The document discusses computer aided simulation and analysis lab at Rajalakshmi Engineering College. It provides an introduction to finite element analysis (FEA) and how it is used by design engineers. It explains how FEA fits within the design process and its advantages over traditional methods that rely on physical prototypes.
The document discusses computer aided simulation and analysis lab at Rajalakshmi Engineering College. It provides an introduction to finite element analysis (FEA) and how it is used by design engineers. It explains how FEA fits within the design process and its advantages over traditional methods that rely on physical prototypes.
The document discusses computer aided simulation and analysis lab at Rajalakshmi Engineering College. It provides an introduction to finite element analysis (FEA) and how it is used by design engineers. It explains how FEA fits within the design process and its advantages over traditional methods that rely on physical prototypes.
The document discusses computer aided simulation and analysis lab at Rajalakshmi Engineering College. It provides an introduction to finite element analysis (FEA) and how it is used by design engineers. It explains how FEA fits within the design process and its advantages over traditional methods that rely on physical prototypes.
Download as DOC, PDF, TXT or read online from Scribd
Download as doc, pdf, or txt
You are on page 1of 98
RAJALAKSHMI ENGINEERING COLLEGE
THANDALAM, CHENNAI- 602105
Department of Mechanical Engineering ME 2404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB MANUAL ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LABORATORY LIST OF EPERIMENTS A! S"#$%&'"() 15 Simulation of Air conitionin! "#"t$m %it& con$n"$r t$m'$ratur$ an $(a'orator t$m'$ratur$" a" in'ut to !$t COP u"in! C )MAT La*+ Simulation of ,#raulic ) Pn$umatic c#lin$r u"in! C ) MAT La*+ Simulation of cam an follo%$r m$c&ani"m u"in! C ) MAT La*+ A)&%*+"+ ,S"#-%. T/.&'#.)' ()%*0 10 Str$"" anal#"i" of a 'lat$ %it& a circular &ol$+ Str$"" anal#"i" of r$ctan!ular L *rac-$t Str$"" anal#"i" of an a.i/"#mm$tric com'on$nt Str$"" anal#"i" of *$am" 0Cantil$($r1 Sim'l# "u''ort$1 2i.$ $n"3 Mo$ fr$4u$nc# anal#"i" of a 5 D com'on$nt Mo$ fr$4u$nc# anal#"i" of *$am" 0Cantil$($r1 Sim'l# "u''ort$1 2i.$ $n"3 ,armonic anal#"i" of a 5D com'on$nt T&$rmal "tr$"" anal#"i" of a 5D com'on$nt Conucti($ &$at tran"f$r anal#"i" of a 5D com'on$nt Con($cti($ &$at tran"f$r anal#"i" of a 5D com'on$nt TOTAL 2 45 LIST OF E3UIPMENTS 0for a *atc& of 60 "tu$nt"3 C(#-$'./ S*+'.# 10 178 9:A Color Monitor P$ntium I9 Proc$""or 40 :B ,DD 5;< MB RAM C(%(/ D.+4 J.' P/")'./ 01 S(5'6&/. ANSYS 9$r"ion 7 or lat$"t 1; lic$n"$" C ) MATLAB 1; lic$n"$" 5 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC LIST OF EERCISES A)&%*+"+ ,S"#-%. T/.&'#.)' ()%*0 E.+ No= 1 Str$"" anal#"i" of *$am" 0Cantil$($r1 Sim'l# "u''ort$ > 2i.$ $n"3 E.+ No= 5 Str$"" anal#"i" of a 'lat$ %it& a circular &ol$+ E.+ No= 6 Str$"" anal#"i" of r$ctan!ular L *rac-$t E.+ No= 4 Str$"" anal#"i" of an a.i/"#mm$tric com'on$nt E.+ No= ; Mo$ fr$4u$nc# anal#"i" of a 5 D com'on$nt E.+ No= < Mo$ fr$4u$nc# anal#"i" of *$am" 0Cantil$($r1 Sim'l# Su''ort$1 2i.$ $n"3 E.+ No= 7 ,armonic anal#"i" of a 5D com'on$nt E.+ No= ? T&$rmal "tr$"" anal#"i" of a 5D com'on$nt E.+ No= @ Conucti($ &$at tran"f$r anal#"i" of a 5D com'on$nt E.+ No= 10 Con($cti($ &$at tran"f$r anal#"i" of a 5D com'on$nt S"#$%&'"() E.+ No= 11 Simulation of Air conitionin! "#"t$m %it& con$n"$r t$m'$ratur$ an $(a'orator t$m'$ratur$" a" in'ut to !$t COP u"in! C )MAT La*+ E.+ No= 15 Simulation of ,#raulic ) Pn$umatic c#lin$r u"in! C ) MAT La*+ E.+ No= 16 Simulation of cam an follo%$r m$c&ani"m u"in! C ) MAT La*+ 6 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC INTRODUCTION 78&' "+ F")"'. E%.#.)' A)&%*+"+9 2init$ El$m$nt Anal#"i"1 commonl# call$ 2EA1 i" a m$t&o of num$rical anal#"i"+ 2EA i" u"$ for "ol(in! 