1

Revised on 01
st
July, 2014

MAJOR PROJECT REPORT / CODE-BCAM 213/CREDIT: 04

(Guidelines for BBA-CAM 3rd Semester)

Objective

1. Students of BBA-CAM 3
rd
Semester are to carry out a project as part of curriculum. At
the end of the semester the students are to submit a written project report. The objective of this
Circular is to standardise the format of submission of the project report and to lay guidelines to
conduct the project including methodology. This project work is the training for applying
theoretical concepts, tools & techniques to a live situation/problem and writing a Technical
Report.

University Scheme for Project

2. As per the syllabi of BBA-CAM (Paper code BCAM-213), students of Semester are to
write a project report comprising of 04 credits. The project report has two components, viz.

(a) External : Project Viva (50 Marks), where viva on written report
would be undertaken by an external examiner.

(b) Internal : Conduct & Submission Project Report (50 Marks) It
involves conduct of study & submission of report,
presentations & viva at the Institute.

Scope of the Project

3. It is partly a responsibility of the student to find a relevant topic for his/her project. The
topic is to be decided in consultation with the guide allotted to the student. Topic once fixed
cannot be changed. The project work would be based on primary data or secondary data or
both. Each student is required to carry out the work and submit the report individually.

ANY PREVIOUS WORK OR BORROWED REPORT WILL BE SUMMARILY
REJECTED AND IN ALL CASES OF REJECTION THE WORK IS TO BE REPEATED
AFRESH.

Proposal

4. The project proposal should be discussed with your respective guide in detail. The format
of the proposal is attached as Appendix A.







2



Final Report

5. The Guidelines for methodology to be adopted for conducting the project are attached as
Appendix-B. The format for compilation of project report is attached as Appendix-C.
Project reports are to be compiled as per laid down guidelines.

Schedule

6. As per the attached PET form.















Prof. Deepak Trivedi
(Project Coordinator)




















3



Appendix-A
(Refer Para 4)



PROJECT PROPOSAL



Each student is to discuss project proposal with their respective guides. The project
proposal must comprise the following aspects:

1. Title of the Project: Title should be meaningful and should convey the broad aspects
that will be covered in the body and the scope of the project.

2. Organisation/Company: Mention the name of organisation/company and the functional
area (e.g. marketing, finance and human resource) where you intend to do your project.
Briefly explain the nature of the organisation and its business. (Not more than 02 pages)

3. Objectives & Scope: Explain the objectives and the scope of the project.


4. Research Methodology:

(a) Explain the methodology for data collection.

(b) Explain the techniques proposed to be used for data analysis.

5. Questionnaire

















ONCE THE TITLE & THE ORGANISATION IS FIXED, IT
CANNOT BE CHANGED.

4


Appendix-B
(Refer Para 6)



METHODOLOGY OF PROJECT WORK



The methodology for carrying out the project is given in the following paragraphs. Each student
is to compile his/her study in four chapters as detailed below:


Chapter-I: Introduction

This chapter is to include the following aspects:

Profile of Industry/Organisation/Company (not more than 02 pages): Briefly explain the
nature of the organisation and its business.

Objectives of Study: It should be pragmatic and consistent with the title of the study and
achievable during the course of study within the prescribed schedule. Students are advised to
develop the objectives in consultation with their respective guides. The objectives must start with
action oriented verbs. A sample of objectives is given below:

(a) To study .

(b) To compare


Chapter-II: Research Methodology

The methodology is to be explained in two parts viz.,

(a) Methodology used for Data Collection: The project should be based on
primary data. For data collection, a questionnaire must be prepared and it has to be
made part of the project report. The questionnaire should be consistent with the
objectives and the scope of the study and duly vetted by the respective guide. The
questionnaire should be designed in a simple language so that the targeted population
must understand and able to respond effectively. Sampling technique and the sample
size should be selected according to the problem under study. The justification for
selecting particular sampling technique must be given. If in case of any secondary data,
proper references of sources of data must be compiled and mentioned against each data
used in the study in the following manner (with reference to above example):

(i) The sales data of Forbes & Kent brands of RO Water Purifier is collected
from their Annual Financial Statements for the period 2002-2006.
5

(b) Methodology used for Data Analysis: In this part the students should explain the
concepts, tools and techniques used for data analysis. The rational and justification for
using a particular tool and technique should be explained. For example if a student uses
Standard Deviation as a statistical tool, he should explain the concept of Standard
Deviation and its relevance to the study along with its formula.

