Scribd
Upload
29 views3 pages

Cutting Fluids

Now in orthogonal cutting the width of the chip equals to the width of the cut. Considering the specific gravity of the metal as constant, the volume of the chip produced will be equal to the volume of the metal cut. Widths of both being equal, the product of the chip thickness and its length will therefore, be equal to the product to the thickness and the length of the metal cut. If L1, L2 are the lengths of the metal cut and the chip respectively, it follows that:

Uploaded by

Agnivesh Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views3 pages

Cutting Fluids

Now in orthogonal cutting the width of the chip equals to the width of the cut. Considering the specific gravity of the metal as constant, the volume of the chip produced will be equal to the volume of the metal cut. Widths of both being equal, the product of the chip thickness and its length will therefore, be equal to the product to the thickness and the length of the metal cut. If L1, L2 are the lengths of the metal cut and the chip respectively, it follows that:

Uploaded by

Agnivesh Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Generated by CamScanner

Generated by CamScanner
Generated by CamScanner

You might also like