'ro*l$m" in man# $n!in$$rin! i"ci'lin$" "uc& a" mac&in$ $"i!n1 acou"tic"1 $l$ctroma!n$ti"m1 "oil m$c&anic"1 flui #namic"1 an man# ot&$r"+ In mat&$matical t$rm"1 2EA i" a num$rical t$c&ni4u$ u"$ for "ol(in! fi$l 'ro*l$m" $"cri*$ *# a "$t of 'artial iff$r$ntial $4uation"+ In m$c&anical $n!in$$rin!1 2EA i" %i$l# u"$ for "ol(in! "tructural1 (i*ration1 an t&$rmal 'ro*l$m"+ ,o%$($r1 2EA i" not t&$ onl# a(aila*l$ tool of num$rical anal#"i"+ Ot&$r num$rical m$t&o" inclu$ t&$ 2init$ Diff$r$nc$ M$t&o1 t&$ Bounar# El$m$nt M$t&o1 an t&$ 2init$ 9olum$" M$t&o to m$ntion Au"t a f$%+ ,o%$($r1 u$ to it" ($r"atilit# an &i!& num$rical $ffici$nc#1 2EA &a" com$ to ominat$ t&$ $n!in$$rin! anal#"i" "oft%ar$ mar-$t1 %&il$ ot&$r m$t&o" &a($ *$$n r$l$!at$ to nic&$ a''lication"+ You can u"$ 2EA to anal#B$ an# "&a'$C 2EA %or-" %it& iff$r$nt l$($l" of !$om$tr# i$aliBation an 'ro(i$" r$"ult" %it& t&$ $"ir$ accurac#+ D&$n im'l$m$nt$ into mo$rn comm$rcial "oft%ar$1 *ot& 2EA t&$or# an num$rical 'ro*l$m formulation *$com$ com'l$t$l# tran"'ar$nt to u"$r"+ 78( +8($%: $+. F")"'. E%.#.)' A)&%*+"+9 A" a 'o%$rful tool for $n!in$$rin! anal#"i"1 2EA i" u"$ to "ol($ 'ro*l$m" ran!in! from ($r# "im'l$ to ($r# com'l$.+ D$"i!n $n!in$$r" u"$ 2EA urin! t&$ 'rouct $($lo'm$nt 'roc$"" to anal#B$ t&$ $"i!n/in/'ro!r$""+ Tim$ con"traint" an limit$ a(aila*ilit# of 'rouct ata call for man# "im'lification" of t&$ anal#"i" mo$l"+ At t&$ ot&$r $n of "cal$1 "'$cialiB$ anal#"t" im'l$m$nt 2EA to "ol($ ($r# a(anc$ 'ro*l$m"1 "uc& a" ($&icl$ cra"& #namic"1 &#ro formin!1 or air *a! $'lo#m$nt+ T&i" *oo- focu"$" on &o% $"i!n $n!in$$r" u"$ 2EA a" a $"i!n tool+ T&$r$for$1 %$ fir"t n$$ to $.'lain %&at $.actl# i"tin!ui"&$" 2EA '$rform$ *# $"i!n $n!in$$r" from Er$!ularE 2EA+ D$ %ill t&$n &i!&li!&t t&$ mo"t $""$ntial 2EA c&aract$ri"tic" for $"i!n $n!in$$r" a" o''o"$ to t&o"$ for anal#"t"+ FEA 5(/ D.+";) E);")../+2 &)('8./ :.+";) '((% 2or $"i!n $n!in$$r"1 2EA i" on$ of man# $"i!n tool" amon! CAD1 Protot#'$"1 "'r$a"&$$t"1 catalo!"1 ata *a"$"1 &an calculation"1 t$.t *oo-"1 $tc+ t&at ar$ all u"$ in t&$ $"i!n 'roc$""+ FEA 5(/ D.+";) E);")../+2 <&+.: () CAD #(:.%+ 4 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Mo$rn $"i!n i" conuct$ u"in! CAD tool"1 "o a CAD mo$l i" t&$ "tartin! 'oint for anal#"i"+ Sinc$ CAD mo$l" ar$ u"$ for $"cri*in! !$om$tric information for 2EA1 it i" $""$ntial to un$r"tan &o% to $"i!n in CAD in or$r to 'rouc$ r$lia*l$ 2EA r$"ult"1 an &o% a CAD mo$l i" iff$r$nt from 2EA mo$l+ T&i" %ill *$ i"cu""$ in lat$r c&a't$r"+ FEA 5(/ D.+";) E);")../+2 =()=$//.)' 6"'8 '8. :.+";) -/(=.++ Sinc$ 2EA i" a $"i!n tool1 it "&oul *$ u"$ concurr$ntl# %it& t&$ $"i!n 'roc$""+ It "&oul -$$' u' %it&1 or *$tt$r #$t1 drive t&$ $"i!n 'roc$""+ Anal#"i" it$ration" mu"t *$ '$rform$ fa"t1 an "inc$ t&$"$ r$"ult" ar$ u"$ to ma-$ $"i!n $ci"ion"1 t&$ r$"ult" mu"t *$ r$lia*l$ $($n %&$n limit$ in'ut i" a(aila*l$+ L"#"'&'"()+ (5 FEA 5(/ D.+";) E);")../+ A" #ou can "$$1 2EA u"$ in t&$ $"i!n $n(ironm$nt mu"t m$$t &i!& r$4uir$m$nt"+ An o*(iou" 4u$"tion ari"$"= %oul it *$ *$tt$r to &a($ $icat$ "'$ciali"t '$rform 2EA an l$t $"i!n $n!in$$r" o %&at t&$# o *$"t / $"i!n n$% 'rouct"F T&$ an"%$r $'$n" on t&$ "iB$ of t&$ *u"in$""1 t#'$ of 'rouct"1 com'an# or!aniBation an cultur$1 an man# ot&$r tan!i*l$ an intan!i*l$ factor"+ A !$n$ral con"$n"u" i" t&at $"i!n $n!in$$r" "&oul &anl$ r$lati($l# "im'l$ t#'$" of anal#"i"1 *ut o it 4uic-l# an of cour"$ r$lia*l#+ Anal#"$" t&at ar$ ($r# com'l$. an tim$ con"umin! cannot *$ $.$cut$ concurr$ntl# %it& t&$ $"i!n 'roc$""1 an ar$ u"uall# *$tt$r &anl$ $it&$r *# a $icat$ anal#"t or contract$ out to "'$cialiB$ con"ultant"+ O<>.='"?.+ (5 FEA 5(/ D.+";) E);")../+ T&$ ultimat$ o*A$cti($ of u"in! t&$ 2EA a" a $"i!n tool i" to c&an!$ t&$ $"i!n 'roc$"" from r$'$titi($ c#cl$" of E$"i!n1 'rotot#'$1 t$"tE into "tr$amlin$ 'roc$"" %&$r$ 'rotot#'$" ar$ not u"$ a" $"i!n tool" an ar$ onl# n$$$ for final $"i!n ($rification+ Dit& t&$ u"$ of 2EA1 $"i!n it$ration" ar$ mo($ from t&$ '&#"ical "'ac$ of 'rotot#'in! an t$"tin! into t&$ (irtual "'ac$ of com'ut$r "imulation" 0fi!ur$ 1/13+ ; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/1= Traitional an+ 2EA/ ri($n 'rouct $($lo'm$nt Traditional product development needs prototypes to support design in progress. The process in FEA-driven product development uses numerical models, rather than physical prototypes to drive development. In an FEA driven product, the prototype is no longer a part of the iterative design loop. What is Solid Works Simulation Soli Dor-" Simulation i" a comm$rcial im'l$m$ntation of 2EA1 ca'a*l$ of "ol(in! 