Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Design and Fabrication of Hydraulic Puller

    Uploaded by

    ieee4mybusinessonly
    Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. This document describes a hydraulic puller device designed and fabricated by Ecway. The puller uses a hydraulic system consisting of a movable jaw, fixed jaw, and hydraulic circuit to tightly clamp and hold objects. When the pump is activated, hydraulic fluid powers a cylinder to move the movable jaw forward. Key advantages are that it provides a portable, integrated hydraulic circuit that safely removes products and saves labor over manual methods. Applications include use by motor and pump repair technicians to remove bearings from shafts.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Design and Fabrication of Hydraulic Puller

    Uploaded by

    ieee4mybusinessonly
    44 views4 pages
    Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. This document describes a hydraulic puller device designed and fabricated by Ecway. The puller uses a hydraulic system consisting of a movable jaw, fixed jaw, and hydraulic circuit to tightly clamp and hold objects. When the pump is activated, hydraulic fluid powers a cylinder to move the movable jaw forward. Key advantages are that it provides a portable, integrated hydraulic circuit that safely removes products and saves labor over manual methods. Applications include use by motor and pump repair technicians to remove bearings from shafts.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. This document describes a hydraulic puller device designed and fabricated by Ecway. The puller uses a hydraulic system consisting of a movable jaw, fixed jaw, and hydraulic circuit to tightly clamp and hold objects. When the pump is activated, hydraulic fluid powers a cylinder to move the movable jaw forward. Key advantages are that it provides a portable, integrated hydraulic circuit that safely removes products and saves labor over manual methods. Applications include use by motor and pump repair technicians to remove bearings from shafts.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    44 views4 pages

    Design and Fabrication of Hydraulic Puller

    Uploaded by

    ieee4mybusinessonly
    Ecway Technologies provides engineering projects and software development services from offices across South India and Bangalore/Hyderabad. This document describes a hydraulic puller device designed and fabricated by Ecway. The puller uses a hydraulic system consisting of a movable jaw, fixed jaw, and hydraulic circuit to tightly clamp and hold objects. When the pump is activated, hydraulic fluid powers a cylinder to move the movable jaw forward. Key advantages are that it provides a portable, integrated hydraulic circuit that safely removes products and saves labor over manual methods. Applications include use by motor and pump repair technicians to remove bearings from shafts.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    ECWAY TECHNOLOGIES

    IEEE PROJECTS & SOFTWARE DEVELOPMENTS


    OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
    BANGALORE / HYDRABAD
    CELL: 9894917187 | 875487 1111/2222/3333 | 8754872111 / 3111 / 4111 / 5111 / 6111
    Visit: www.ecwayprojects.com Mail to: [email protected]

    DESIGN AND FABRICATION OF HYDRAULIC PULLER


    ABSTRACT:

    A hydraulic fluid power system is defined as a means of power transmission in which


    relatively incompressible fluid is used as the power transmitting media. The primary purpose of
    hydraulic system is the transfer of energy from one location to another location and this energy into
    useful work.
    Power clamping is used for holding the job as for as quickly and maintain the constant
    pressure over the job. Here in our project PULLER is done by hydraulic system. Power clamping
    system consists of movable jaw, fixed jaw, and hydraulic circuit. This movable jaw is fixed with
    hydraulic cylinder. When pump is switched on the hydraulic cylinder will moves forward and holds
    the object very tightly.
    METHODOLOGY
    The Hydraulic system pressure can be generated in the form of any physical action which
    result a compression over the Hydraulic system or pneumatic pressure which is developed in the
    form of air compressing externally can be applied to activate

    WORKING OPERATION:
    ADVANTAGES
    It is a port type integrated hydraulic circuit.
    The product has safely removed.
    Need not required reservoir separately.
    Manpower saved is the great advantage.
    Time consumption is very less.

    DISADVANTAGES
    The leakage of the hydraulic fluid from the inlet valve during the transferring of fluid
    from the cylinder to the reservoir after the process.
    APPLICATIONS
    This puller is mainly used by electric motor service people and pump assemblers, and two
    wheeler, four wheeler mechanics for removing the bearing from the shaft.
    This device finds place in,
    It is used almost in all types of industries (Large, small, medium scale industries).
    This device is mainly used in AC Induction motor industries.
    This device is suitable to hold job of any diameter (maximum job diameter of 25 mm to
    70mm)

    WORKING DIAGRAM:

    LINE DIAGRAM OF HYDRAULIC PULLER

    0.25 H.P
    PUMP

    You might also like