21 (FX) (MS-7641 v3.x) Micro-ATX.
760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX)
AMD 760G & SB710.
AMD AM3+
.

Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JTPM1

JUSB1

JUSB2

SATA6

JUSB_PW2

SATA5

JCOM 1

SATA3

JLPT1(optional)

SATA1

JFP2
JAUD1

SATA2

AMD
SB710
PCI1

(optional)
SATA 4

PCI_E2

JFP1

91

AMD FX / Phenom II / Athlon II / Sempron

AM3+.
( CPU,
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0, 5.2 /

: AMD 760G
: AMD SB710

DDR3 800/ 1066/ 1333 SDRAM (16 Max)

2 DDR3 DIMM (240 / 1.5V)
( ,

http://www.msi.com/service/test-report/)
LAN
LAN 10/100/1000 Fast Ethernet Realtek 8111E
(760GM-P24 (FX)/ 760GM-P22 (FX))
LAN 10/100 Fast Ethernet Realtek 8105E (760GMP21 (FX))

Realtek ALC892 (760GM-P24 (FX))

Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21
(FX))
7.1
Azalia 1.0
SATA
4 SATA 3/ AMD SB710 (760GM-P21 (FX))
6 SATA 3/ AMD SB710 (760GM-P24 (FX)/ 760GMP22 (FX))
RAID
SATA 1~4 RAID 0/ 1/ 10 JBOD
AMD SB710 (760GM-P21 (FX))
SATA 1~6 RAID 0/ 1/ 10 JBOD
AMD SB710 (760GM-P24 (FX)/ 760GM-P22 (FX))

I/O
1 PS/2
1 PS/2
1 VGA
6 USB 2.0
1 LAN
6 (760GM-P24 (FX))

92

MS-7641
3 (760GM-P22 (FX)/
760GM-P21 (FX))
,
2 USB 2.0
1
1
1
1 TPM

1 PCIE x16
1 PCIE x1
1 PCI, PCI 3.3V/ 5V

Micro-ATX (209 x 244)

http://www.msi.com/index.php

93



. .

/
.

* ,

.
* ,
,
.

94

MS-7641

LAN

VGA

CS-

USB 2.0

RS-

SS-
()

AM3+

. , ,
,
.

AM3+ .


.

95


.
.
.

, .

2.

(gold
arrow) CPU.
, . CPU

.

3.

CPU
,
. ,
CPU
.

4.

CPU
. CPU
,
CPU ,

.

5.

.
.

6.

,
.
.

7.

8.

CPU
.

,
.

96

MS-7641

. .
.
2.

DIMM .
, DIMM
. DIMM ,
.
DIMM ,
.

3.

, DIMM
.

* ,
.
* , DIMM1.

97

24- ATX: JPWR1

24- ATX
. ,
, .
.

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

4- ATX: JPWR2
4-.
.

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

, ATX .
Serial ATA: SATA1 ~ 6
Serial ATA Serial ATA.
Serial ATA.

Serial ATA.
.

98

MS-7641
: CPUFAN, SYSFAN1

+12 . ,
+12 , - GND.
,

.
CPUFAN

SYSFAN1

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

: JFP1, JFP2

. JFP1 Intel Front Panel I/O Connectivity
Design Guide.

P
o

Spe

w
e
r
0

L
E
D

zer

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz

.+
8
.6 .+
4 .
2

.N

ch

it

JFP1

ake

: JLPT1 ()

. -
. EPP (
) ECP (
).

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

99

 : JCOM1
16550A,
16- FIFO.
.
in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

: JAUD1
.
Intel Front Panel I/O Connectivity Design Guide.
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB : JUSB1, JUSB2

, Intel I/O Connectivity Design
Guide,
USB HDD, , MP3 , ,
..
d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

100

MS-7641
TPM : JTPM1
TPM (Trusted Platform Module)
.
TPM.

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

: JCI1
,
.
.
. BIOS.

d
n
u RU
ro T
.G IN
2 .C
1

CMOS: JBAT1
CMOS ,
. , CMOS ,
.

( CMOS), .

JBAT1

CMOS 1-2
, . CMOS
: .

101

 USB: JUSB_PW1, JUSB_PW2

USB,
VCC5 5VSB. 5VSB, ,
USB .

JUSB_PW1

(
USB 2.0

)

USB VCC5
USB 5VSB

JUSB_PW2
( USB
)

USB VCC5
USB 5VSB

5VSB,
2A .

102

MS-7641
PCIE
PCIE
PCIE.

PCIE x16 .