'ro*l$m" commonl# foun in $"i!n $n!in$$rin!1 "uc& a" t&$ anal#"i" of $formation"1 "tr$""$"1 natural fr$4u$nci$"1 &$at flo%1 $tc+ Soli Dor-" Simulation ar$""$" t&$ n$$" of $"i!n $n!in$$r"+ It *$lon!" to t&$ famil# of $n!in$$rin! anal#"i" "oft%ar$ 'rouct" $($lo'$ *# t&$ Structural R$"$arc& > Anal#"i" Cor'oration 0SRAC3+ SRAC %a" $"ta*li"&$ in 1@?5 an "inc$ it" inc$'tion &a" contri*ut$ to inno(ation" t&at &a($ &a a "i!nificant im'act on t&$ $(olution of 2EA+ In 1@@; SRAC 'artn$r$ %it& t&$ Soli Dor-" Cor'oration an cr$at$ Soli Dor-" Simulation1 on$ of t&$ fir"t Soli Dor-" :ol Prouct"1 %&ic& *$cam$ t&$ to'/"$llin! anal#"i" "olution for Soli Dor-" Cor'oration+ T&$ comm$rcial "ucc$"" of Soli Dor-" Simulation int$!rat$ %it& Soli Dor-" CAD "oft%ar$ r$"ult$ in t&$ ac4ui"ition of SRAC in 5001 *# Da""ault S#"t$m"1 'ar$nt of Soli Dor-" Cor'oration+ In 50061 SRA Cor'oration" m$r!$ %it& Soli Dor-" Cor'oration+ Soli Dor-" Simulation i" ti!&tl# int$!rat$ %it& Soli Dor-" CAD "oft%ar$ an u"$" Soli Dor-" for cr$atin! an $itin! mo$l !$om$tr#+ Soli Dor-" i" a "oli1 'aram$tric1 f$atur$/ri($n CAD "#"t$m+ A" o''o"$ to man# ot&$r CAD "#"t$m" t&at %$r$ ori!inall# $($lo'$ in a UNIG $n(ironm$nt an onl# lat$r 'ort$ to Dino%"1 Soli Dor-" CAD %a" $($lo'$ "'$cificall# for t&$ Dino%" O'$ratin! S#"t$m from t&$ ($r# *$!innin!+ In "ummar#1 alt&ou!& t&$ &i"tor# of t&$ famil# of Soli Dor-" 2EA < ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 'rouct" at$" *ac- to 1@?51 Soli Dor-" Simulation &a" *$$n "'$cificall# $($lo'$ for Dino%" an ta-$" full a(anta!$ t&i" of $$' int$!ration *$t%$$n Soli Dor-" an Dino%"1 r$'r$"$ntin! t&$ "tat$/of/t&$/art in t&$ $n!in$$rin! anal#"i" "oft%ar$+ Fundamental steps in an FEA pro!ect T&$ "tartin! 'oint for an# Soli Dor-" Simulation 'roA$ct i" a Soli Dor-" mo$l1 %&ic& can *$ on$ 'art or an a""$m*l#+ At t&i" "ta!$1 mat$rial 'ro'$rti$"1 loa" an r$"traint" ar$ $fin$+ N$.t1 a" i" al%a#" t&$ ca"$ %it& u"in! an# 2EA *a"$ anal#"i" tool1 %$ "'lit t&$ !$om$tr# into r$lati($l# "mall an "im'l# "&a'$ $ntiti$"1 call$ finit$ $l$m$nt"+ T&$ $l$m$nt" ar$ call$ Efinit$E to $m'&a"iB$ t&$ fact t&at t&$# ar$ not infinit$"imall# "mall1 *ut onl# r$a"ona*l# "mall in com'ari"on to t&$ o($rall mo$l "iB$+ Cr$atin! finit$ $l$m$nt" i" commonl# call$ m$"&in!+ D&$n %or-in! %it& finit$ $l$m$nt"1 t&$ Soli Dor-" Simulation "ol($r a''ro.imat$" t&$ "olution *$in! "ou!&t 0for $.am'l$1 $formation" or "tr$""$"3 *# a""$m*lin! t&$ "olution" for ini(iual $l$m$nt"+ 2rom t&$ '$r"'$cti($ of 2EA "oft%ar$1 $ac& a''lication of 2EA r$4uir$" t&r$$ "t$'"= Pr$'roc$""in! of t&$ 2EA mo$l1 %&ic& in(ol($" $finin! t&$ mo$l an t&$n "'littin! it into finit$ $l$m$nt" Solution for com'utin! %ant$ r$"ult" Po"t/'roc$""in! for r$"ult" anal#"i" D$ %ill follo% t&$ a*o($ t&r$$ "t$'" $($r# tim$ %$ u"$ Soli Dor-" Simulation+ 2rom t&$ '$r"'$cti($ of 2EA m$t&oolo!#1 %$ can li"t t&$ follo%in! 2EA "t$'"= Builin! t&$ mat&$matical mo$l Builin! t&$ finit$ $l$m$nt mo$l Sol(in! t&$ finit$ $l$m$nt mo$l Anal#Bin! t&$ r$"ult" T&$ follo%in! "u*"$ction" i"cu"" t&$"$ four "t$'" Builin! t&$ mat&$matical mo$l T&$ "tartin! 'oint to anal#"i" %it& Soli Dor-" Simulation i" a Soli Dor-" mo$l+ :$om$tr# of t&$ mo$l n$$" to *$ m$"&a*l$ into a corr$ct an r$a"ona*l# "mall $l$m$nt 7 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC m$"&+ T&i" r$4uir$m$nt of m$"&a*ilit# &a" ($r# im'ortant im'lication"+ D$ n$$ to $n"ur$ t&at t&$ CAD !$om$tr# %ill in$$ m$"& an t&at t&$ 'rouc$ m$"& %ill 'ro(i$ t&$ corr$ct "olution of t&$ ata of int$r$"t1 "uc& a" i"'lac$m$nt"1 "tr$""$"1 t$m'$ratur$ i"tri*ution1 $tc+ T&i" n$c$""it# oft$n r$4uir$" moification" to t&$ CAD !$om$tr#1 %&ic& can ta-$ t&$ form of $f$aturin!1 i$aliBation an)or cl$an/u'1 $"cri*$ *$lo%= It i" im'ortant to m$ntion t&at %$ o not al%a#" "im'lif# t&$ CAD mo$l %it& t&$ "ol$ o*A$cti($ of ma-in! it m$"&a*l$+ Oft$n1 %$ mu"t "im'lif# a mo$l $($n t&ou!