0% found this document useful (0 votes)
43 views1 page

Additional Electrical Work

This document provides a bill of quantities for electrical work including trench excavation, cable laying, street lighting poles, and a lighting control cabinet. It lists the material, equipment, labor, total quantity and rate in AED for each item, along with a total amount and remarks section. The document contains cost estimates for excavating trenches, laying cable, supplying cable, installing and commissioning street lighting poles and a lighting control cabinet.

Uploaded by

Waqas Liaquat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
43 views1 page

Additional Electrical Work

This document provides a bill of quantities for electrical work including trench excavation, cable laying, street lighting poles, and a lighting control cabinet. It lists the material, equipment, labor, total quantity and rate in AED for each item, along with a total amount and remarks section. The document contains cost estimates for excavating trenches, laying cable, supplying cable, installing and commissioning street lighting poles and a lighting control cabinet.

Uploaded by

Waqas Liaquat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Material Equipment Labor Total

12.001 Trench Excavation for laying one low voltage cable depth not less than 80cm L.M 1,000 -
12.013 Laying cable HV/LV size 70mm2 L.M 1,000 -
12.036 Supply LV 4C 70mm2 XLPE/SWA/PVC Cu.Armoured cable L.M 1,000 -
12.065
Supply, Install, test and commission street lighting pole 18/20m high complete
with 4X400W HpSV/MH laterns and lamps, pile foundation,arms, cut out unit
flag holder, base plater cover, cable terminations to cutout and onward wiring
to the lanterns by flex
No 12 -
12.148
Supply, install, test and commission 4 way ligting control cabinet as per the
latest ADWEA/ADDC specs complete with energy meter and required
ADDC/ADWEA fees, foudantion excavation, backfilling, earthing and cable end
termination if incoming cable
No 1 -
ADDITIONAL ELECTRICAL WORK AT WRM- TAL MOREEB PROJECT
Rate (AED)
Sl No. BOQ Item No. UOM
Total BOQ
Qty.
Amount
AED
Remarks

You might also like