Scribd
Upload
31 views1 page

Capture3

This document outlines the parameters used in a simulation of an OFDM system. It specifies that the simulation uses an FFT size of 1024, 128 active carriers, pilot ratios of 1/4, 1/8 and 1/16, a guard interval of 256 with cyclic extension, a sample rate of 44.1kHz and bandwidth of 17.5kHz. The signal uses BPSK constellation over a Rayleigh fading channel modeled by an AR process.

Uploaded by

Rushabh Modi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views1 page

Capture3

This document outlines the parameters used in a simulation of an OFDM system. It specifies that the simulation uses an FFT size of 1024, 128 active carriers, pilot ratios of 1/4, 1/8 and 1/16, a guard interval of 256 with cyclic extension, a sample rate of 44.1kHz and bandwidth of 17.5kHz. The signal uses BPSK constellation over a Rayleigh fading channel modeled by an AR process.

Uploaded by

Rushabh Modi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TABLE I.

SIMULATION PARAMETERS

Parameters Specifications

FFT size 1024
Number of active carriers(N) 128
Pilot ratio 1/4,1/8,1/16
Guard interval 256
Guard type Cyclic extension
Sample rate 44.1kHz
Bandwidth 17.5kHz

Signal constellation BPSK
Channel model Rayleigh fading,AR model

You might also like