Accident Causations Safety Theories

TOPIC 3 ACCIDENT CAUSATION THEORIES
1
OBJECTIVES: THEORY OF ACCIDENT CAUSATION
LEARNING OUTCOMES
By the end of this topic, you should be able to:

1. Review the 7 theories of accident causation;

2. Evaluate the accident causation factors of each of the 7
accident causation theories; and

3. Justify the best accident causation theory to predict
and prevent accidents at workplace.

.
2
THEORY OF ACCIDENT CAUSATION
.
3.1 Domino Theory
3.1.1 Heinrichs Industrial Safety Principles
3.1.2 Heinrichs Domino Theory
3.2 Human Factors Theory
3.2.1 Overload
3.2.2 Inappropriate Response/Unsuitable Response
3.2.3 Inappropriate Activities
3.3 Accident/Incident Theory
3.4 Epidemiological Theory
3.5 Systems Theory
3.6 Behavioral Theory
3.7 Birds Triangle
Summary

3
INTRODUCTION
.
When an accident occurs at the workplace, employers tend to
claim that it is due to the negligence of workers.

- Is the negligence of workers the cause of workplace accidents?
- What are the effects of workplace accidents?
- Have you ever wondered how accidents occur and what are their
main causes?

Years ago, several theories of accident causation had been
established to explain why accidents occur.

Models based on these theories were used to predict and prevent
accidents from occurring.
4
3.1 DOMINO THEORY
.
The Domino Theory was introduced by Herbert W. Heinrich
(Figure Below) after studying the reports of 75,000 industrial
accidents.

From the study, he concluded that:
88% of industrial accidents were caused by unsafe acts
committed by fellow workers
10% of industrial accidents were caused by unsafe
conditions; and
2% were unavoidable.
5
3.1 DOMINO THEORY
.
Examples of unsafe acts committed by fellow workers included being
negligent and not observing safety procedures.

Examples of unsafe working conditions are:
- working in high-rise buildings without proper safety gears and
equipment,
- the use of faulty or improperly insulated electrical appliances.

On the other hand, unavoidable accidents include:
- Floods
- storms and
- accidents caused by other individuals.
6
.
Heinrich outlined 10 axioms known as the Axioms of Industrial
Safety which must be adhered to by managers when managing
occupational safety and health aspects at the workplace.
No. Axioms
1.

The occurrence of an injury invariably results from a completed sequence of
factors, the last one of these being the accident itself.

2.

The accident in turn is invariably caused or permitted directly by the unsafe
act of a person and/or a mechanical or physical hazard.

3. Most industrial accidents are caused by unsafe acts committed by humans.

4. An unsafe act or condition will not necessarily cause an accident or injury.

5.

The excuse given for committing an unsafe act can be an indicator or lesson
to do the right act.

7
.
Heinrich outlined 10 axioms known as the Axioms of Industrial
Safety which must be adhered to by managers when managing
occupational safety and health aspects at the workplace.
No. Axioms
6.

The seriousness of an accident cannot be planned or anticipated but what
is for sure is that the accident can be avoided.

7.

The best accident prevention techniques are analogous with the best
quality and productivity techniques.

8.

Management should assume responsibility for safety due to its high
position in the organizational hierarchy and because it is in the best
position to get results.

9. The supervisor is the key person in the prevention of industrial accidents.

10.

In addition to the direct costs of an accident (e.g. compensation, liability
claims, medical costs and hospital expenses), there are also hidden and
indirect costs.
8
.
According to Heinrich, there are five factors in the sequence of
events leading up to an accident.
Heinrich proposed a 5-factor accident sequence in his theory.
9
.
The sequence of accident factors are summarized in Table below:
No. Factor Explanation
1. Ancestry and
Social
Environment
The negative character traits that may lead
people to behave in an unsafe manner may
be inherited (ancestral) or acquired as a
result of the social environment.

