Scribd
Upload
83 views1 page

2884 DSL 2750U Configuration Guide

This document provides configuration guides for setting up an ADSL, fiber optic, or broadband internet connection on a DSL-2750U router. The ADSL connection requires setting the VPI and VCI values, selecting the connection type (PPPoE or PPPoA), and inputting your ISP username and password. The fiber optic connection requires selecting PPP over Ethernet and inputting your ISP username and password. The broadband connection requires selecting IP over Ethernet, enabling NAT, and inputting your ISP username and password. All connections require accessing the router admin page, configuring the layer 2 interface, configuring the WAN service, and saving the settings.

Uploaded by

Mohammad Monshizadeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
83 views1 page

2884 DSL 2750U Configuration Guide

This document provides configuration guides for setting up an ADSL, fiber optic, or broadband internet connection on a DSL-2750U router. The ADSL connection requires setting the VPI and VCI values, selecting the connection type (PPPoE or PPPoA), and inputting your ISP username and password. The fiber optic connection requires selecting PPP over Ethernet and inputting your ISP username and password. The broadband connection requires selecting IP over Ethernet, enabling NAT, and inputting your ISP username and password. All connections require accessing the router admin page, configuring the layer 2 interface, configuring the WAN service, and saving the settings.

Uploaded by

Mohammad Monshizadeh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DSL-2750U CONFIGURATION GUIDE

For ADSL Connection


1. Open Internet Explorer and type
http://192.168.1.1 on the address bar. Type
adminon both the username and password
field.
2. Click Advanced Setup > Layer 2 Interface >
ATM interface. Click Add.
3. Under ATM PVC Configuration set the
following:
VPI=0
VCI=50
DSL Link Type= select EOA for PPPoE otherwise
select PPPoA (call ISP to verify your connection
type and VCI-VPI values)
Encapsulation: LLC/Encapsulation

Click Apply/Save

4. Click Advanced Setup > WAN Service. Click
Next

5. Type the username and password from
Etisalat.

6. Under routing- Default Gateway, click next.

7. Under DNS Server Configuration, click next.

8. Under WAN/ Setup Summary, click Apply/
Save.


For Fiber Optic Connection
1. Open Internet Explorer and type
http://192.168.1.1 on the address bar. Type
adminon both the username and password
field.
2. Click Advanced Setup > Layer 2 Interface >
ETH interface. Click Add.
3. Under ETH WAN configuration, select Default
Mode. Click Apply/ Save
4. Click Advanced Setup > WAN Service. Click
Next.
5. Under WAN Service configuration, select PPP
over Ethernet, click next.
6. Under PPP Username and password, type
the username and password provided by your
ISP. Click next.
6. Under routing- Default Gateway, click next.

7. Under DNS Server Configuration, click next.

8 . Under WAN/ Setup Summary, click Apply/
Save.

For Broadband Connection
1. Open Internet Explorer and type
http://192.168.1.1 on the address bar. Type
adminon both the username and password
field.
2. Click Advanced Setup > Layer 2 Interface >
ETH interface. Click Add.
3. Under ETH WAN configuration, select Default
Mode. Click Apply/ Save
4. Click Advanced Setup > WAN Service. Click
Next.
5. Under WAN Service configuration, select IP
over Ethernet, click next.
6. Under WAN/ IP Settings click next.
7. Under Network Address Translation, select
Enable NAT, click next.
8. Under routing- Default Gateway, click next.

9. Under DNS Server Configuration, click next.

10. Under WAN/ Setup Summary, click Apply/
Save.

You might also like