Scribd
Upload
3K views1 page

Surface Area of A Dome

The document discusses why the surface area calculation for a domed tank is less than that of a flat-top tank. It explains that the formula for a domed tank's surface area is 2*π*r(r - (r - dome height)). This simplifies to 2*π*r*h, where h is the dome height. If h is small, the area of the dome cap will be much smaller than the area of the circular base. So a domed tank can have a lower surface area than a flat-top tank of the same radius if the dome height is short.

Uploaded by

ام يمنى ايمن
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views1 page

Surface Area of A Dome

The document discusses why the surface area calculation for a domed tank is less than that of a flat-top tank. It explains that the formula for a domed tank's surface area is 2*π*r(r - (r - dome height)). This simplifies to 2*π*r*h, where h is the dome height. If h is small, the area of the dome cap will be much smaller than the area of the circular base. So a domed tank can have a lower surface area than a flat-top tank of the same radius if the dome height is short.

Uploaded by

ام يمنى ايمن
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7/2/2014 Surface area of a dome - Math Central

http://mathcentral.uregina.ca/QQ/database/QQ.09.09/h/charlie1.html 1/1
Math Central Quandaries & Queries
Question from Charlie:
Why is the calculation for the surface area of a domed tank less than the surface area of a flat top
tank.
Using domed tank formula 2*pi*r(r-(r-dome ht) works out to be less surface area than a flat top
tank area formula pi*r x r,
Shouldn't the dome have more surface area than the flat surface ?
Hi Charlie,
The expression you have for the surface area of a dome is correct (except you misses a parenthisis). It is
2 r(r - (r - h)) square units
where h is the dome height. This simplifies to
2 r h square units.
If, for example, h = r so that the dome (light blue) is half of the sphere then the surface area of the dome
is 2 r
2
square units, twice the area ofthe base (dark blue). If h is very small then the area of the cap can
be much smaller than the area of the base.
I hope this helps,
Harley


Math Central is supported by the University of Regina and The Pacific Institute for the Mathematical Sciences.
Volume = (/6) h (3 r
2
+ h
2
)

You might also like