PCIE x1 .

PCI
PCI LAN, SCSI, USB
,
PCI.

,
.

(,
BIOS).
PCI
IRQ - interrupt request (line) - ,
,
. PCI IRQ PCI
:

PCI 1

INT E#

INT F#

INT G#

INT H#

103

 BIOS
. POST
( ).
, <DEL> .
Press DEL to enter SETUP
( DEL SETUP)
, ,
, , RESET.
, , , <Ctrl>,
<Alt>, <Delete>.
Main Page ( )

Standard CMOS Features ( CMOS)

(, , ..).
Advanced BIOS Features ( BIOS)
BIOS.
Integrated Peripherals ( )

.
Power Management Setup ( )
.
H/W Monitor ( )
.

104

MS-7641
Green Power
.
BIOS Setting Password ( BIOS)
, .
Cell Menu ( )

.
M-Flash
/ BIOS USB media device.
Overclocking Profile
/ / CMOS BIOS.
Load Fail-Safe Defaults
BIOS,
.
Load Optimized Defaults ( )

.
Save & Exit Setup ( )
CMOS .
Exit Without Saving ( )
.

105

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

/
DRAM/ CPU-NB. .
CPU Specifications
<Enter> .
CPU.
CPU Technology Support
<Enter> . ,
CPU.
CPU Feature
<Enter> :
AMD CoolnQuiet
CoolnQuiet
CPU .

106

MS-7641
C1E Support
CPU,
. Enhanced Halt
state (C1E).
SVM Support
/ AMD
SVM (Secure Virtual Machine).
AMD CoolnQuiet
CoolnQuiet
CPU .

, CoolnQuiet
, :
* BIOS Setup, Cell Menu. AMD
CoolnQuiet Cell Menu, Enabled.
* Windows [Start]->[Settings]->[Control Panel]->[Power Options].
Power Options Properties, Minimal Power Management
Power schemes.
C1E Support
CPU,
. Enhanced Halt state
(C1E).
Adjust CPU FSB Frequency (MHz)
FSB ( ).
OC Stepping
Adjust CPU
FSB Frequency (). .
.
Start OC Stepping From (MHz)

(base clock).
(base clock),
Adjust CPU FSB Frequency ().
OC Step
base
colck.
OC Step Count Timer
.
Adjust CPU Ratio
(ratio).
, .

107

Adjusted CPU Frequency (MHz)

CPU. .
Adjust CPU-NB Ratio
CPU-NB.
Adjusted CPU-NB Frequency (MHz)
CPU-NB. .
Unlock CPU Core
,
[Enabled] Advanced Clock Calibration
[Auto], .
Advanced Clock Calibration
. [Auto]
CPU . ,
.
CPU Core Control

. [Auto], CPU
. [Manual], /
CPU.
Core X
/ X.
OC Genie Lite
[Enabled]
FSB . ,
FSB .
Memory-Z
<Enter> .
DIMM Memory SPD Information
<Enter> .
.
Advance DRAM Configuration
<Enter> .
DRAM Timing Mode
DRAM
SPD (Serial Presence Detect) EEPROM DRAM.
[Auto By SPD], DRAM,
, , BIOS
SPD. [Manual],
DRAM
.
FSB/DRAM Ratio
FSB
.

108

MS-7641
Adjusted DRAM Frequency (MHz)
. .
HT Link Control
<Enter> .
HT Incoming/ Outgoing Link Width
/ HT.
[Auto], HT.
HT Link Speed
HyperTransport.
[Auto],
HT.
Adjusted HT Link Frequency (MHz)
HT. .
Auto Disable DRAM/PCI Frequency
[Enabled],
PCI,
(EMI).
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
CPU, .
Spread Spectrum
,
- EMI (Electromagnetic Interference).
Spread Spectrum ,
. , [Disabled]
() . ,
,
, [Enable] ().
Spread Spectrum,
. ,
.

* , [Disabled]
() . ,
, Spread Spectrum .
* Spread Spectrum,
, .
Spread Spectrum,
, .
* Spread Spectrum,
. ,

.

109


BIOS
, .

