2014 Sony Corporation 4-535-957-11 (1)

RM-LVR1
Live-View Remote
This Handbook is a supplement for this units Operating Instructions.
It introduces some added or modified functions
and describes their operation.
Also refer to the Operating Instructions of this unit.
2-GB
Table of contents
Clock Setting

3
Button hold function

4
LCD screen indicator

5
REC display while movie recording and interval photo recording

5
Switching the screen indicator with the DISP button

5
Camera setting

6
Changing the camera settings via this units MENU

6
Automatic exposure setting

7
Automatic camera date setting

7
Zooming

8
Warning message

9
Memory card warning indicator

9
Multi camera control HDR-AS100V

10
Preparing this unit

10
Registering a camera on this unit

11
This units LCD screen indicators

12
Connecting this unit to the cameras

14
Switching the Live-View display

14
Recording images

15
Resetting the Network settings

16
3-GB
Clock Setting
You can set the year/month/day/time by selecting Main Settings Clock
Setting.
You can also select the date format.
1
Press the MENU button to display the setting items. Then select
Main Settings Clock Setting.
2
Select the desired date format and then press REC/ENTER
button.
MENU
Y-M-D
Y-M-D Year-Month-Day
M-D-Y Month-Day-Year
M(Eng)-D-Y Month (in English)-Day-Year
D-M-Y Day-Month-Year
3
Press the UP button or DOWN button to select the desired date
and then press the REC/ENTER button to confirm.
Press the MENU button to return to the previous setting.
MENU
1 1 - - 2014
Note
When using for the first time or after updating of this units software, the clock
setting screen is displayed. Set the clock before using this unit.
4-GB
Button hold function
This function prevents you from accidentally pressing this units buttons while
carrying it around.
Press the MENU button of this unit for 2 seconds or more to set the button hold
function.
REC
ENTER
In button hold mode, appears on the LCD screen of this unit. The REC/ENTER
button, DISP button, UP button and DOWN button of this unit are disabled.
To cancel button hold mode, press the MENU button of this unit for 2 seconds or
more, or press the ON/OFF (Power) button to turn off the power of this unit.
Notes
The button hold function is only available when this unit is connected to a
camera by Wi-Fi. When not connected, the button hold function cannot be used.
The button hold function cannot be used during MENU display.
When the Wi-Fi connection between this unit and the camera is disconnected,
the button hold function is cancelled.
5-GB
LCD screen indicator
REC display while movie recording and interval
photo recording
When you start recording by pressing the REC/ENTER button of this unit, the REC/
Wi-Fi lamp changes from blue to red and appears at the bottom left of the
screen.
REC
ENTER
Switching the screen indicator with the DISP button
When this unit is connected to a camera by Wi-Fi, pressing the DISP button of this
unit switches this units LCD screen display as follows:
AM
Live-View display Icon off Clock display Screen off
6-GB
Camera setting
Changing the camera settings via this units MENU
You can change this units settings by pressing the MENU button of this unit.
You can also change cameras settings by pressing the MENU button of this unit
while it is connected to the camera by Wi-Fi.
SteadyShot Setting
You can configure the SteadyShot setting of the camera by selecting MENU
* Camera Settings.
ON Uses SteadyShot.
OFF Does not use SteadyShot.
* The icon displayed on the LCD screen of this unit differs depending on the recording mode of
the connected camera.
Field Angle Setting
You can configure the field angle setting of the camera by selecting MENU
* Camera Settings.
120 Records with a field angle of 120.
170 Records with a field angle of 170.
* The icon displayed on the LCD screen of this unit differs depending on the recording mode of
the connected camera.
Notes
When this unit is not connected to a camera by Wi-Fi, the camera settings icon is
not displayed on the LCD screen of this unit.
The SteadyShot setting and field angle setting are only available with
compatible cameras. Also refer to the compatibility information.
7-GB
Automatic exposure setting
When this unit is connected to a Sony Digital Still Camera QX series model or other
compatible camera, the exposure mode of the camera is automatically set to
Intelligent Auto.
Notes
The automatic exposure setting function is not compatible with the HDR-AS15/
AS30V/AS100V.
The automatic exposure setting function is only available with the compatible
cameras. Also refer to the compatibility information.
Depending on the connected camera model (if it has a mode dial etc.), the
exposure mode may be unchanged.
Automatic camera date setting
When this unit is connected to a Sony Digital Still Camera QX series model, the
date setting of this unit also appears in the camera.
Notes
The automatic camera date setting function is not compatible with the HDR-
AS15/AS30V/AS100V.
The automatic camera date setting function is only available with the
compatible cameras. Also refer to the compatibility information.
8-GB
Zooming
Depending on the connected camera, the zoom function is enabled during
recording.
When the Live-View display is on the LCD screen of this unit or during movie
recording, you can operate the camera zoom by pressing the UP/DOWN button of
this unit.
REC
ENTER
Telephoto (Subject appears closer.)
Wide-angle (Subject appears further away.)
Notes
The zoom function is not compatible with the HDR-AS15/AS30V/AS100V.