& it %oul m$"&1 corr$ctl# Ea" i"E1 *ut t&$ r$"ultin! m$"& %oul *$ too lar!$ an con"$4u$ntl#1 t&$ anal#"i" %oul ta-$ too muc& tim$+ :$om$tr# modifications allo" for a simpler mesh and shorter com'utin! tim$"+ Al"o1 !$om$tr# 'r$'aration ma# not *$ r$4uir$ at allC "ucc$""ful m$"&in! $'$n" a" muc& on t&$ 4ualit# of !$om$tr# "u*mitt$ for m$"&in! a" it o$" on t&$ "o'&i"tication of t&$ m$"&in! tool" im'l$m$nt$ in t&$ 2EA "oft%ar$+ ,a(in! 'r$'ar$ a m$"&a*l$1 *ut not #$t m$"&$ !$om$tr# %$ no% $fin$ mat$rial 'ro'$rti$"+ 0t&$"$ can al"o *$ im'ort$ from a Soli Dor-" mo$l31 loa" an r$"traint"1 an 'ro(i$ information on t&$ t#'$ of anal#"i" t&at %$ %i"& to '$rform+ T&i" 'roc$ur$ com'l$t$" t&$ cr$ation of t&$ mat&$matical mo$l 0fi!ur$ 1/53+ Notic$ t&at t&$ 'roc$"" of cr$atin! t&$ mat&$matical mo$l i" not 2EA/"'$cific+ 2EA &a" not #$t $nt$r$ t&$ 'ictur$+ ? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/5= Builin! t&$ mat&$matical mo$l The process of creating a mathematical model consists of the modification o #A$ geometry %here removing e&ternal fillets', definition of loads, restraint material properties, and definition of the type of analysis %e.g., static' that "e "ish to perform. B$"%:"); '8. 5")"'. .%.#.)' #(:.% T&$ mat&$matical mo$l no% n$$" to *$ "'lit into finit$ $l$m$nt" t&rou!& a 'roc$"" of i"cr$tiBation1 mor$ commonl# -no%n a" m$"&in! 0fi!ur$ 1/63+Loa" an r$"traint" ar$ al"o i"cr$tiB$ an onc$ t&$ mo$l &a" *$$n m$"&$ t&$ i"cr$tiB$ loa" an r$"traint" ar$ a''li$ to t&$ no$" of t&$ finit$ $l$m$nt m$"&+ 2i!ur$ 1/6= Builin! t&$ finit$ $l$m$nt mo$l The mathematical model is discreti(ed into a finite element model. This completes the pre-processing phase. The FEA model is then solved "ith one of the numerical solvers availa)le in Solid Works Simulation Sol(in! t&$ finit$ $l$m$nt mo$l ,a(in! cr$at$ t&$ finit$ $l$m$nt mo$l1 %$ no% u"$ a "ol($r 'ro(i$ in Solid Works Simulation to 'rouc$ t&$ $"ir$ ata of int$r$"t 0fi!ur$ 1/63+ @ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Anal#Bin! t&$ r$"ult" Oft$n t&$ mo"t ifficult "t$' of 2EA i" anal#Bin! t&$ r$"ult"+ Pro'$r int$r'r$tation of r$"ult" r$4uir$" t&at %$ un$r"tan all "im'lification" 0an $rror" t&$# introuc$3 in t&$ fir"t t&r$$ "t$'"= $finin! t&$ mat&$matical mo$l1 m$"&in! it" !$om$tr#1 an "ol(in!+ Errors in FEA T&$ 'roc$"" illu"trat$ in fi!ur$" 1/5 an 1/6 introuc$" una(oia*l$ $rror"+ 2ormulation of a mat&$matical mo$l introuc$" mo$lin! $rror" 0al"o call$ i$aliBation $rror"31 i"cr$tiBation of t&$ mat&$matical mo$l introuc$" i"cr$tiBation $rror"1 an "ol(in! introuc$" num$rical $rror"+ Of t&$"$ t&r$$ t#'$" of $rror"1 onl# i"cr$tiBation $rror" ar$ "'$cific to 2EA+ Mo$lin! $rror" aff$ctin! t&$ mat&$matical mo$l ar$ introuc$ *$for$ 2EA i" utiliB$ an can onl# *$ controll$ *# u"in! corr$ct mo$lin! t$c&ni4u$"+ Solution $rror" cau"$ *# t&$ accumulation of roun/off $rror" ar$ ifficult to control1 *ut ar$ u"uall# ($r# lo%+ A closer look at finite elements M$"&in! "'lit" continuou" mat&$matical mo$l" into finit$ $l$m$nt"+ T&$ t#'$ of $l$m$nt" cr$at$ *# t&i" 'roc$"" $'$n" on t&$ t#'$ of !$om$tr# m$"&$1 t&$ t#'$ of anal#"i"1 an "om$tim$" on our o%n 'r$f$r$nc$"+ Solid Works Simulation off$r" t%o t#'$" of $l$m$nt"= t$tra&$ral "oli $l$m$nt" 0for m$"&in! "oli !$om$tr#3 an "&$ll $l$m$nt" 0for m$"&in! "urfac$ !$om$tr#3+B$for$ 'roc$$in! %$ n$$ to clarif# an im'ortant t$rminolo!# i""u$+ In CAD t$rminolo!# E"oliE $not$" t&$ t#'$ of !$om$tr#= "oli !$om$tr# 0a" o''o"$ to "urfac$ or %ir$ fram$ !$om$tr#31 in 2EA t$rminolo!# it $not$" t&$ t#'$ of $l$m$nt+ Solid elements T&$ t#'$ of !$om$tr# t&at i" mo"t oft$n u"$ for anal#"i" %it& Solid Works Simulation i" "oli CAD !$om$tr#+ M$"&in! of t&i" !$om$tr# i" accom'li"&$ %it& t$tra&$ral "oli $l$m$nt"1 commonl# call$ Et$t"E in 2EA Aar!on+ T&$ t$tra&$ral "oli $l$m$nt" in Solid Works Simulation can $it&$r *$ fir"t or$r $l$m$nt" 0raft 4ualit#31 or "$con or$r $l$m$nt" 0&i!& 4ualit#3+ T&$ u"$r $ci$" %&$t&$r to u"$ raft 4ualit# or &i!& 4ualit# $l$m$nt" for m$"&in!+ ,o%$($r1 a" %$ %ill "oon 'ro($1 onl# &i!