110

MS-7641

760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) (MS-7641

v3.x) Micro-ATX 760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX)
AMD 760G SB710
AM3+ AMD 760GM-P24 (FX)/ 760GM-P22 (FX)/
760GM-P21 (FX)

Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JUSB_PW2
JTPM1

JUSB1

JUSB2

SATA6

JCOM 1

SATA5

JLPT1(optional)

SATA3

JFP2
JAUD1

SATA1

PCI1

SATA2

AMD
SB710

(optional)
SATA 4

PCI_E2

JFP1

111

AM3+ AMD FX / Phenom II / Athlon II / Sempron

(CPU
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0 5.2 GT/s

: AMD 760G
: AMD SB710

DDR3 800/ 1066/ 1333 SDRAM ( 16GB)

2 DDR3 DIMM (240pin / 1.5V)
(
http://www.msi.com/service/test-report/)
LAN
Realtek 8111E (760GM-P24 (FX)/ 760GM-P22 (FX)) 10/100/1000

Realtek 8105E (760GM-P21 (FX)) 10/100

Realtek ALC892 (760GM-P24 (FX))

Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
8
Azalia 1.0
SATA
AMD SB710 4 SATA 3Gb/s (760GM-P21 (FX))
AMD SB710 6 SATA 3Gb/s (760GM-P24 (FX)/ 760GMP22 (FX))
RAID
AMD SB710SATA 1~4 RAID 0/ 1/ 10 JBOD (760GMP21 (FX))
AMD SB710SATA 1~6 RAID 0/ 1/ 10 JBOD (760GMP24 (FX)/ 760GM-P22 (FX))

I/O
1 PS/2
1 PS/2
1 VGA
6 USB 2.0
1 LAN
6 (760GM-P24 (FX))
3 (760GM-P22 (FX)/ 760GM-P21 (FX))

2 USB 2.0
1

112

MS-7641

1
1
1 TPM

1 PCIE x16
1 PCIE x1
1 PCI 3.3V/ 5V PCI

Micro-ATX (244mm x 209mm)

: http://www.msi.com/index.php

113

114

MS-7641

LAN
Line-In RS-Out

VGA

Line-Out CS-Out

USB 2.0

MIC SS-Out
()

AM3+ CPU
CPU, CPUCPU
CPU

AM3+ CPU
CPU

115

CPU
CPU
.

90

2.

CPU
CPU

3.

CPU

4.

CPU
CPU
CPUCPU

5.

6.

7.

8.

CPUCPU

116

MS-7641

.
2.

DIMM

3.

* DIMM1

117

ATX 24-Pin : JPWR1

ATX 24-PinATX 24-Pin

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4-Pin : JPWR2

4-Pin CPU

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

ATX

ATA : SATA1 ~ 6
ATAATA

ATA90

118

MS-7641
: CPUFAN, SYSFAN1
+12V
,+12VGND

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

r
o

.+
8
.6 .+
4 .
2

zer
r

.N

ch

it

1
S

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz
Spe

ake
P

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2
JFP1

SYSFAN1
CPUFAN

: JFP1, JFP2
JFP1Intel
I/O

: JLPT1 ()

EPP()ECP()

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

119

: JCOM1
16FIFOs16550A

in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2

I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

: JAUD1
IntelI/O

io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2

L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB : JUSB1, JUSB2, JUSB3

Intel I/OUSB
USB HDDMP3

d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2

in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

120

MS-7641
TPM : JTPM1
TPM (Trusted Platform Module)TPM

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

: JCI1
,
BIOS

d
n
u RU
ro T
.G IN
2 .C
1

CMOS : JBAT1
CMOS RAM
CMOS RAM

JBAT1

1-2CMOS
CMOS

121

USB : JUSB_PW1, JUSB_PW2

USB VCC5 5VSB
USB 5VSB

JUSB_PW1

( USB
2.0 )
USB
VCC5

USB
5VSB

JUSB_PW2
( USB
)

USB
VCC5

USB
5VSB

5VSB 2A

122

MS-7641
PCIE
PCIE PCIE

PCIE x16

PCIE x1

PCI
PCISCSIUSBPCI

BIOS
PCI
IRQ
PCIIRQPCI:

PCI 1

INT E#

INT F#

INT G#

INT H#

123

BIOS
POST()
<DEL>
Press DEL to enter SETUP
Setup
RESET<Ctrl><Alt><Delete>

Standard CMOS FeaturesCMOS

Advanced BIOS FeaturesBIOS

Integrated Peripherals

Power Management Setup

H/W Monitor
CPU
Green Power

BIOS Setting PasswordBIOS

BIOS

124

MS-7641
Cell Menu
/
M-Flash
BIOS
Overclocking Profile
BIOSCMOSCMOS
Load Fail-Safe Defaults
BIOS
Load Optimized Defaults
BIOS
Save & Exit Setup
CMOSSetup
Exit Without Saving
CMOSSetup

