Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    103.a.0 Oil Consumption

    Uploaded by

    mkchy12
    This document provides operational parameters for a steam turbine at various load conditions including: - Main steam flow, temperature, and pressure at 100% load condition - Main steam flow at maximum continuous rating (3% above 100% load) - Main steam flow and auxiliary feed water flow, temperature, and pressure at 30% load oil support condition It also lists boiler efficiency, heat load, calorific value of fuel oil, and corresponding oil consumption rate.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    103.a.0 Oil Consumption

    Uploaded by

    mkchy12
    53 views1 page
    This document provides operational parameters for a steam turbine at various load conditions including: - Main steam flow, temperature, and pressure at 100% load condition - Main steam flow at maximum continuous rating (3% above 100% load) - Main steam flow and auxiliary feed water flow, temperature, and pressure at 30% load oil support condition It also lists boiler efficiency, heat load, calorific value of fuel oil, and corresponding oil consumption rate.

    Original Description:

    Oil Consumption Calculation

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides operational parameters for a steam turbine at various load conditions including: - Main steam flow, temperature, and pressure at 100% load condition - Main steam flow at maximum continuous rating (3% above 100% load) - Main steam flow and auxiliary feed water flow, temperature, and pressure at 30% load oil support condition It also lists boiler efficiency, heat load, calorific value of fuel oil, and corresponding oil consumption rate.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    53 views1 page

    103.a.0 Oil Consumption

    Uploaded by

    mkchy12
    This document provides operational parameters for a steam turbine at various load conditions including: - Main steam flow, temperature, and pressure at 100% load condition - Main steam flow at maximum continuous rating (3% above 100% load) - Main steam flow and auxiliary feed water flow, temperature, and pressure at 30% load oil support condition It also lists boiler efficiency, heat load, calorific value of fuel oil, and corresponding oil consumption rate.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 1

    Particulars Unit Reference/ Remarks

    SH Steam Flow @ VWO condition TPH 1025 HBD


    SH Steam Temp @ VWO condition
    o
    C 537 HBD
    SH Steam Pressure @ VWO condition MPA 16.67 HBD
    SH Steam Enthalpy @ VWO condition kJ/kg 3394.4 HBD
    SH Steam Flow @ BMCR condition TPH 1055.75 3% margin over VWO flow
    SH Steam Flow @ 30% BMCR Oil Support
    condition TPH 316.73 30% of BMCR flow
    Drum Operating Pressure MPA 18.87 Techinical Particulars
    Water Enthalpy @ Drum kJ/kg 1772.8 Steam Table
    Blow-down Flow @ 30% BMCR Oil
    Support condition TPH 9.50 3% of cycle flow
    Feed Water Temp @ VWO condition
    o
    C 280.6 HBD
    Feed Water Enthalpy @ VWO condition kJ/kg 1234.2 HBD
    Feed Pump Discharge Pressure kg/cm
    2
    224.24 Techinical Particulars
    Pressure Drop in each HP Heater MPA 0.3 Techinical Particulars
    Number of HP Heaters 3
    Pressure Drop in HP Heaters MPA 0.9
    Feed Water Pressure @ VWO condition kg/cm
    2
    215.06
    MPA 21.09
    Feed Water Flow @ 30% BMCR Oil
    Support Condition TPH 326.23
    Feed Water Temp @ 30% BMCR Oil
    Support Condition
    o
    C 275 Assumed
    Feed Water Pressure @ 30% BMCR Oil
    Support Condition MPA 21.09 Same as VWO Condition
    Feed Water Enthalpy @ 30% BMCR Oil
    Support Condition kJ/kg 1206.4 Steam Table
    Heat Transfer to steam cycle kJ/hr 698376091.20
    kCal/hr 167075619.90
    Boiler Efficiency @ Oil firing mode 80% Assumed
    Boiler Heat Load kCal/hr 208844524.88
    Calorific Value of Oil kCal/kg 10000 Fuel Analysis
    Density of Oil kg/m
    3
    850
    Oil Consumption kg/hr 20884.45
    m
    3
    /hr 24.57

    You might also like