Figure 4-1

Points and Lines.

2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-2
Angles.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-3
Triangles.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-4
Quadrilaterals.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-5
Regular Polygons.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-6
The Circle.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Solids.
Figure 4-7
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-7.1
Examples of Solids Created with CAD. Courtesy of SolidWorks Corporation.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Bisecting a Line or a Circular Arc (4.8).
Figure 4-8
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Bisecting a Line with Triangle and T-square (4.9).
Figure 4-9
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Bisecting an Angle (4.10).
Figure 4-10
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Transferring an Angle (4.11).
Figure 4-11
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Line Through a Point Parallel to a Line (4.12).
Figure 4-12
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Line Parallel to a Line at a Given Distance (4.13).
Figure 4-13
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Dividing a Line into Equal Parts (4.14).
Figure 4-14
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Dividing a Line into Equal Parts (4.14).
Figure 4-15
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Practical Applications of Dividing a Line into Equal Parts (4.14).
Figure 4-16
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Dividing a Line into Proportional Parts (4.15).
Figure 4.17
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Line Through a Point and Perpendicular to a Line (4.16).
Figure 4-18
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Triangle with Sides Given (4.17).
Figure 4-19
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Right Triangle (4.18).
Figure 4-20
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Laying Out Angles (4.19).
Figure 4-21
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Equilateral Triangle (4.20).
Figure 4-22
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Square (4.21).
Figure 4-23
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Pentagon (4.22).
Figure 4-24
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Hexagon (4.23).
Figure 4-25
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Hexagon (4.23).
Figure 4-26
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Hexagon (4.23).
Figure 4-27
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Octagon (4.24). Photo by Laima Druskis.
Figure 4-28
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Transferring a Plane Figure (4.25).
Figure 4-29
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Transferring a Symmetrical Half (4.26).
Figure 4-30
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Enlarging or Reducing (4.27).
Figure 4-31
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Finding Center of Circle (4.28 and 4.29).
Figure 4-32
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Circle Tangent to a Line (4.30).
Figure 4-33
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Tangent to a Circle Through a Point (4.31).
Figure 4-34
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing Tangents to Two Circles (4.32).
Figure 4.35
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Tangents (4.33).
Figure 4-36
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Tangent Arc in a Right Angle (4.34).
Figure 4-37
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing Tangent Arcs (4.35).
Figure 4-38
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Arc Tangent to an Arc and a Straight Line (4.36).
Figure 4-39
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Arc Tangent to Two Arcs (4.37).
Figure 4-40
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Arc Tangent to Two Arcs and Enclosing One or Both (4.38).
Figure 4-41
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Series of Tangent Arcs Conforming to a Curve (4.39).
Figure 4-42
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Ogee Curve (4.40).
Figure 4-43
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing Two Curves Tangent to Three Intersecting Lines (4.41).
Figure 4-44
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Rectifying Circular Arcs (4.42 and 4.43).
Figure 4-45
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Conic Sections (4.44).
Figure 4-46
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Ellipse Constructions (4.45).
Figure 4-47
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Foci Ellipse (4.46).
Figure 4-48
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Figure 4-48.1
Courtesy of DaimlerChrysler AG.
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Trammel Ellipse (4.47).
Figure 4-49
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Concentric-Circle Ellipse (4.48).
Figure 4-50
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Oblique-Circle Ellipse (4.49).
Figure 4.51
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Parallelogram Ellipse (4.50).
Figure 4-52
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Finding the Axes of an Ellipse (4.51).
Figure 4-53
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Tangents to an Ellipse (4.52).
Figure 4-54
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Using the Ellipse Template (4.53).
Figure 4.55
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing an Approximate Ellipse (4.54).
Figure 4-56
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Parabola (4.55).
Figure 4-57
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Parabola (4.55).
Figure 4-58
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Parabolic Curves (4.56).
Figure 4-59
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Drawing a Hyperbola (4.57).
Figure 4-60
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Equilateral Hyperbola (4.58).
Figure 4-61
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Spiral of Archimedes (4.59).
Figure 4-62
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Helix (4.60).
Figure 4-63
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Involutes (4.61).
Figure 4-64
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Cycloid (4.62).
Figure 4-65
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Epicycloid and Hypocycloid (4.63).
Figure 4-66
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
Geometric Shapes and Surfaces Produced with TRI-CAD System. Courtesy of Lodgrafix, Inc. (4.64).
Figure 4-67
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Probs. 4-14.4) Geometric Constructions. Layout A2 or A42 (adjusted).
Figure 4-68
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.52) Spanner.
Figure 4-69
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.53) Rocker Arm.
Figure 4-70
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.54) Outside Caliper.
Figure 4-71
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.55) Special Cam.
Figure 4-72
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.56) Boiler Stay.
Figure 4-73
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.57) Shaft Hanger Casting.
Figure 4-74
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.58) Shift Lever.
Figure 4-75
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.59) Gear Arm.
Figure 4-76
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.60) Form Roll Lever.
Figure 4-77
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.61) Press Base.
Figure 4-78
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.62) Special S-Wrench.
Figure 4-79
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e
(Prob. 4.63) Photo Floodlight Reflector.
Figure 4-80
2003, Prentice-Hall, Inc.
Giesecke
Technical Drawing, 12e