125

Current CPU/ DRAM/ CPU-NB Frequency

CPU/ DRAM/ CPU-NB
CPU SpecificationsCPU
<Enter>CPU
CPU Technology Support CPU
<Enter>CPU
CPU FeatureCPU
<Enter>:
AMD CoolnQuietAMD
(CoolnQuiet)CPU

126

MS-7641
C1E Support
CPU
(C1E)
SVM Support
/ AMD SVM (Secure Virtual Machine)
AMD CoolnQuietAMD
(CoolnQuiet)CPU

(CoolnQuiet):
* BIOS(Cell Menu) Cell Menu()
AMD CoolnQuiet (AMD ) Enabled
* Windows[Start]->[Settings]->[Control Panel]->[Power Options]Power Options PropertiesPower schemesMinimal
Power Management
C1E Support
CPU
(C1E)
Adjust CPU FSB Frequency (MHz) CPU FSB
CPU
OC Stepping
Adjust CPU FSB Frequency (MHz)

Start OC Stepping From (MHz)

CPU FSB CPU FSB
CPU FSB Adjust CPU FSB Frequency
(MHz)
OC C Step

OC Step Count Timer

Adjust CPU Ratio CPU

CPU
Adjusted CPU Frequency (MHz) CPU MHz
CPU(FSB x Ratio)
Adjust CPU-NB Ratio CPU-NB
CPU-NB
Adjusted CPU-NB Frequency (MHz) CPU-NB MHz
CPU-NB

127

Unlock CPU CoreCPU

CPU [Enabled] Advanced Clock Calibration [Auto]
Advanced Clock Calibration
[Enabled]CPU

CPU Core ControlCPU

CPU [Auto]CPU
[Manual]/ CPU
Core X
/ core X
OC Genie Lite
[Enabled]FSB
FSB
MEMORY-Z
<Enter>
DIMM Memory SPD InformationDIMM SPD
<Enter>
Advance DRAM Configuration
<Enter>
DRAM Timing Mode
SPD (Serial Presence Detect) EEPROM
[Auto] BIOSSPD
Advance DRAM Configuration [Manual]
Advance DRAM Configuration
FSB/DRAM RatioFSB/DRAM
FSB/ DRAM
Adjusted DRAM Frequency (MHz)MHz

HT Link ControlHT
<Enter>
HT Incoming/ Outgoing Link WidthHT /
Hyper-Transport[Auto]
HT
HT Link SpeedHT
Hyper-Transport[Auto]
HT
Adjusted HT Link Frequency (MHz) HT MHz
HT

128

MS-7641
Auto Disable DRAM/PCI Frequency DRAM/PCI
[Enabled]DRAM/PCI()
(EMI)
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
CPU
Spread Spectrum
EMI

[Disabled]

* EMI
[Disabled]EMISpread Spectrum()
EMI
* Spread Spectrum () EMI
Spread Spectrum () EMI
* , Spread Spectrum ()

129

130

MS-7641

760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) (MS-7641 v3.x)

Micro-ATX AMD 760G & SB710
760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) AM3+
AMD

Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JUSB_PW2
JTPM1

JUSB1

JUSB2

SATA6

JCOM 1

SATA5

JLPT1(optional)

SATA3

JFP2
JAUD1

SATA1

PCI1

SATA2

AMD
SB710

(optional)
SATA 4

PCI_E2

JFP1

131

AM3+ AMD FX / Phenom II / Athlon II / Sempron

( CPU
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.0, 5.2 GT/s

AMD 760G
AMD SB710

DDR3 800/ 1066/ 1333 SDRAM ( 16GB)

2 DDR3 DIMMs (240pin / 1.5V)
(
http://www.msi.com/service/test-report/)
LAN
Realtek 8111E LAN 10/100/1000 (760GM-P24 (FX)/
760GM-P22 (FX))
Realtek 8105E LAN 10/100 (760GM-P21 (FX))

Realtek ALC892 (760GM-P24 (FX))

Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
7.1
Azalia 1.0
SATA
AMD SB710 4 SATA 3Gb/s (760GM-P21 (FX))
AMD SB710 6 SATA 3Gb/s (760GM-P24 (FX)/ 760GMP22 (FX))
RAID
AMD SB710 SATA 1~4 RAID 0/ 1/ 10 JBOD
(760GM-P21 (FX))
AMD SB710 SATA 1~6 RAID 0/ 1/ 10 JBOD
(760GM-P24 (FX)/ 760GM-P22 (FX))

1 PS/2
1 PS/2
1 VGA
6 USB 2.0
1
6 (760GM-P24 (FX))
3 (760GM-P22 (FX)/ 760GM-P21 (FX))

132

MS-7641

2 USB 2.0
1
1
1
1 TPM

1 PCIE x16
1 PCIE x1
1 PCI 3.3V/ 5V PCI

Micro-ATX (209 mm X 244 mm)

http://tw.msi.com

133

134

MS-7641

RS-

VGA

CS-

USB 2.0

SS-
()

AM3+

AM3+ CPU

135

.

