Scribd
Upload
39 views1 page

Spreadsheet For Sign Structure - Base Plate

Spreadsheet for Sign Structure_Base Plate

Uploaded by

rasputin0780803494
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views1 page

Spreadsheet For Sign Structure - Base Plate

Spreadsheet for Sign Structure_Base Plate

Uploaded by

rasputin0780803494
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

6/9/2014

11:15 AM
BASE PLATE AND ANCHOR BOLTS
Project: FOR EDUCATION ONLY; NOT TO BE USED FOR COMMERCIAL WORK.
Descript: DESCRIPTION
Ref: AISC Steel Design Guide Series 1 (1990), Column Base Plates
Plate Design
# of Base Plates= 0
Maximum Column Dimension, OD= 0.00 in, perpendicular to sign face
Number of Bolts, n= 2 per line front and back
Compressive Strength of Concrete, f'c= 2,500 psi at 28 days
Moment / Base Plate, M= #DIV/0! lb-ft
Bolt Line Spacing, L= 4.00 in, from front to back
Base Plate Dimensions: N= 8.00 in B= 8.00 in
Tension per Bolt Line, T= #DIV/0! lb, = M/L (simple moment couple)
Maximum Moment on the Plate, Mpl= #DIV/0! lb-in, = (T)((L-OD)/2)
Plate Thickness w/o Gussets, t= #DIV/0! in, = Sqrt((6M)/(0.75Fy(4/3) Beff))
Anchor Bolt Design
(using A36 threaded rod with embeded end nut)
Tension per Anchor, Ta= #DIV/0! lb, = T/n
Req. Gross Area of Anchor Bolts, Ag= #DIV/0! sq in, = Ta\0.33Fu (1/3 inc)
Min. Diameter of Anchor Bolts, D= #DIV/0! in
Actual Bolt Diameter to be Used= 0.000 in
Req Proj Concrete Surface Area, Ap= #DIV/0! sq in, = Ta/(2 sqrt(f'c)) (1/3 inc)
Req Embeded Bolt Length, L= #DIV/0! in, = sqrt(Ap/3.14), min 20D
Min. Spacing to Edge of Concrete= #DIV/0! in
Min. Spacing Between Bolts in a Line,s= #DIV/0! in, = 2L
Actual Spacing Between Bolts in a Line, s= 0.00 in
# of Overlaps= 1
Revised Ap Based on Overlap= #DIV/0! in^2
Actual Shear Capacity of Concrete Cone= #DIV/0! lb (1/3 inc) #DIV/0!
Shear stress per bolt, fv= #DIV/0! psi, = Va/Ab
Allowed Tension Stress with Shear, Ft= #DIV/0! psi, = 0.43Fu - 1.8fv, max 0.33Fu (1/3 inc)
Actual Tension Stress per Bolt, ft= #DIV/0! psi, = Ta/Ab
#DIV/0!
Weld Design
(check connection of base column to plate, pipe and square tube only)
Shape of Column= (R=round, S=square)
Fillet Weld Leg Size, a= in
Section Modulus of Weld, Sw= 0.00 in3, = 1.34(b^2)(a)
Actual Weld Stress, fw= #DIV/0! psi, = M/Sw #DIV/0!

You might also like