& 4ualit# $l$m$nt" "&oul *$ u"$ for an anal#"i" of an# im'ortanc$+ T&$ iff$r$nc$ *$t%$$n fir"t an "$con or$r t$tra&$ral $l$m$nt" i" illu"trat$ in fi!ur$ 1/4+ 10 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1 /4= Diff$r$nc$" *$t%$$n fir"t an "$con or$r t$tra&$ral $l$m$nt" First and the second order tetrahedral elements are sho"n )efore and after deformation. *ote that the deformed faces of the second order element may assume curvilinear shape "hile deformed faces of the first order element must remain fiat. 2ir"t or$r t$tra&$ral $l$m$nt" &a($ four no$"1 "trai!&t $!$"1 an flat fac$"+ T&$"$ $!$" an fac$" r$main "trai!&t an flat aft$r t&$ $l$m$nt &a" $.'$ri$nc$ $formation un$r t&$ a''li$ loa+ 2ir"t or$r t$tra&$ral $l$m$nt" mo$l t&$ lin$ar fi$l of i"'lac$m$nt in"i$ t&$ir (olum$1 on fac$"1 an alon! $!$"+ T&$ lin$ar 0or fir"t or$r3 i"'lac$m$nt fi$l !i($" t&$"$ $l$m$nt" t&$ir nam$= fir"t or$r $l$m$nt"+ If #ou r$call from t&$ M$c&anic" of Mat$rial"1 "train i" t&$ fir"t $ri(ati($ of i"'lac$m$nt+ T&$r$for$1 "train an con"$4u$ntl# "tr$""1 ar$ *ot& con"tant in fir"t or$r t$tra&$ral $l$m$nt"+ T&i" "ituation im'o"$" a ($r# "$($r$ limitation on t&$ ca'a*ilit# of a m$"& con"truct$ %it& fir"t or$r $l$m$nt" to mo$l "tr$"" i"tri*ution of an# r$al com'l$.it#+ To ma-$ matt$r" %or"$1 "trai!&t $!$" an flat fac$" cannot ma' 'ro'$rl# to cur(ilin$ar !$om$tr#1 a" illu"trat$ in fi!ur$ 1/;+ 2i!ur$ 1/;= 2ailur$ of "trai!&t $!$" an flat fac$" to ma' to cur(ilin$ar !$om$tr# 11 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC A detail of a mesh created "ith first order tetrahedral elements. *otice the imprecise element mapping to the hole+ flat faces appro&imate the face of the cylindrical hole. S$con or$r t$tra&$ral $l$m$nt" &a($ t$n no$" an mo$l t&$ "$con or$r 0'ara*olic3 i"'lac$m$nt fi$l an fir"t or$r 0lin$ar3 "tr$"" fi$l in t&$ir (olum$1 alon! lac$"1 an $!$"+ T&$ $!$" an fac$" of "$con or$r t$tra&$ral $l$m$nt" *$for$ an aft$r $formation can *$ cur(ilin$ar+ T&$r$for$1 t&$"$ $l$m$nt" can ma' 'r$ci"$l# to cur($ "urfac$"1 a" illu"trat$ in fi!ur$ 1/<+ E($n t&ou!& t&$"$ $l$m$nt" ar$ mor$ com'utationall# $manin! t&an fir"t or$r $l$m$nt"1 "$con or$r t$tra&$ral $l$m$nt" ar$ u"$ for t&$ (a"t maAorit# of anal#"$" %it& Soli Dor-" Simulation+ 2i!ur$ 1/<= Ma''in! cur($ "urfac$" A detail is sho"n of a mesh created "ith second order tetrahedral elements. Second order elements map "ell to curvilinear geometry. Shell elements B$"i$" "oli $l$m$nt"1 Soli Dor-" Simulation al"o off$r" "&$ll $l$m$nt"+ D&il$ "oli $l$m$nt" ar$ cr$at$ *# m$"&in! "oli !$om$tr#1 "&$ll $l$m$nt" ar$ cr$at$ *# m$"&in! "urfac$"+ S&$ll $l$m$nt" ar$ 'rimaril# u"$ for anal#Bin! t&in/%all$ "tructur$"+ Sinc$ "urfac$ !$om$tr# o$" not carr# information a*out t&ic-n$""1 t&$ u"$r mu"t 'ro(i$ t&i" information+ Similar to "oli $l$m$nt"1 "&$ll $l$m$nt" al"o com$ in raft an &i!& 4ualit# %it& analo!ou" con"$4u$nc$" %it& r$"'$ct to t&$ir a*ilit# to ma' to cur(ilin$ar !$om$tr#1 a" "&o%n in fi!ur$ 1/7 an fi!ur$ 1/?+ A" $mon"trat$ %it& "oli $l$m$nt"1 fir"t or$r "&$ll $l$m$nt" mo$l t&$ lin$ar i"'lac$m$nt fi$l %it& con"tant "train an "tr$"" %&il$ "$con or$r "&$ll $l$m$nt" mo$l t&$ "$con or$r 0'ara*olic3 i"'lac$m$nt fi$l an t&$ fir"t or$r "train an "tr$"" fi$l+ 15 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/7= 2ir"t or$r "&$ll $l$m$nt This shell element mesh "as created "ith first order elements. *otice the imprecise mapping of the mesh to curvilinear geometry. 2i!ur$ 1/?= S$con or$r "&$ll $l$m$nt Shell element mesh created "ith second order elements, "hich map correctly to curvilinear geometry. C$rtain cla""$" of "&a'$" can *$ mo$l$ u"in! $it&$r "oli or "&$ll $l$m$nt"1 "uc& a" t&$ 'lat$ "&o%n in fi!ur$ 1/@+ T&$ t#'$ of $l$m$nt" u"$ $'$n" t&$n on t&$ o*A$cti($ of t&$ anal#"i"+ Oft$n t&$ natur$ of t&$ !$om$tr# ictat$" %&at t#'$ of $l$m$nt "&oul *$ u"$ for m$"&in!