2. Fault of Person
Negative character traits whether inherited
or acquired are the reasons behind why
people behave in an unsafe manner and why
hazardous conditions exist (e.g. smoking in
an area which contains flammable materials).
10
.
The sequence of accident factors are summarized in Table below:
No. Factor Explanation
3.
Unsafe Act /
Mechanical &
Physical Hazards
Unsafe acts committed by a person and
mechanical or physical hazards are the direct
causes of accidents (e.g. negligence).
4. Accident Typically, accidents lead to injuries and will
have a negative effect on the performance
and image of organisations.
5. Injury Accident injuries may range from minor cuts
and scratches to serious ones such as loss of a
limb or other disability. Injuries such as
lacerations and fractures have a negative
effect on workers performance.
11
.
Heinrichs theory has 2 central points:

(a) Injuries are caused by the actions of preceding factors; and

(b) Removal of the central factor negates the actions of preceding
factors and in doing so, prevents accidents and injuries.

- However, the weakness of this theory is that not all accident
factors are inherited.
- Accidents may occur due to negligence and mechanical failure.
12
3.2 HUMAN FACTORS THEORY
.
13
3.2.1 Overload
.
These factors are explained in detail in the following sub-topics.
.
Overload is amounts to an imbalance between a person's capacity
at any given time and the load being carried by a person in a given
state.

Refer to Figure below to see how work stress can be a human
factor in workplace accidents.

The figure illustrates how a worker who is experiencing chronic
work stress has a greater chance to suffer from illnesses such as
mental stress which, in turn, may cause an undesirable incident to
occur
14
3.2.1 Overload
.
.
A person's capacity is the combination of qualities such as his:
-natural ability
- training
- state of mind
- stress and;
- physical condition.

The load that a person is carrying consists of tasks for which he is
responsible, and other added burdens resulting from factors such as:
(a) Environmental factors (noise, distractions, and so on);
(b) Internal factors (personal problems, emotional stress, and worry);
and;
(c) Situational factors (level of risk, unclear instructions, and so on).

The state in which a person is acting is the product of his motivational
and arousal levels.
15
.
.
3.2.1 Overload
A person's capacity is the combination of qualities such as his:
-natural ability
- training
- state of mind
- stress and;
- physical condition.

The load that a person is carrying consists of tasks for which he is
responsible, and other added burdens resulting from factors such as:
(a) Environmental factors (noise, distractions, and so on);
(b) Internal factors (personal problems, emotional stress, and worry);
and;
(c) Situational factors (level of risk, unclear instructions, and so on).

The state in which a person is acting is the product of his motivational
and arousal levels.
16
.
How a person responds in a given situation can cause or prevent
an accident.

If a person detects a hazardous condition but does nothing
to rectify it, he has responded inappropriately.

For example, workers at a construction site must wear hard hats
and observe all other safety measures laid down by the
management.
17
.
If a person removes a safeguard from a machine in an effort to
increase output, he has responded inappropriately.

Again, if a person disregards an established safety procedure, he
has responded inappropriately.

Such responses can lead to accidents.

In addition to inappropriate responses, an unsuitable workplace
or work environment can also contribute to accidents.
18
.
The unsuitability of a person's workplace with regard to;
- Physical size of the facilities available
- Force
- Reach
- Feel &
- Similar factors can lead to accidents and injuries.
19
.
Human error can be the result of inappropriate activities.

An example is the undertaking of a task that a person does not
know or not familiar with.

Another example is misjudging the degree of risk involved in a
given task.

Such inappropriate activities can lead to accidents and injuries.
20
.
To help you understand this theory, please refer to Figure below
21
3.3 ACCIDENT/INCIDENT THEORY

.
The accident/incident theory is an extension of the human factors
theory.

It was developed by Dan Petersen and is sometimes referred to
as the Petersen accident/incident theory.

Petersen introduced such new elements as ergonomic traps, the
decision to err, and systems failures.
22

.
23

.
In this model, overload, ergonomic traps, or a decision to err may
lead to human error.

The decision to err may be conscious and based on logic, or it may
be unconscious.
A variety of pressures such as tight deadlines, peer pressure, and
budget factors can lead to unsafe behaviors'.

Another factor that can influence such a decision is the "It won't
happen to me" syndrome.
24

.
The systems failure component is an important contribution of
Petersen's theory.

1st, it shows the potential for a causal relationship between
management decisions or management behavior, and safety.

