The document outlines the steps for configuring a multi-standard multi-mode network including WCDMA-GSM 900 and LTE-GSM 1800 configurations. It details connecting sector equipment like TMAs and RETs, configuring the DUG master and slave IDBs and GPS, and installing and configuring the new hardware during the migration process. An exercise is included to add a 1+1+1+1 WCDMA configuration to an existing 4 sector 6+6+6+6 network with GPS synchronization on the DUG master only.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
538 views23 pages
MSMM Workshop
The document outlines the steps for configuring a multi-standard multi-mode network including WCDMA-GSM 900 and LTE-GSM 1800 configurations. It details connecting sector equipment like TMAs and RETs, configuring the DUG master and slave IDBs and GPS, and installing and configuring the new hardware during the migration process. An exercise is included to add a 1+1+1+1 WCDMA configuration to an existing 4 sector 6+6+6+6 network with GPS synchronization on the DUG master only.
Installation & Config Process 1- Check available Tools : Before MDT - OMT R52E 2- Check Available HW : Before MDT - 1 DUW/DUS with CPRI cable ( 3 if 3 Sectors) - Add 3 RUS 1800 in case of MSMM LTE-GSM - 1 ESB cable for TG Synch for W-G 900 - GPS Out Cable RPM 777 382 - TMA and RET for each Sector Installation & Config Process 3- Inspect Existing Installation Before MDT - If lightning Arrester is installed it needs to be dismantled otherwise TMA will not properly work - Check if Analog cross connect exists and properly connected between RUS of the same Sector (RXA->RXB) Installation & Config Process 2- Installation : Before MDT - Install the DUW/DUS - Install the TMA, RET without connecting to Sector Installation & Config Process 3- 2G Reconfiguration : During MDT - Connect CPRI cable as per Target configuration - GPS out connection - ESB cable connection in case of W-G 900 - Reconfigure IDB - Connect RET and TMA, after definition from DUW/DUS
EXERCISE We have 6+6+6+6 ( 4 Sector), we want to achive the same config by adding WCDMA 1+1+1+1 Only DUG Master is synchronized through GPS out