+ 2or $.am'l$1 'art" 'rouc$ *# ca"tin! ar$ m$"&$ %it& "oli $l$m$nt"1 %&il$ a "&$$t m$tal "tructur$ i" *$"t m$"&$ %it& "&$ll $l$m$nt"+ 16 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/@= Plat$ mo$l$ %it& "oli $l$m$nt" 0l$ft3 an "&$ll $l$m$nt" The plate sho"n can )e modeled "ith either solid elements %left' or shell elements %right'. The actual choice depends on the particular re,uirements of analysis and sometimes on personal preferences 2i!ur$ 1/101 *$lo%1 'r$"$nt" t&$ *a"ic li*rar# of $l$m$nt" in Soli Dor-" Simulation+ El$m$nt" li-$ a &$.a&$ral "oli1 4uarilat$ral "&$ll or ot&$r "&a'$" ar$ not a(aila*l$ in Soli Dor-" Simulation+ 14 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/10= Soli Dor-" Simulation $l$m$nt li*rar# Four element types are availa)le in the Soli Dor-" Simulation element li)rary. The vast ma!ority of analyses use the second order tetrahedral element. -oth solid and shell first order elements should )e avoided. T&$ $!r$$" of fr$$om 0DO23 of a no$ in a finit$ $l$m$nt m$"& $fin$ t&$ a*ilit# of t&$ no$ to '$rform tran"lation or rotation+ T&$ num*$r of $!r$$" of fr$$om t&at a no$ 'o""$""$" $'$n" on t&$ t#'$ of $l$m$nt t&at t&$ no$ *$lon!" to+ In Soli Dor-" Simulation1 no$" of "oli $l$m$nt" &a($ t&r$$ $!r$$" of fr$$om1 %&il$ no$" of "&$ll $l$m$nt" &a($ "i. $!r$$" of fr$$om+ T&i" m$an" t&at in or$r to $"cri*$ tran"formation of a "oli $l$m$nt from t&$ com'on$nt" of noal i"'lac$m$nt1 mo"t oft$n t&$ .1 #1 B i"'lac$m$nt"+ In t&$ ca"$ of "&$ll $l$m$nt"1 %$ n$$ to -no% not onl# t&$ tran"lational com'on$nt" of noal i"'lac$m$nt"1 *ut al"o t&$ rotational i"'lac$m$nt com'on$nt"+ What is calculated in FEA Eac& $!r$$ of fr$$om of $($r# no$ in a finit$ $l$m$nt m$"& con"titut$" an un-no%n+ In "tructural anal#"i"1 %&$r$ %$ loo- at $formation" an "tr$""$"1 noal i"'lac$m$nt" ar$ t&$ 'rimar# un-no%n"+ If "oli $l$m$nt" ar$ u"$1 t&$r$ ar$ t&r$$ i"'lac$m$nt com'on$nt" 0or 6 $!r$$" of fr$$om3 '$r no$ t&at mu"t *$ calculat$+ Dit& "&$ll $l$m$nt"1 "i. i"'lac$m$nt com'on$nt" 0or< $!r$$" of fr$$om3 mu"t *$ calculat$+ 1; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC E($r#t&in! $l"$1 "uc& a" "train" an "tr$""$"1 ar$ calculat$ *a"$ on t&$ noal i"'lac$m$nt"+ Con"$4u$ntl#1 ri!i r$"traint" a''li$ to "oli $l$m$nt" r$4uir$ onl# t&r$$ $!r$$" of fr$$om to *$ con"train$+ Ri!i r$"traint" a''li$ to "&$ll $l$m$nt" r$4uir$ t&at all "i. $!r$$" of fr$$om *$ con"train$+ In a t&$rmal anal#"i"1 %&ic& fin" t$m'$ratur$" an &$at flo%1 t&$ 'rimar# un-no%n" ar$ noal t$m'$ratur$"+ Sinc$ t$m'$ratur$ i" a "calar (alu$ 0unli-$ t&$ ($ctor natur$ of i"'lac$m$nt"31 t&$n r$!arl$"" of %&at t#'$ of $l$m$nt i" u"$1 t&$r$ i" onl# on$ un-no%n 0t$m'$ratur$3 to *$ foun for $ac& no$+ All ot&$r r$"ult" a(aila*l$ in t&$ t&$rmal anal#"i" ar$ calculat$ *a"$ on t$m'$ratur$ r$"ult"+ T&$ fact t&at t&$r$ i" onl# on$ un-no%n to *$ foun for $ac& no$C rat&$r t&an t&r$$ or "i.1 ma-$" t&$rmal anal#"i" l$"" com'utationall# int$n"i($ t&an "tructural anal#"i"+ .o" to interpret FEA results R$"ult" of "tructural 2EA ar$ 'ro(i$ in t&$ form of i"'lac$m$nt" an "tr$""$"+ But &o% o %$ $ci$ if a $"i!n E'a""$"E or Efail"E an %&at o$" it ta-$ for alarm" to !o offF D&at $.actl# con"titut$" a failur$F To an"%$r t&$"$ 4u$"tion"1 %$ n$$ to $"ta*li"& "om$ crit$ria to int$r'r$t 2EA r$"ult"1 %&ic& ma# inclu$ ma.imum acc$'ta*l$ $formation1 ma.imum "tr$""1 or lo%$"t acc$'ta*l$ natural fr$4u$nc#+ D&il$ i"'lac$m$nt an fr$4u$nc# crit$ria ar$ 4uit$ o*(iou" an $a"# to $"ta*li"&1 "tr$"" crit$ria ar$ not+ L$tH" a""um$ t&at %$ n$$ to conuct a "tr$"" anal#"i" in or$r to $n"ur$ t&at "tr$""$" ar$ %it&in an acc$'ta*l$ ran!$+ To Au!$ "tr$"" r$"ult"1 %$ n$$ to un$r"tan t&$ m$c&ani"m of 'ot$ntial failur$1 if a 'art *r$a-"1 %&at "tr$"" m$a"ur$ *$"t $"cri*$" t&at failur$F I" it (onMi"$" "tr$""1 ma.imum 'rinci'al "tr$""1 "&$ar "tr$""1 or "om$t&in! $l"$F COSMOS Dor-" can 'r$"$nt "tr$"" r$"ult" in an# form %$ %ant+ It i" u' to u" to $ci$ %&ic& "tr$"" m$a"ur$ to u"$ for i""uin! a E'a""E or EfailE ($rict+ An# t$.t*oo- on t&$ M$c&anic" of Mat$rial" 'ro(i$" information on (ariou" failur$ crit$ria+ Int$r$"t$ r$a$r" can al"o r$f$r to *oo-"+ ,$r$ %$ %ill limit our i"cu""ion to outlinin! t&$ iff$r$nc$" *$t%$$n t%o commonl# u"$ "tr$"" m$a"ur$"= 9on Mi"$" "tr$"" an t&$ 'rinci'al "tr$""+ @() M"+.+ +'/.++ 9on Mi"$" "tr$""1 al"o -no%n a" ,u*$r "tr$""1 i" a "tr$"" m$a"ur$ t&at account" for all "i. "tr$"" com'on$nt" of a !$n$ral 6/D "tat$ of "tr$"" 0fi!ur$ 1/113+ 1< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/11= :$n$ral "tat$ of "tr$"" r$'r$"$nt$ *# t&r$$ normal "tr$""$"= I .1 I #1 I B an "i. "&$ar "tr$""$" J .