Scribd
Upload
834 views

WPS Example

This document outlines the welding procedure specification for joining austenitic chromium-nickel materials using semi-automatic welding. It specifies the welding process, positions, materials, joint design, consumables, preheat and interpass temperatures, and welding parameters to be used. Testing is required to verify the weld meets specifications. The welder must be qualified and supervised, and the welding code and project specifications must be followed.

Uploaded by

Nur Wijianto
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
834 views

WPS Example

This document outlines the welding procedure specification for joining austenitic chromium-nickel materials using semi-automatic welding. It specifies the welding process, positions, materials, joint design, consumables, preheat and interpass temperatures, and welding parameters to be used. Testing is required to verify the weld meets specifications. The welder must be qualified and supervised, and the welding code and project specifications must be followed.

Uploaded by

Nur Wijianto
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

WELDING PROCEDURE

SPECIFICATION (WPS)
RECORD (PQR)
WELDER QUALIFICATION (WQR)
P No.:
CONTROLLED C: N/A
HEAT RATE: HOLD (MIN/HR): N/A
N/A COOL RATE:
NO. SIDE POS. DIR TYPE SIZE F No. VOLTS POL SPEED
NOTES:
REPORT No:
SHIELDING GAS:
FLUX:
CLIENT APPROVAL
APPROVED BY: APPROVED BY:
DATE: DATE:
COMPANY NAME
N/A
N/A
CONSUMABLES/DETAILS
COMPNAY APPROVAL
N/A
PREHEAT
INTERPASS
TEMP. C
WELDING SEQUENCE/POSITION
N/A
MATERIAL SPECIFICATION
MAX INTERPASS C:
Austenitic Cr-Ni
WELD JOINT TOLERANCES N/A
WELD JOINT PREPARATION DETAILS
PREHEAT C:
COUPON UNIQUE ID:
COUPON DIMENSIONS:

SEMI-AUTO TYPE (AUTO,MANUAL,SEMI-AUTO):


WELDING PROCESS:
WELDING PROGRESSION:
WELDING POSITION:
Weld Procedure Specification
TEST PLATE IDENTIFICATION
WELD PASS DETAILS
FLUX OR
GAS
N/A
HEAT
INPUT
KJ/mm
MATERIAL TYPE:
GROUP:
ELECTRODE DESCRIPTION
QUALIFICATION NOTES:
JOINT DESIGN
AMPS
N/A
N/A
TIME LAPSE
MAX
WELDING
PARAMETERS/CURRENT
CONSUMABLE
TREATMENT:
N/A
TESTING REQUIRED
WELD SEQUENCE NOTES
HOLD TEMP:
UNCONTROLLED:
NOTES/STAMP
304L
6 mm to 12 mm
8 mm
THERMAL TREATMENT
P.W.H.T.: No
GRADE:
N/A
MODE OF TRANSFER:
POWER SOURCE:
WELDING:
MACHINE/GUN:
BACKING MATERIAL TYPE:
ROOT OPENING:
ROOT FACE:
BACKING:
INTER PASS CLEANING:
EDGE PREPARATION:
JOINT TYPE:
GROOVE ANGLE:
PROJECT:
PROJECT SPECIFICATION:
WELDING CODE:
PROJECT No:
CONTRACT No:
CONSTRUCTION CODE:
THICKNESS:
DIAMETER (OD):
RANGE QUAL:
If the separation is 1.5mm or greater the fillet
N/A
N/A
FLOW RATE:
CONSUMABLE STORAGE:
SUPERVISED BY:
WELDER ID:
TITLE:
PREPARED BY:
ELECTRODE SIZE:
ELECTRODE TYPE:
BACK PURGE RATE:
STRING OR WEAVE BEAD:
LOCATION:
DATE WELDED:
CONTACT TUBE TO WORK DISTANCE:
WELDER:
MARKED:
size shall be increased by that amount.
SPEC.
MGL-F-253 Rev 2 Draft Page 1 of 2
NO. SIDE POS. DIR TYPE SIZE F No. VOLTS POL SPEED
COMPANY NAME
PREHEAT
INTERPASS
TEMP. C
TIME LAPSE
MAX
WELD PASS DETAILS FLUX OR
GAS
ELECTRODE DESCRIPTION
HEAT
INPUT
KJ/mm SPEC.
CONTINUED WELDING PROCEDURE SPECIFICATION
AMPS
WELDING
PARAMETERS/CURRENT
MGL-F-253 Rev 2 Draft Page 2 of 2

You might also like