2nd, it establishes management's role in accident prevention as
well as the broader concepts of safety and health in the workplace.
25

.
Systems failure is normally caused by several acts or approaches
which do not fulfils the requirements of occupational safety and
health such as the following:

(a) Management does not establish a comprehensive safety policy;

(b) Responsibility and authority with regard to safety are not clearly
defined;

(c) Safety procedures such as measurement, inspection,
correction, and investigation are ignored or given insufficient
attention;

(d) Employees do not receive proper orientation; and

(e) Employees are not given sufficient safety training.
26
3.4 EPIDEMIOLOGICAL THEORY

.
Traditionally, safety theories and programs have focused on accidents
and the resulting injuries.

However, the current trend is towards a broader perspective that
also encompasses the issue of industrial hygiene.

Industrial hygiene concerns environmental factors that, if not
addressed properly, can lead to sickness, disease, or other forms of
health impairment.

This trend has, in turn, led to the development of an epidemiological
theory of accident causation
27

.
28

.
The epidemiology theory model
Source: Geotsh. D. L. (2005)
29

.
Figure above illustrates the epidemiological theory of accident
causation.

The key components are predisposition characteristics and
situational characteristics.

These characteristics, taken together, can either result in or prevent
conditions that may result in an accident.
30

.
For example,:

If an employee who is particularly susceptible to peer pressure
(predisposition characteristic) is pressured by his co-workers
(situational characteristic) to speed up his operation,

a decision that might lead to carelessness and the result will
be an increased probability of a workplace accident.
31
3.5 SYSTEMS THEORY

.
Are systems components interrelated?

Can these elements, combined as a unified whole, cause accidents?

The systems model is a model developed by R.J. Firenzie.

A system is a group of regularly interacting and interrelated
components that together form a unified whole.

This definition is the basis for the systems theory of accident
causation.
32
3.5 SYSTEMS THEORY

.
The likelihood of an accident occurring is determined by how these
components interact in performing a task.

For example, a numerically controlled five-axis machining centre in
a shop is usually operated by an experienced employee.

When she goes on a two-week vacation, her temporary
replacement may be someone less experienced.

This situation may lead to accidents.
33
3.5 SYSTEMS THEORY

.
This change in one component of the system (person/host)
increases the probability of an accident.

Such a simple example is easily understood.

However, not all changes in patterns of interaction are this simple.

Some are so subtle that their analysis may require a team of
people, each with a different type of expertise, to scrutinize the
situation and learn where the problems lie.
34
3.5 SYSTEMS THEORY

.
The primary components of the systems model are the person /
machine/environment, information, decisions, risks, and the task to
be performed. Each of the components has a bearing on the
probability that an accident will occur. This model is shown in Figure
below:
35
3.5 SYSTEMS THEORY

.
As this model shows, even as a person interacts with a machine
within an environment, 3 activities take place between the system
and the task to be performed.

Every time a task is performed, there is the risk that an accident may
occur.

Sometimes the risks are great; at other times, they are small.

This is where information collection and decision making come in.
36
3.5 SYSTEMS THEORY

.
Based on the information that has been collected by observing and
mentally noting the current circumstances, the person weighs the
risks and decides whether to perform the task under existing
circumstances.

For example, say a machine operator is trying to fulfill a rush order
that is behind schedule.

An important safety device has malfunctioned on his machine,
hampering normal operation.

Simply taking it off will interrupt work for only five minutes, but
doing so will also increase the probability of an accident, as there is
now less safeguarding.
37
3.5 SYSTEMS THEORY

.
However, replacing the faulty safety device could take up to an
hour.

Should the operator remove the safety guard and proceed with
the task or take the time to replace it?

The operator and his supervisor may assess the situation (collect
information), weigh the risks, and make a decision to
proceed.

If their information was right and their assessment of the risks
accurate, the task will probably be accomplished without an
accident.
38
3.5 SYSTEMS THEORY

.
However, the environment in which the machine operator is
working is unusually hectic, and the pressure to complete an order
that is already behind schedule is intense.

These factors are stressors that can cloud the judgment of
those collecting information, weighing risks, and making the
decision.

When stressors are introduced between points 1 and 3 in Figure
Feedback Loop, the likelihood of an accident increases.
39
3.5 SYSTEMS THEORY

.
For this reason, Firenzie recommended that 5 factors be considered
before beginning the process of collecting information, weighing
risks, and making a decision.