# K J #.1 J #B K J B#1 J B. K J .B T"o components of shear stress and one component of normal stress act on each side of an elementary cu)e. $ue to e,uili)rium re,uirements, the general /-$state of stress is characteri(ed )y si& stress components0 I .1 I #1 I B an J .# K J #.1 J #B K J B#1 J B. K J .B Not$ t&at (on Mi"$" "tr$"" i" a non/n$!ati($1 "calar (alu$+ 9on Mi"$" "tr$"" i" commonl# u"$ to 'r$"$nt r$"ult" *$cau"$ "tructural "af$t# for man# $n!in$$rin! mat$rial" "&o%in! $la"to/'la"tic 'ro'$rti$" 0for $.am'l$1 "t$$l3 can *$ $(aluat$ u"in! (on Mi"$" "tr$""+ T&$ ma!nitu$ of (on Mi"$" "tr$"" can *$ com'ar$ to mat$rial #i$l or to ultimat$ "tr$n!t& to calculat$ t&$ #i$l "tr$n!t& or t&$ ultimat$ "tr$n!t& "af$t# factor+ P/")="-&% +'/.++.+ B# 'ro'$rl# aAu"tin! t&$ an!ular ori$ntation of t&$ "tr$"" cu*$ in fi!ur$ 1/111 "&$ar "tr$""$" i"a''$ar an t&$ "tat$ of "tr$"" i" r$'r$"$nt$ onl# *# t&r$$ 'rinci'al "tr$""$"= o=1 o51 an 061 a" "&o%n in fi!ur$ 1/15+ In Soli Dor-" "imulation1 'rinci'al "tr$""$" ar$ $not$ a" I 1 1 I 5 1 an I 6 + 17 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/15= :$n$ral "tat$ of "tr$"" r$'r$"$nt$ *# t&r$$ 'rinci'al "tr$""$"= I 11 I 51 I 6 1nits of measurements Int$rnall#1 Soli Dor-" "imulation u"$" t&$ Int$rnational S#"t$m of Unit" 0SI3+,o%$($r1 for t&$ u"$rH" con($ni$nc$1 t&$ unit mana!$r allo%" ata $ntr# in t&r$$ iff$r$nt "#"t$m" of unit"= SI1 M$tric1 an En!li"&+ R$"ult" can *$ i"'la#$ u"in! an# of t&$ t&r$$ unit "#"t$m"+ 2i!ur$ 1/16 "ummariB$" t&$ a(aila*l$ "#"t$m" of unit"+ 2i!ur$ 1/16= Unit "#"t$m" a(aila*l$ in Soli Dor-" "imulation SI, 2etric, and English systems of units can )e interchanged "hen entering data or analy(ing results in Soli Dor-" "imulation E.'$ri$nc$ inicat$" t&at unit" of ma"" $n"it# ar$ oft$n confu"$ %it& unit" of "'$cific !ra(it#+ T&$ i"tinction *$t%$$n t&$"$ t%o i" 4uit$ cl$ar in SI unit"= Ma"" $n"it# i" $.'r$""$ in 3kg4m/5, %&il$ "'$cific !ra(it# in 3*4m/5.,o%$($r1 in t&$ En!li"& "#"t$m1 *ot& "'$cific ma"" an "'$cific !ra(it# ar$ +$.'r$""$ in 3l)4in./5, %&$r$ 3l)5 $not$" $it&$r 'oun ma"" or 'oun forc$+ A" Soli Dor-" "imulation u"$r"1 %$ ar$ "'ar$ muc& confu"ion an trou*l$ %it& "#"t$m" of unit"+ 1? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ,o%$($r1 %$ ma# *$ a"-$ to 'r$'ar$ ata or int$r'r$t t&$ r$"ult" of ot&$r 2EA "oft%ar$ %&$r$ %$ o not &a($ t&$ con($ni$nc$ of t&$ unit mana!$r+ T&$r$for$1 %$ %ill ma-$ "om$ !$n$ral comm$nt" a*out t&$ u"$ of iff$r$nt "#"t$m" of unit" in t&$ 'r$'aration of in'ut ata for 2EA mo$l"+ D$ can u"$ an# con"i"t$nt "#"t$m of unit" for 2EA mo$l"1 *ut in 'ractic$1 t&$ c&oic$ of t&$ "#"t$m of unit" i" ictat$ *# %&at unit" ar$ u"$ in t&$ CAD mo$l+ T&$ "#"t$m of unit" in CAD mo$l" i" not al%a#" con"i"t$ntC l$n!t& can *$ $.'r$""$ in 3mm5, %&il$ ma"" $n"it# can *$ $.'r$""$ in 3kg4m/5.Contrar# to CAD mo$l"1 in 2EA all unit" must *$ con"i"t$nt+ Incon"i"t$nci$" ar$ $a"# to o($rloo-1 $"'$ciall# %&$n $finin! ma"" an ma"" $n"it#1 an t&$# can l$a to ($r# "$riou" $rror"+ SI, 2etric, and English systems of units can )e interchanged "hen entering data or analy(ing results in Soli Dor-" "imulation E.'$ri$nc$ inicat$" t&at unit" of ma"" $n"it# ar$ oft$n confu"$ %it& unit" of "'$cific !ra(it#+ T&$ i"tinction *$t%$$n t&$"$ t%o i" 4uit$ cl$ar in SI unit"= Ma"" $n"it# i" $.'r$""$ in 3kg4m/5, %&il$ "'$cific !ra(it# in 3*4m/5.,o%$($r1 in t&$ En!li"& "#"t$m1 *ot& "'$cific ma"" an "'$cific !ra(it# ar$ +$.'r$""$ in 3l)4in./5, %&$r$ 3l)5 $not$" $it&$r 'oun ma"" or 'oun forc$+ A" Soli Dor-" "imulation u"$r"1 %$ ar$ "'ar$ muc& confu"ion an trou*l$ %it& "#"t$m" of unit"+ ,o%$($r1 %$ ma# *$ a"-$ to 'r$'ar$ ata or int$r'r$t t&$ r$"ult" of ot&$r 2EA "oft%ar$ %&$r$ %$ o not &a($ t&$ con($ni$nc$ of t&$ unit mana!$r+ T&$r$for$1 %$ %ill ma-$ "om$ !