Scribd
Upload
277 views5 pages

550 Schematic Reva

The document describes the basic stock wiring configuration for an engine with an alternator, ignition coil, starter solenoid, and fuse block. It shows the wiring connections for the alternator, ignition coil, solenoid, starter relay, and fuse block. The configuration grounds the relay and solenoid to the engine harness ground wire and provides spare circuits in the fuse block that could be used for additional components.

Uploaded by

suzuki_don
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
277 views5 pages

550 Schematic Reva

The document describes the basic stock wiring configuration for an engine with an alternator, ignition coil, starter solenoid, and fuse block. It shows the wiring connections for the alternator, ignition coil, solenoid, starter relay, and fuse block. The configuration grounds the relay and solenoid to the engine harness ground wire and provides spare circuits in the fuse block that could be used for additional components.

Uploaded by

suzuki_don
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 5

14

Engine
Case
Engine
Case Side
Plate
A
B
E
D
Side
Plate
C
F
Basic Simplified Stock Wiring
14
Engine
Case
Engine
Case Side
Plate
A
B
E
D
Side
Plate
C
F
Solenoid
Basic Simplified Stock Wiring
With Coil relay Modification
14
Engine
Case
Engine
Case Side
Plate
A
B
E
D
Side
Plate
C
F
Basic Simplified Stock Wiring:
Alternate R/R(+) wiring
15A
A. R/R(-) is single point ground ; attach to R/R mounting bolt with:
Direct wire to BATT (-)
Direct wire to closest Frame
Direct wire to harness ground (B/W)
B. Igniter Ground returns to Harness (B/W)
C. Solenoid Ground returns to Harness (B/W) unless mounted to same plate as R/R
D. Stator Wires have no preference; all shown as Yellow
E. Fuse block shows spare circuits available (O/G and O/R)
F. Main Harness (B/W) in harness for possible circuit returns (otherwise not used)



Notes

You might also like