Scribd
Upload
21 views

Introduction To Finite Element Modeling

The document introduces finite element modeling which is a discretization technique used in structural mechanics. It breaks structures down into simple elements that are then assembled to approximate the response of the overall structure. The document outlines the basic concepts and objectives of finite element modeling including understanding the fundamental ideas, being able to prepare suitable models, and interpreting results while being aware of limitations.

Uploaded by

Madiha__Jabbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Introduction To Finite Element Modeling

The document introduces finite element modeling which is a discretization technique used in structural mechanics. It breaks structures down into simple elements that are then assembled to approximate the response of the overall structure. The document outlines the basic concepts and objectives of finite element modeling including understanding the fundamental ideas, being able to prepare suitable models, and interpreting results while being aware of limitations.

Uploaded by

Madiha__Jabbar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Introduction to Finite Element Modeling

Engineering analysis of mechanical systems have been addressed by deriving differential


equations relating the variables of through basic physical principles such as equilibrium,
conservation of energy, conservation of mass, the laws of thermodynamics, Maxwell's
equations and Newton's laws of motion. However, once formulated, solving the resulting
mathematical models is often impossible, especially when the resulting models are non-
linear partial differential equations. Only very simple problems of regular geometry such
as a rectangular of a circle with the simplest boundary conditions were tractable.
The finite element method (FEM) is the dominant discretization technique in structural
mechanics. The basic concept in the physical interpretation of the FEM is the subdivision
of the mathematical model into disjoint (non-overlapping) components of simple
geometry called finite elements or elements for short. The response of each element is
expressed in terms of a finite number of degrees of freedom characterized as the value of
an unknown function, or functions, at a set of nodal points.
The response of the mathematical model is then considered to be approximated by that of
the discrete model obtained by connecting or assembling the collection of all elements.
The disconnection-assembly concept occurs naturally when examining many artificial
and natural systems. For example, it is easy to visualize an engine, bridge, building,
airplane, or skeleton as fabricated from simpler components. Unlike finite difference
models, finite elements do not overlap in space.
Objectives of FEM in this Course
Understand the fundamental ideas of the FEM
Know the behavior and usage of each type of elements covered in this course
Be able to prepare a suitable FE model for structural mechanical analysis
problems
Can interpret and evaluate the quality of the results (know the physics of the
problems)
Be aware of the limitations of the FEM (don't misuse the FEM - a numerical tool)
Finite Element Analysis
A typical finite element analysis on a software system requires the following information:
1. Nodal point spatial locations (geometry)
2. Elements connecting the nodal points
3. Mass properties
4. Boundary conditions or restraints
5. Loading or forcing function details
6. Analysis options

You might also like