90

2.

CPU CPU

3.

CPU
CPU

4.

CPU
CPU

5.

6.

7.

8.

CPU CPU

136

MS-7641

.
2.

3.

* DIMM1

137

ATX 24-Pin JPWR1

ATX 24-pin ATX 24-pin

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4-Pin JPWR2

CPU

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

ATX

Serial ATA SATA1 ~ 6

Serial ATA Serial ATA

Serial ATA 90

138

MS-7641
CPUFAN, SYSFAN1
+12V
+12V GND
CPU

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

r
o

.+
8
.6 .+
4 .
2

zer
r

.N

ch

it

1
S

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz
Spe

ake
P

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2
JFP1

SYSFAN1
CPUFAN

JFP1, JFP2
LED JFP1 Intel /

JLPT1 ()

(EPP)(ECP)

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

139

JCOM1
16 FIFO 16550A

in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2

I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

JAUD1
Intel /
io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2

L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB JUSB1, JUSB2

Intel / USB
USB MP3

d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2

in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

140

MS-7641
TPM JTPM1
TPM

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

JCI1

BIOS

d
n
u RU
ro T
.G IN
2 .C
1

CMOS JBAT1
CMOS RAMCMOS RAM

JBAT1

CMOS 1-2
CMOS

141

USB JUSB_PW1, JUSB_PW2

VCC5 5VSB USB
USB 5VSB

JUSB_PW1

(
USB 2.0
)

USB
VCC5

USB
5VSB

JUSB_PW2
(
USB
)

USB
VCC5

USB
5VSB

5VSB 2A

142

MS-7641
PCIE
PCIE PCIE

PCIE x16

PCIE x1

PCI
PCI SCSI USB PCI

BIOS
PCI
IRQ (Interrupt request line)
PCI IRQ PCI

PCI 1

INT E#

INT F#

INT G#

INT H#

143

BIOS
POST ( )
<DEL>
Press DEL to enter SETUP
( DEL )

RESET <Ctrl><Alt> <Delete>

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

H/W Monitor

Green Power

144

MS-7641
BIOS Setting Password
BIOS
Cell Menu

M-Flash
USB BIOS
Overclocking Profile
BIOS CMOS BIOS CMOS
Load Fail-Safe Defaults
BIOS
Load Optimized Defaults
BIOS
Save & Exit Setup
CMOS
Exit Without Saving

145

Cell Menu

Current CPU/ DRAM/ CPU-NB Frequency

CPU/ CPU-NB
CPU Specifications
<Enter> CPU
CPU Technology Support
<Enter> CPU
CPU Feature
<Enter>
AMD CoolnQuiet
CPU

146

MS-7641
C1E Support
CPU
Enhanced Halt state (C1E)
SVM Support
SVM (Secure Virtual Machine)
AMD CoolnQuiet
CPU

CoolnQuiet
* BIOS Cell Menu AMD CoolnQuiet
[Enabled]
* Windows ->->->

C1E Support
CPU Enhanced Halt state (C1E)
Adjust CPU FSB Frequency (MHz)
CPU ( MHz )
OC Stepping
Adjust CPU FSB Frequency (MHz)

Start OC Stepping From (MHz)

base clock base clock
base clock Adjust CPU FSB Frequency

OC Step
CPU FSB
OC Step Count Timer

Adjust CPU Ratio

CPU
Adjusted CPU Frequency (MHz)
CPU
Adjust CPU-NB Ratio
CPU-NB

147

Adjusted CPU-NB Frequency (MHz)

CPU NB
Unlock CPU Core
CPU [Enabled] Advanced Clock
Calibration [Auto]
Advanced Clock Calibration
[Auto] CPU

CPU Core Control

CPU [Auto]CPU
[Manual],
Core X
Core X
OC Genie Lite
[Enabled] FSB
FSB
Memory-Z
<Enter>
DIMM Memory SPD Information
<Enter>
Advance DRAM Configuration
<Enter>
DRAM Timing Mode
DRAM DRAM SPD EEPROM
[Auto] BIOS SPD DRAM
[Manual] DRAM
FSB/DRAM Ratio
FSB /
Adjusted DRAM Frequency (MHz)