These 5 factors are:
(a) Job requirements;

(b) The workers' abilities and limitations;

(c) The gain if the task is successfully accomplished;

(c) The loss if the task is attempted but fails; and

(e) The loss if the task is not attempted.

40
3.5 SYSTEMS THEORY

.

These 5 factors can help a person achieve the proper perspective;
- before collecting information,
- weighing risks, and
- making a decision.

It is particularly important to consider these factors when
stressors such as
- noise,
- time constraints, or
- pressure from a supervisor may tend to cloud one's judgment.

41
3.6 BEHAVIORAL THEORY

.
The behavioral theory of accident causation and prevention is often
referred to as behavior-based safety, introduced by E. Scott Geller
(2001) (Figure below).

Behavior-based safety is the application of behavioral theories from
the field of psychology to the field of occupational safety.
E. Scott Geller
42

.
The following is the definition of the behavioral theory.
43

.
According to Geller, there are 7 basic principles of behavioral theory.
These theories are explained in Table below.
No. 7 Basic Principles of Behavioral Theory
1. Intervention that is focused on employee behavior;
2.

Identification of external factors that will help understand and improve
employee behavior (from the perspective of safety in the workplace);
3.
Direct behavior with activators or events antecedent to the desired behavior,
and motivation of the employee to behave as desired with incentives and
rewards that will follow the desired behavior;
4.

Focus on the positive consequences that will result from the desired
behavior as a way to motivate employees;
5.

Application of the scientific method to improve attempts at behavioral
interventions;
6. Use of theory to integrate information rather than to limit possibilities; and
7.

Planned interventions with the feelings and attitudes of the individual
employee in mind.
44

.
For example,

workers are shown a video on positive and negative attitudes
towards wearing safety hard hats.

If a worker does not wear the safety hat, he has made a mistake
and may get injured due to falling objects.

The consequences of the behavior is C, while wearing the hat or
failure to wear the hat is B, and the video show is A (i.e. the
antecedents to the behavior).
45

.
There is often a degree of difference between any theory of accident
causation and reality.

The various models presented with their corresponding theories in
this topic attempt to explain why accidents occur.

For some accidents, a given model may be very accurate. For others,
it may be less so.

Often, the cause of an accident cannot be adequately explained by
just one model or theory.
46

.
Thus, according to combination theory, the actual cause may
combine parts of several different models.

Safety personnel should use these theories as appropriate both
for accident prevention and accident investigation.

However, they should avoid the tendency to try to apply one model
to all accidents.
47
3.7 BIRDS TRIANGLE

.
Frank Bird, an expert on accident loss control, showed a
relationship between major, minor and no-injury accidents. His
study is shown in Figure below.

He found that all near miss accidents must be
investigated and analyzed immediately.

The necessary actions must be taken as near miss accidents which
occurred yesterday could become a serious accident tomorrow
(Stranks, 2003).
48
3.7 BIRDS TRIANGLE

.
In fact, according to Bird, near miss accidents tend to lead employers
to be careless and be overconfident because there are no injuries
or damage to properties.

As a result, employers will tend to ignore such near misses.

Such attitude will lead to the next level,

i.e. damage to properties, minor injuries, and if still unchecked, then
to the next level which involves serious or permanent injuries as
explained by the 600:30:10:1 formula in next figure.
49
3.7 BIRDS TRIANGLE

.
Birds triangle
Source: Stranks (2003)
50
SUMMARY

.
Based on the discussion above, there are several theories, which
can be used to explain the cause of, or factors leading to accidents.
Among these factors are:
(a) Human error factor;
(b) Unsafe workplace;
(c) Ergonomic factor; and
(d) Systems failure and others.

In brief, workplace accidents can occur due to a combination
of several factors that interact with one another and not merely
due to a single factor.

Managers must be able to identify factors leading to accidents in
order to prevent or reduce them.
51
Thank You

Accident Causations Safety Theories

Uploaded by

Copyright:

Available Formats

Accident Causations Safety Theories

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Accident Causations Safety Theories

Uploaded by

Copyright:

Available Formats

What are some of the major theories of accident causation discussed?

What are Heinrich's Industrial Safety Principles?

TOPIC 3 ACCIDENT CAUSATION THEORIES

You might also like