Basic Steps for Setting up

Phased Array Scan on

OmniScan 2.0 Software
By: Nick Bublitz

2
Group Wizard
The best place to start is the Group Wizard as it will set many
parameters from other menus in one easy step by step process. The
Group Wizard encompasses the parameters contained in the
Probe/Part menu.
3
Choose to Modify or Add a Group
Choose modify to set
up first scan or change an existing
group, add to
add another scan using
MultiGroup if you have
this option. With
MultiGroup you can set
up to 8 simultaneous
scans as well as
multi-probe applications.
4
Define Your Part
Choose plate if flat. Select material for an
approximate velocity determination. Enter part thickness.
By entering a true part thickness you enable the Omniscan
to calculate true depth/thickness readings off of leg skips
and multiples.

5
Select Group Type
PA for phased array, UT for conventional
ultrasound connected through the phased array connector.
To use the PA channels as conventional channels off of the
PA connection you will require an adapter to break out the
individual PA channels.
6
Choose Connection
Choose applicable pulser/reciever connections. If you
have one probe connected via the PA connection, the
OmniScan will disable this selection. With an extension
cable or Y-adapter you can choose the connection.
When using multiple probes on a
16:128 via the Y-adapter, probe 1
will be elements 1-64,(con. 1),
probe 2 will be 65-128 (con.65).
7
Select Probe
OmniScan probes will
Auto detect.

If using a non-OmniScan
connector probe-you must
toggle off auto detect first
and then select your probe.
Select probe by case style,
then by model number-(inscribed
on probe case).


8
Select Wedge
Select your wedge from
the list.
Select wedge by case style then model number-
labeled on wedge

Custom Wedge files entered
into the OmniScan will appear
in the User field selection.
9
Define Offsets
Useful for taking readings from
a reference position, ex: side
of plate and weld centerline.
Input offsets in applicable axis
as needed.

Skew change to reflect side
from which inspection is done
from.

Proper offset input is critical
for data correlation in encoded
scans and volumetric
readings.
10
End of Wizard
Press Continue to
continue
into the Law (Focal) Wizard
The Focal Law
Wizard will
encompass the
Focal Law menu
parameters.
11
Choose Your Scan Type
Sectorial Scan- multiple angle
inspection ex: 35-70 degree
shear wave with an angle
beam wedge

Linear Angle- 1 fixed angle
being rastered through the
probe- ex: 45 degree SW that
begins in the back of the
probe and rasters forward
to the front. Mimics moving
a 45 degree conventional probe
forward and aft.

Linear at 0- For o degree
encoded scans where you
will overlap in the index axis



12
Choose Wave Type
Shear Wave or
Longitudinal Beam- the
approximate values will
be displayed based on
your material selection
in the last wizard.
13
Select Probe Elements-Sectorial Scan
Must define Aperture Size
(element quantity)
-groups of elements that will
fire together to form an
individual beam.

As well as where in the
probe to start firing-element 1
is almost always
in the back of the probe.

In Sectorial scans we choose 1 group of elements that will be
repeatedly pulsed to form our entire angular sweep.Ex:35-70
-the aperture will fire a beam at 35, then 36, there is no
movement along the probe

14
Select Probe Elements-Linear Scan
In addition to aperture (element Qty.) and a start element (first
element), in Linear scans we must also define where to
stop the electronic raster (Last Element). We must also
define how to move through the probe between pulses
(element step).
With an Element Qty. of 16, first element of 1, last element 64,
and Element step of 1 the Omniscan will:
First pulse: fire elements 1-16 to form a beam at chosen angle
Second Pulse: move 1 and fire 2-17 ,
Third pulse: move1 and fire 3-18
This will continue until we reach our stop (49-64) and repeat.


15
Choose Your Angle(s)
Sectorial Scan- choose a
start (min) and stop (max)
angle for the scan. ex: 35 min
70 max will create a 35-70
Degree Sectorial scan.
Linear Scan- choose 1 angle
to be rastered through the
probe. Ex: 45 degree linear
Scan.
Angle Step- 1 degree step for the above Sectorial
will fire a beam at and display data from every
1 degree between 35 and 70 degrees.= (.1, .5, 1 degree options are
common) 1 degree step is usually sufficient. Angular distance between
beams fired. This will be disabled for Linear scan.
Focus Depth- Choose a depth to focus at, limited to Near Field for
true focus.


16
Generate Focal Law
17
Data- File/Save Mode Menu
Choose how you would like
to record data.
Inspection Data-full a-scan
info for post processing
etc, larger data files-
recommended
Screen- Jpg. of screen for
custom report
Also indication table and
report options but these
can be generated from the
Inspection Data during
post analysis.
18
Format Report- File/Format and File/Report Menus
Choose the items to be
included in the report
if one is generated.
For most detailed report turn on all
fields and choose table for defect
table and screen shots of each
indication selected by the operator..
Can also add notes, headers, and
user fields to meet your specific needs.
19
Display-Display/Selection Menu
Choose the display you
want to view while
scanning.
If using c-scan define the
type.

With a MultiGroup file
define whether only
the selected group
(current) or all groups
will be displayed.


20
Display-Display/Overlay Menu
Turn on/off useful features like reference lines
(overlay), analysis cursors, gates, sizing
curves etc. Also change the UT unit- true
depth, sound path, time, to fit your
inspection.
21
Choose an Inspection Range-UT Settings/General
Menu
Define the start and width of your range. Gain can also be
adjusted from this menu.
22
Pulser-UT Settings/ Pulser Menu
Configure Pulser settings.
For most inspections set
voltage to low at first.
Can usually leave PRF and
PW to optimum as the software
will optimize based on
scan setup parameters.

23
Receiver-UT Setting/ Receiver Menu
Usually set receive filter to Auto
for most inspections and the
software will narrow the
bandwidth to the probe
connected.
Choose rectifier.
Choose averaging if needed.
Video filter will clean up
both A-scan and image
displays. Video filter can
not be used for RF
selection.
24
Preferences-Pref. Menu
Can adjust screen
brightness (up to 75%
on battery, 100%
on AC),
indoor/outdoor
scheme, and choose
English or metric units
25
Readings Fields-Measurements/Reading Menu
There are two lists to
configure with real time
readings that will also be
included in the report and
defect table.
Predefined groups have
been formed for many of
the common inspections.





Toggle between lists
26
Gate Settings-Gate/Alarm- Gate and Alarm Menu
3 gates- A,B, I available with
a variety of ways to configure
Including alarms and operators
for and/or type situations.

In the gate menu toggle
parameters setting to switch
between position or mode
parameter adjustments.
27
Scan Menu-For Encoded Scans
Encoder Menu-choose encoder, set polarity (direction of
travel), type of encoder, resolution, start point of scan.
Inspection Menu-Choose type of scan, clock or encoder, and
view scan speed.
Area menu- define length and width of scan in each axis and
set resolution.
Start Menu-Define what to do upon start acquisition input
Data Menu- Define data parameters for storage

28
Calibrations
Add Calibrations to your
setup and you are
ready to go!
Velocity
Wedge Delay
Sensitivity
DAC/TCG
Code Dependant