The zoom function is only available with the compatible cameras. Also refer to
the compatibility information.
9-GB
Warning message
Memory card warning indicator
If no memory card is inserted into the camera which is connected to this unit by
Wi-Fi, blinks at the top left of the screen.
REC
ENTER
Note
The memory card warning indicator only appears when this unit is connected to
a compatible cameras. Also refer to the compatibility information.
10-GB
Multi camera control
HDR-AS100V
When using the HDR-AS100V, you can operate up to 5 cameras at the same time
with this unit.
Preparing this unit
1
Select Connection Setting in Network Settings in the MENU
screen.
2
Select Multi connection.
SINGLE connection
Operates one camera with this unit.
MULTI connection
Operates more than one camera with this
unit.
Notes
The multi camera control function is only available with the compatible cameras.
When operating a camera that does not support the multi camera control
function, set this unit to SINGLE connection.
For more details, refer to the Instruction Manual of the camera and compatibility
information.
11-GB
Registering a camera on this unit
1
Select in the MENU screen.
This unit shifts to registration standby mode. (After about 2 minutes,
registration standby mode is cancelled.)
2
Select [confg] [Wi-Fi] [multi] [NEW] in [SETUP] on the
camera.
[PREP] blinks on the display of the camera, and preparation for registration
starts.
3
When [OK] is displayed on the LCD screen of this unit, press the
REC/ENTER button of this unit to confirm registration.
When registration is completed, [DONE] appears on the display of the camera
and 2 seconds later recording mode is restored.
4
Repeat steps 1 to 3 to register each camera that you want to
connect.
Notes
For more details, refer to the Instruction Manual of the camera.
Register cameras before connection standby mode of this unit is cancelled.
Once 5 cameras have been connected to this unit, another camera cannot be
registered.
12-GB
This units LCD screen indicators
Recording mode and status of the camera
The recording mode and status of the camera is displayed on the LCD screen of
this unit.
Recording mode/Status Displayed icon
Photo shooting mode
Movie recording mode
Interval photo recording mode
Connected
The position of the cursor indicates the camera currently displaying in
the Live-View.
While the connected camera is recording, is displayed on the icon.
The status is displayed, such as transmitting or connection being
processed.
13-GB
Error display
Error icon
An error icon is displayed on the LCD screen of this unit according to the status of
the connected camera.
Error icon Symptom Cause
Camera error Confirm the accessing camera.
Camera error
Confirm the accessing camera
or memory card.
Failed to connect
Confirm the accessing
camera.
There may be signal
congestion, or this unit may
be too far from the access
point.
Accessing an incompatible
device
This unit is accessing an
incompatible device. Check the
accessing device.
Error number
The following error numbers may appear on the LCD screen of this unit to provide
error information about multi camera control.
Error
number
Symptom Cause
03-03
Failed to connect
The camera is not recognized. You need to
do some operation on the camera you want
to connect.
There may be signal congestion, or this unit
may be too far from the access point.
03-04
03-05
Cannot connect to
the camera
This unit already has connected to the
maximum number of connectable camera.
Check the number of cameras you are
connecting.
14-GB
Connecting this unit to the cameras
This unit automatically connects to the registered cameras when the power to the
unit and the cameras is turned on.
ON
ON
Notes
Set the cameras that you want to connect to this unit to [MULTI]. For more details
on settings, refer to the Instruction Manual of each camera.
The maximum number of cameras you can connect at the same time is five.
When turning on the power of this unit, the REC/Wi-Fi lamp of this unit lights up
blue.
Switching the Live-View display
You can press the UP/DOWN buttons of this unit to move the cursor and switch
the Live-View display on the LCD screen of this unit to the display of any of the
connected cameras.
REC
ENTER
15-GB
Recording images
Press the REC/ENTER button of this unit to start recording movies or shooting
photos on all connected cameras.
To stop recording movies or interval photo recording, press the REC/ENTER button
of this unit again.
REC
REC
REC
Notes
The operation command from this unit when under multi camera control is sent
to all connected cameras.
This unit can do the following.
Change the recording mode
Start and stop movie recording and interval photo recording
Operate the shutter to shoot photos
Other camera settings such as image quality etc. should be done on the camera.
The reaction time of the connected cameras may differ depending on the
situation of each camera. There may be a time lag between the connected
cameras when starting recording etc.
If the recording mode of the connected cameras differs, recording is conducted
according to the recording mode of each camera.
If one or more of the connected cameras are recording, the REC/Wi-Fi lamp of
this unit lights up red.
If you press the REC/ENTER button of this unit at this time, the command to stop
recording is sent to all the connected cameras.
16-GB
Resetting the Network settings
To reset the Network settings of MULTI connection, conduct the following steps.
1
Select Resetting the Network Settings in Network
Settings in the MENU screen.
2
Select OK and then press the REC/ENTER button of this unit.