(c) Theoretical Description: A brief theoretical description of concepts, tools and
techniques used in project along with definition of key words and formulae etc. should be
included.



Chapter-III: Data Presentation & Analysis

Raw data (primary or secondary) collected must be reduced to standard formats such as tables,
charts, graphs, diagrams etc and is to be presented in this chapter. The tool for data presentation
should be suitably selected so that interpretation and inferences could be drawn easily and
become self explanatory. Proper titles, legends, scales, source (s) etc must be mentioned
along with each diagram.

In this chapter, students are required to apply established theoretical concepts, tools and
techniques (discussed in Chapter-II) to the data presented and draw inferences. Students are
required to discuss rationale and logic for drawing inferences. For each inference, proper
linkages are to be established with the data analysed in this chapter. Wherever, calculations are
to be carried out, it must be provided before drawing any inference. The inferences are to be
presented in narrative form from each data set along with any limitation (s) due to data
insufficiency, if any.


Chapter-IV: Summary & Conclusions

This Chapter should comprise the following:

(a) Results of the Study: These are to be presented and supported by facts & figures
in narrative form and be culled out from the Chapter-III. The sequence of the results must
be consistent with the objectives of the study mentioned in Chapter-I. Also, mention the
achievement of objectives or otherwise.

(b) Limitations: The limitations could be mentioned in terms of data insufficiency,
time & expertise constraints etc.

(c) Suggestions: Any scope for extension of the study to new geographical areas,
segments, time with larger data, is to be mentioned under this heading.





6


Appendix-C
(Refer Para 6)



FORMAT OF THE PROJECT REPORT


Format

1. The final report should be written and compiled in the following the sequence:

(a) Title Page
(b) Certificate (s)
(c) Acknowledgement
(d) Contents
(e) List of Tables
(f) List of Figures
(g) List of Symbols
(h) List of Abbreviations
(i) Body of the Project Report (As per Appendix B)
(j) References/Bibliography
(k) Appendices

Title Page

2. The format of the title page is attached as Annexure-I.

Certificate

3. The format of the certificate is attached as Annexure-II. A certificate of the organization
where the student has conducted the project may also be attached separately after the Institutes
certificate.

Acknowledgements

4. In the Acknowledgements page, the writer recognizes his indebtedness for guidance
and assistance by the faculty guide and any other member (s). Courtesy demands that he/she also
recognizes specific contributions by other persons or institutions such as libraries and research
foundations. Acknowledgements should be expressed simply, tastefully, and tactfully duly
signed above the name.

Executive Summary

5. Executive Summary is a brief or condensed summary of the project for higher-level
management positions. It should be about 01 page in length. It should comprise company
profile, objectives & scope of the project, methodology and tools used results, limitations, and
directions for future development, if any.
7



Contents & List of Tables/Figures/Symbols/Abbreviation

6. The format of Contents and list of Tables/Figures/Symbols is attached as Annexure-III.

Body of the Project Report: Guidelines for Project Report/Dissertation Writing

7. The guidelines for writing the Project Report (methodology) are detailed in Appendix-B.
Following aspects must adhere to:

(a) Page Size: Good quality white A4 size executive bond paper should be used for
typing and duplication.

(b) Chapter Numbering: The chapters are to be numbered as Chapter-1, Chapter-2
etc. The heading/title of the chapter is to appear below the chapter number in uppercase.

(c) Page Specifications:

(i) Left Margin : 1.25 inch
(ii) Right Margin : 1.25 inch
(iii) Top Margin : 1 inch
(iv) Bottom Margin : 1 inch

(d) Page Numbers: All text pages starting from Body of the Project Report should
be numbered at the bottom center of the pages.