HT Link Control
<Enter>
HT Incoming/ Outgoing Link Width
[Auto]

148

MS-7641
HT Link Speed
Hyper-Transport [Auto] HT

Adjusted HT Link Frequency (MHz)

HT
Auto Disable DRAM/PCI Frequency
[Enabled] PCI PCI ()
(EMI)
CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
CPU
Spread Spectrum
(EMI)
EMI
[Disabled] EMI
[Enabled]

* (EMI) [Disabled]
EMI
*

149

150

MS-7641

760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX) (MS-7641 v3.x)

Micro-ATX
760GM-P24 (FX)/ 760GM-P22 (FX)/ 760GM-P21 (FX)AMD 760G & SB710
AM3+ AMD

Top : mouse
Bottom:keyboard

VGA Port

USB2.0 ports

CPUFAN
T: Line-I n
M: Line-O ut
B: Mic
T:RS-Ou t
M:CS-Ou t (optional)
B:SS-O ut

JPWR1

DIMM1
DIMM2

JPWR2

Top: LAN Jack

Bottom: USB ports

JUSB_PW1

USB2.0 ports

SYSFAN1

AMD
760G

PCI_E1

JBAT1

JCI1
BUZ1

BATT
+

JUSB_PW2
JTPM1

JUSB1

JUSB2

SATA6

JCOM 1

SATA5

JLPT1(optional)

SATA3

JFP2
JAUD1

SATA1

PCI1

SATA2

AMD
SB710

(optional)
SATA 4

PCI_E2

JFP1

151

AM3+ AMD FX / Phenom II / Athlon II / Sempron

(CPUWeb
http://www.msi.com/service/cpu-support/)
HyperTransport
HyperTransport 3.05.2 GT/s

: AMD 760G
: AMD SB710

DDR3 800/ 1066/ 1333 SDRAM (16GB)

DDR3-DIMM2 (240 / 1.5V)
(Web
http://www.msi.com/service/test-report/)
LAN
Realtek 8111E LAN 10/100/1000
(760GM-P24 (FX)/ 760GM-P22 (FX))
Realtek 8105E LAN 10/100 (760GM-P21
(FX))

Realtek ALC892 (760GM-P24 (FX))

Realtek ALC887 (760GM-P22 (FX)/ 760GM-P21 (FX))
7.1
Azalia 1.0
SATA
AMD SB710SATA 3Gb/s4 (760GM-P21 (FX))
AMD SB710SATA 3Gb/s6 (760GM-P24 (FX)/ 760GMP22 (FX))
RAID
SATA 1~4AMD SB710RAID 0/ 1/ 10JBOD
(760GM-P21 (FX))
SATA 1~6AMD SB710RAID 0/ 1/ 10JBOD
(760GM-P24 (FX)/ 760GM-P22 (FX))

I/O
PS/2 1
PS/2 1
VGA 1
USB 2.0 6
LAN 1
6 (760GM-P24 (FX))
3 (760GM-P22 (FX)/ 760GM-P21 (FX))

152

MS-7641

USB 2.0 2
1
1
1
TPM 1

PCIE x16 1
PCIE x1 1
PCI 13.3V/ 5V PCI

Micro-ATX (244mm x 209mm)

Web

http://www.msi.com/index.php

153

I/O

* /

154

MS-7641

I/O

LAN
Line-In RS-Out
VGA

Line-Out CS-Out

USB 2.0

MIC SS-Out
()

AM3+ CPU
CPU
CPU
CPU

AM3+ CPU

155

CPUCPU

CPU
.

90
CPU

2.

CPU
CPU

3.

CPU

CPUCPU

4.

CPU
CPU
CPU
CPU

5.

6.

7.

8.

CPU

CPU

156

MS-7641

.

2.

DIMMDIMMDIMM

3.

