Scribd
Upload
208 views

Feeder Diameter Loss (DB/FT) Loss (DB/M) Rel - Velocity Delay M/ns Delay Ft/ns

This document contains information about different feeder types for transmitting radio signals, including their diameter, loss in dB per foot and meter, relative velocity, and delay. It also includes calculations for total feeder loss, system loss, maximum transmit power, and common pilot channel power based on a given feeder length and transmitter power specifications.

Uploaded by

rogerteh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
208 views

Feeder Diameter Loss (DB/FT) Loss (DB/M) Rel - Velocity Delay M/ns Delay Ft/ns

This document contains information about different feeder types for transmitting radio signals, including their diameter, loss in dB per foot and meter, relative velocity, and delay. It also includes calculations for total feeder loss, system loss, maximum transmit power, and common pilot channel power based on a given feeder length and transmitter power specifications.

Uploaded by

rogerteh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Feeder Diameter Loss (dB/ft) Loss (dB/m) Rel.

Velocity
1 LDF4-50A
1/2"
0.0325
0.107
0.88
2 AVA5-50
7/8"
0.0154
0.0504
0.91
3 VXL6-50
1 1/4"
0.01336
0.0438
0.88
4 LDF6-50
1 1/4"
0.0122
0.04
0.89
5 AVA7-50
1 5/8"
0.0093
0.0305
0.92
UL

Feeder Length =

77.4

MaxTxPwr
MaxTxPwr

delay ft/ns
0.866
0.896
0.866
0.876
0.906

meters

Feeder Loss = Feeder length x Feeder Type loss/meter


Feeder Loss =
77.4
X
3.39 dB
Total System Loss =
5.39
=

delay m/ns
0.264
0.273
0.264
0.267
0.276

Feeder Loss
3.39

+
+

= Total Power
=
460
=
406 dBm or

0.0438 dB/meter

interconnect loss
2 dB
Total Loss
53.90
11507.69

MaxDLCapability = MaxTxPwr - 5
MaxDLCapability =
401 dBm (0.1 dB steps)
CPICH Calculation (8-10% of MaxTxPwr)
CPICH =
1150.77 mW (@10%)
30.61 dBm
306 dBm (0.1 steps)

(0.1 dB steps)
mW

Diameter Loss (dB/ft) Loss (dB/m) Rel.Velocity delay m/ns delay ft/ns
1/2"
0.0325
0.107
0.88
0.264
0.866
7/8"
0.0168
0.0553
0.91
0.273
0.896
1 1/4"
0.0152
0.0498
0.88
0.264
0.866
1 1/4"
0.0135
0.0442
0.89
0.267
0.876
1 5/8"
0.0102
0.0336
0.92
0.276
0.906
DL

Formula:

10 Log10 (mW) = dBm


10^(dBm/10) = mW

Inter-connect loss = 2dB


T-Mobile Power Amp (total power) = 40 Watts = 46dBm
Typical T-Mobile CPICH recommendation = MaxTxPwr - 110

You might also like