(e) Normal Body Text:

(i) Font Size: 12, Times New Roman, Double Spacing, Single Side Writing.
(ii) Paragraphs Heading Font Size: 12, Times New Roman.
(iii) Page/Title Font Size: 14

(f) Structure of Final Report: A project report should be covered between 50 to 60
typed pages in double space about 10,000 words (excluding Appendices and
Bibliography) on A4 size paper with 12 font size.

(g) Table and Figure Number: Table and figure numbers are to be written at the
bottom of the table/ figure as given below:

(i) Table No-1: Number of Employees in Organisation ABC

(ii) Figure No-1: Sales Figures of RO Water Purifier 2002-2006





8


(h) Binding & Color Code of the Report:

(i) Hard Bound Report
(ii) Background of the cover page - MAROON
(iii) Letters in GOLD

References/Bibliography

8. Secondary sources should be duly acknowledged. When accessing online sources, care
should be taken to mention the entire link, and not merely the website, in addition to date of
access. Examples are given below:

1. Carney, D. L., & Cochran, J. I., (1985), The 5ESS Switching System: Architectural
Overview, AT&T Technical Journal, vol. 64, no. 6, July-August, pp. 1339-1356.

2. Stevens, A., (1992), C++ Database Development, MIS Press, New York, p. 34.

3. In Encyclopedia Britannica. from http://search.eb.com, accessed on (date) and (time).

4. Give full link of the webpage, (example www.google.com is not accepted).


Appendices

9. The appendices are to be attached at the end of the report and to be numbered as
Appendix-A, Appendix-B etc. right justified at the top of the page. Below the word
Appendix write in parenthesis Refer Para No__. The para number should be the number in the
body of text where the reference of appendix is given. An appendix may have annexure (s). The
annexure, if any, are to be attached immediately after the said appendix. The annexure are to be
numbered as Annexure-I, Annexure-II etc.


9



Annexure-I

Title of Project Report
(Font size = 18)


(Name of the organization, if any)

Submitted in partial fulfillment of the requirements
for the award of the degree of



Bachelor of Business Administration (CAM)

To

Guru Gobind Singh Indraprastha University, Delhi




Guide: Submitted by:
(Guide Name) (Student name)
Roll No.:










Institute of Innovation in Technology & Management,
New Delhi 110058
Batch (2011-2014)


10

Annexure-II


Certificate


I, Mr./Ms._______________________________, Roll No. ________________ certify that
the Project Report/Dissertation BCAM 213) entitled
________________________________________________________________________
is done by me and it is an authentic work carried out by me at
___________________________________________________. The matter embodied in this
project work has not been submitted earlier for the award of any degree or diploma to the
best of my knowledge and belief.



Signature of the Student
Date:



Certified that the Project Report/Dissertation (BCAM-213) entitled

______________________________________________________________________

done by Mr./Ms._______________________________, Roll No. ________________, is

completed under my guidance.



Signature of the Guide
Name of the Guide:
Designation:
Date:





Countersigned
(Director / Project Coordinator)
11
Annexure-III

FORMAT FOR CONTENTS & LIST OF TABLES/FIGURES/ SYMBOLS

CONTENTS

S No Topic Page No
1 Certificate (s) -
2 Acknowledgements -
3 List of Tables -
4 List of Figures -
5 List of Symbols -
6 List of Abbreviations -
7 Chapter-1: Introduction
8 Chapter-2: Research Methodology
9 Chapter-3: Data Presentation & Analysis
10 Chapter-4: Summary and Conclusions
11 References/Bibliography
12 Appendices

FORMAT FOR LIST OF TABLES/FIGURES/ SYMBOLS/ABBREVIATIONS

LIST OF TABLES




LIST OF FIGURES


L
I
LIST OF SYMBOLS

L
I
S
LIST OF ABBREVIATIONS

S No Abbreviated Name Full Name
1 CRM Customer Relationship Management
2 EPS Earning Per Share

Table No Title Page No
1 Number of Employees in Organisation ABC
2
Figure No Title Page No
1 Sales Figures of RO Water Purifier 2002-2006
2
S No Symbol Nomenclature & Meaning
1

Sigma (Summation)
2 @ At the rate