* DIMM1

157

ATX 24: JPWR1

ATX24

d
n
u
ro
V
.G 5 V
4
2 3.+ +5 V
d
2 2. +5 s un d
2 1. Re o un d
2 0. Gr o n #
2 9. Gr rou ON d
1 8. G - un
1 7. PS o
1 . r V V
6
G
1 5. -12 .3
1 4. +3
1 3.
1

V
.3
3 V
.+ 2 V
2 1 2
1 1.+ +1 B OK
1 0. VS R nd
1 .5 W u
9 .P ro nd
8 .G 5V u
7 .+ ro nd
6 .G 5V u
5 .+ ro V
4 .G 3.3 3V
3 .+ 3.
2 .+
1

ATX 4: JPWR2
4CPU

d
n
u d
ro un
.G ro
1 .G
2

V
2
1 V
.+ 2
3 .+1
4

ATA: SATA1 ~ 6
ATA
ATA

ATA90

158

MS-7641
: CPUFAN, SYSFAN1
+12V+12V
GND

d
n
u
ro 2V or
.G 1 s
1 .+ en
2 .S
3

d
n
u
ro 2V or l
.G 1 s o
1 .+ en ntr
2 .S o
3 .C
4

r
o

.+
8
.6 .+
4 .
2

zer
r

.N

ch

it

1
S

D D
in E LE
P rL d
o e n
.N w e d
7 .Po sp n
5 .Su rou
3 .G
1

in
P o 8. +
.
6 .4 +
.
2

Buz
Spe

ake
P

ch
it
w
d
e tS
rv e
D
s
E
se e
L
e R
D
.R
D
9 +
H
.
7 .5 .3 .+
1

JFP2
JFP1

SYSFAN1
CPUFAN

: JFP1, JFP2
LED
JFP1

: JLPT1 ()

EPP(Enhanced Parallel Port)

ECP(Extended Capabilities Parallel Port)

T
C
L
Y
.S
5 E S
2 3.P U K# 7
2 1.B C ND 6
2 9.A R ND 5
1 7.P R ND 4
1 5.P R ND
1 .P R D3 2
3
1 1.P RN D 1
1 .P RN D 0
9 .P N D
7 .PR N B#
5 .PR ST
3 .R
1

in
P d
o un d
.N ro un d
6
2 .G ro un d
4
2 2.G ro un d
2 .G o n
0 r u d
2 .G r o u n d
8
#
1 6 . G r o u n d IN
1 .G ro un L
4
S
1 2.G ro _ #
1 0.G PT IT
1 .L IN #
R #
8
.P
6 ER D
.
4 .AF
2

159

: JCOM1
16550A16FIFO

in
P
o
.N S
0 T R
1 .C S
8
.D R
6 DT N
.
4 SI
.
2
I S d
.R T n
9 . R r ou T
7 .G U
5 . SO C D
3 .D
1

: JAUD1

io
ct
te
e
D
e
n
o
n
h
io
P
ct #
d
e E
a
e Pin et C
D EN
.H
0 o
1 N IC S
.
8 .M RE nd
6 .P ou
4 Gr
.
2
n
L
e D
n
o N
h E R
P _S ne
d
o
a E h
e NS P
.H E d
9 .S a R
7 .He IC L
5 .M I C
3 .M
1

USB: JUSB1, JUSB2

Intel I/O Connectivity Design GuideUSB HDD
MP3USB

d
C un +
.N o 1
0 r B 11 .G
8 US B
. S
6 .U C
4 VC
.
2
in
P d
n
o u +
.N r o 0
9 .G SB 07 .U B
S
5 .U CC
3 .V
1

160

MS-7641
TPM: JTPM1
TPM (Trusted Platform Module)
TPM

3
in
p 2
ta in
a p 1
d ta pin 0
n
e s & da ta pi
m s & da ta
a
ra re s
F d s & d
C ad dre ss &
P
re s
.L C d d s
3 P a d re
1 1.L C a dd et
1 .LP C a es k
9 LP C R loc
.
7 .LP C C
5 .L P C
3 .LP
1

d
n
u nd
r
ro u n r
e
.G ro Pi we Q r ow
4
1 2 . G o P o IR w e y p
1 0.N V ial o b
1 .5 r P nd
8 Se 3V ta
.
6 3. S
.
4 .3V
2

: JCI1

BIOS

d
n
u RU
ro T
.G IN
2 .C
1

CMOS: JBAT1
BIOSCMOS

CMOSOS

JBAT1

CMOS1-2()
CMOS

161

USB: JUSB_PW1, JUSB_PW2

VCC55VSBUSB
USB5VSB

JUSB_PW1

(USB
2.0
)

USB
VCC5

USB
5VSB

JUSB_PW2
(
USB
)

USB
VCC5

USB
5VSB

5VSB2A

162

MS-7641
PCIE
PCIEPCIE

PCIE x16

PCIE x1

PCI
PCI

BIOS

PCI
CPUPC
()PCIIRQ
:

PCI 1

INT E#

INT F#

INT G#

INT H#

163

BIOS
POST (Power On Self Test)
<DEL>

Press DEL to enter Setup Menu

(<DEL>)
<DEL>
<RESET><Ctrl><Alt><Delete>

Standard CMOS Features (CMOS)

