Scribd
Upload
45 views2 pages

Features & Specifications

This document provides specifications for a wind turbine, including a 28 inch diameter turbine with 42 aluminum vanes, stainless steel base and top plates, frictionless rotation provided by sealed bearings, an 18mm high carbon steel central shaft, metal inner and outer arms, a fiberglass base plate, and a weight of approximately 6.5 kg.

Uploaded by

cad_lokesh2007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
45 views2 pages

Features & Specifications

This document provides specifications for a wind turbine, including a 28 inch diameter turbine with 42 aluminum vanes, stainless steel base and top plates, frictionless rotation provided by sealed bearings, an 18mm high carbon steel central shaft, metal inner and outer arms, a fiberglass base plate, and a weight of approximately 6.5 kg.

Uploaded by

cad_lokesh2007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Features & Specifications

Turbine Dia 28 Inch (760mm)


Neck/Throat 24 Inch (610mm)
Height 18 Inch (460mm)
Vanes(Blades) 42 Vanes , Aluminum 0.5 mm thickness Alloy 8011
Base Ring MOC
(Mounting ring)
Stainless steel
Top Plate MOC Stainless Steel 0.8 mm thickness
Rotation
Twin Sealed 6203ZZ bearings with self lubricating Dupont Zytel 101L
Polyamide 66 resin to ensure frictionless rotation even at lowest wind
velocity Twin Sealed 6201ZZ bearings with self lubricating Dupont Zytel
101L Polyamide 66 resin to ensure frictionless rotation even at lowest
wind velocity
Centre shaft 18mm high carbon steel zinc plated.
Inner Arms M.S. with electro zinc plating
Outer Arms M.S. with electro zinc plating
Frp base plate
2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet
profile. Weight 8 kg(Approx)
Weight 6.5 Kg approx
Center Width 800mm 5 mm
Dia of Bottom Ring 600mm 15 mm
Nos of Bearing 02 Nos
Bearing Type SKF 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed
Rivets Aluminum Alloy with Washer

You might also like