/
Advanced BIOS Features (BIOS)
BIOS
Integrated Peripherals ()
IDE

Power Management Setup ()

H/W Monitor (H/W)

PC
Green Power

164

MS-7641
BIOS Setting Password (BIOS)

Cell Menu ()
/
M-Flash
USBBIOS
Overclocking Profile ()
CMOS/ CMOS

Load Fail-Safe Defaults (BIOS)

Load Optimized Defaults ()

Save & Exit Setup ()

Exit Without Saving ()

165

Current CPU/ DRAM/ CPU-NB Frequency (CPU/ DRAM/ CPU-NB)

CPU/DRAM/CPU-NB()
CPU Specifications (CPU)
<Enter>CPU

CPU Technology Support (CPU)

<Enter>CPU

CPU Feature (CPU)

<Enter>
AMD CoolnQuiet
CoolnQuiet

166

MS-7641
C1E Support (SVM)
CPUCPU
(C1E)
SVM Support (SVM)
AMD SVM () /
AMD CoolnQuiet
CoolnQuiet

CoolnQuiet
* BIOS[Cell Menu][Cell
[AMD CoolnQuiet][Enable]

Menu]

* [Start]->[Settings]->[Control Pannel]->[Power Options]

[Power Options Properties][Power schemes]
[Minimal Power Management]
C1E Support (C1E)
CPUCPU
(C1E)
Adjust CPU FSB Frequency (MHz) (CPU FSB)
CPU FSB
OC Stepping ()
[Adjust CPU FSB Frequency (MHz) (CPU FSB)]

Start OC Stepping From (MHz) (OC Stepping)

[Adjust CPU FSB Frequency (MHz) (CPU FSB)]

OC Step ()

OC Step Count Timer ()

Adjust CPU Ratio (CPU)

CPU

Adjusted CPU Frequency (MHz) (CPU)

CPU()
Adjust CPU-NB Ratio (CPU-NB)
CPU-NB

167

Adjusted CPU-NB Frequency (MHz) (CPU-NB)

CPU-NB()
Unlock CPU Core (CPU)
[Enabled][Advanced Clock Calibration] [Auto]

Advanced Clock Calibration ()

[Enabled]CPU

CPU Core Control (CPU)

CPU[Auto]CPU
[Manual]CPU/

Core X
X/
OC Genie Lite
[Enabled]FSB

FSB
Memory-Z
<Enter>
DIMM Memory SPD Information (DIMMSPD)
<Enter>

Advance DRAM Configuration (DRAM)

<Enter>
DRAM Timing Mode (DRAM)
DRAMDRAMSPD (Serial Presence Detect) EEPROM[Auto]
DRAM[Advance DRAM Configuration]SPD
[Manual]
FSB/DRAM Ratio (FSB/DRAM)
FSB

Adjusted DRAM Frequency (MHz) (DRAM)

DDR()
HT Link Control (HT)
<Enter>
HT Incoming/ Outgoing Link Width (HT/)
Hyper-Transport Link[Auto]

168

MS-7641
HT link
HT Link Speed (HT)
Hyper-Transport[Auto]
HT
Adjusted HT Link Frequency (MHz) (HT)
HT()
Auto Disable DRAM/PCI Frequency (DRAM/PCI)
[Enabled]DIMM/PCI

CPU VDD Voltage (V)/ CPU-NB VDD Voltage (V)/ DRAM Voltage (V)
CPU
Spread Spectrum

(EMI)

[Disabled]
[Disabled]

*
[Disabled]
[Enabled]
* Spread
Spectrum

* [Disabled]

169

Load Optimized Defaults ()

BIOS

170


<>

(Pb)

(Hg)

(Cd)

(Cr6+)

(PBB)

(PBDE)

(Battery)

/
(Cable/ Connector)

/ (Chassis/ Other)

(CD, DVD)
(Optical Disk Driver)

(Hard Disk Driver)

(PCAs)*

(I/O Device)
(Mouse, Keyboard)

(LCD Panel)

(Memory)

(Processor and Heatsink)

(CDDVD)

(Power Supply)

(Remote Control)

(Speakers)

(TV Tunner)

(Web Camera)

(Wireless Cards)

. *(PCB)IC
2.
3. :SJ/T11363-2006

4. :SJ/T11363-2006
EU RoHS
5. <>
EPUP (Environmental Protection Use Period)
6. EPUP-(SJ/Z
11388-2009)EPUP,