$n$ral comm$nt" a*out t&$ u"$ of iff$r$nt "#"t$m" of unit" in t&$ 'r$'aration of in'ut ata for 2EA mo$l"+ D$ can u"$ an# con"i"t$nt "#"t$m of unit" for 2EA mo$l"1 *ut in 'ractic$ &i" c&oic$ of t&$ "#"t$m of unit" i" ictat$ *# %&at unit" ar$ u"$ in t&$ CAD mo$l+ T&$ "#"t$m of unit" in CAD mo$l" i" not al%a#" con"i"t$ntC l$n!t& can *$ $.'r$""$ in 3mm5, %&il$ ma"" $n"it# can *$ $.'r$""$ in 3kg4m/5.Contrar# to CAD mo$l"1 in 2EA all unit" must *$ con"i"t$nt+ Incon"i"t$nci$" ar$ $a"# to o($rloo-1 $"'$ciall# %&$n $finin! ma"" an ma"" $n"it#1 an t&$# can l$a to ($r# "$riou" $rror"+ In t&$ SI "#"t$m1 %&ic& i" *a"$ on m$t$r" 3m5 for l$n!t&1 -ilo!ram" 3kg5 for ma"" an "$con" 3s5 for tim$1 all ot&$r unit" ar$ $a"il# $ri($ from t&$"$ *a"ic unit"+ In m$c&anical $n!in$$rin!1 l$n!t& i" commonl# $.'r$""$ in millim$t$r" 3mm5, forc$ in N$%ton 3*5, an tim$ in "$con" 3s5. All ot&$r unit" mu"t t&$n *$ $ri($ from t&$"$ *a"ic unit"= 3mm5, 3*5, an 3s5.Con"$4u$ntl#1 t&$ unit of ma"" i" $fin$ a" a ma"" %&ic&1 %&$n "u*A$ct$ to a unit forc$ $4ual to IN1 %ill acc$l$rat$ %it& a unit acc$l$ration of 1 mm)"5+T&$r$for$1 t&$ unit of ma"" in a "#"t$m u"in! 3mm5 for l$n!t& an 3*5 for forc$1 i" $4ui(al$nt to 11000 -! or on$ m$tric ton+ Con"$4u$ntl#1 ma"" $n"it# i" $.'r$""$ in m$tric tonn$ 3tonne4mm/5. T&i" i" criticall# im'ortant to r$m$m*$r %&$n $finin! mat$rial 'ro'$rti$" in 2EA "oft%ar$ %it&out a unit mana!$r+ Notic$ in fi!ur$ 1/ 14 t&at an $rron$ou" $finition of ma"" $n"it# in 3kg4m/5 rat&$r t&an in 3tonne4mm/5 r$"ult" in ma"" $n"it# *$in! on$ trillion 010153 tim$" &i!&$r 0fi!ur$ 1/143+ 1@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 2i!ur$ 1/14= Ma"" $n"iti$" of aluminum in t&$ t&r$$ "#"t$m" of unit" #omparison of numerical values of mass densities of aluminum defined in this system of units "ith the system of units derived from SI, and "ith the English %I6S' system of units. 50 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EA! N(2 1 S'/.++ &)&%*+"+ (5 <.&#+ 0Sim'l# "u''ort$1 Cantil$($r > 2i.$ $n"3 AIM2 To '$rform i"'lac$m$nt an "tr$"" anal#"i" for t&$ !i($n *$am" 0Sim'l# "u''ort$1 Cantil$($r> 2i.$ $n"3 u"in! "oli %or-" "imulation an anal#tical $.'r$""ion"+ P/(<%.# D.+=/"-'"()2 0i3 A i"tri*ut$ loa > Point loa %ill *$ a''li$ to a "oli "t$$l *$am %it& a r$ctan!ular cro"" "$ction a" "&o%n in t&$ fi!ur$ 01+13 *$lo%+ T&$ cro""/"$ction of t&$ *$am i" 165mm . 5<4mm %&il$ t&$ moulu" of $la"ticit# of t&$ "t$$l i" 510:Pa+ 2in r$action1 $fl$ction an "tr$""$" in t&$ *$am+ 0ii3 A i"tri*ut$ loa > Point loa %ill *$ a''li$ to a "oli "t$$l *$am %it& a r$ctan!ular cro"" "$ction a" "&o%n in t&$ fi!ur$ 01+53 *$lo%+ T&$ cro""/"$ction of t&$ *$am i" 1;0mm . 600mm %&il$ t&$ moulu" of $la"ticit# of t&$ "t$$l i" 510:Pa+ 2in r$action1 $fl$ction an "tr$""$" in t&$ *$am+ 2i!+1+1 2i!+1+5 51 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 0iii3 A i"tri*ut$ loa > Point loa %ill *$ a''li$ to a "oli "t$$l *$am %it& a r$ctan!ular cro"" "$ction a" "&o%n in t&$ fi!ur$ 01+63 *$lo%+ T&$ cro""/"$ction of t&$ *$am i" ;75mm . 1144mm %&il$ t&$ moulu" of $la"ticit# of t&$ "t$$l i" 510:Pa+ 2in r$action1 $fl$ction an "tr$""$" in t&$ *$am+ P/(<%.# ,I0 Creation of solid model S(%": -&/' 12 Sketch module0 O'$n a n$% 'art fil$ L"$l$ct t&$ ri!&t 'lan$ L"$l$ct normal (i$%L ra% r$ctan!ular "&a'$ L"$l$ct "mart im$n"ion" moif# t&$ im$n"ion" a" 165 G 5<4 mm Feature 2odule0 S$l$ct t&$ "-$tc&1 L "$l$ct $.tru$ *o"" L $.tru$ %it& a l$n!t& 6000mm L o-+ S(%": -&/' 22 Sketch module0 S$l$ct t&$ ri!&t $n fac$ L"$l$ct normal (i$%L ra% r$ctan!ular "&a'$ L"$l$ct "mart im$n"ion" moif# t&$ im$n"ion" a" 165 G 5<4 mm Feature 2odule0 2i!+1+6 55 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC S$l$ct t&$ "-$tc&5 L "$l$ct $.tru$ *o"" L $.tru$ %it& t&ic-n$"" 6000mm L un"$l$ct m$r!$ com'on$nt L o-+ T&$ mo$l mu"t *$ a "oli o*A$ct R$f$r$nc$ 'oint= S-$tc& L 'oint L S$l$ct t&$ to' "urfac$ L "$l$ct normal (i$% L locat$ a 'oint L"$l$ct "mart im$n"ion" moif# t&$ location of t&$ 'oint a" 5000 mm from ri!&t $n L o-+ S$l$ct r$f$r$nc$ 'oint L "$l$ct "-$tc&6 0'oint3 > to' "urfac$ L o- Analysis the solid model
St$' *# "t$' 'roc$ur$ for t&$ anal#"i"+ Simulation Module: 9$rif# t&at "imulation mo$ i" "$l$ct$ in t&$ A/ln" li"t+ To "tart Simulation1 Onc$ Soli Dor-" Simulation &a" *$$n a$1 Simulation "&o%" in t&$ main Soli Dor-" tool m$nu+ S$l$ct t&$ "imulation Mana!$r ta*+ New Study: To $fin$ a n$% "tu#1 "$l$ct N$% Stu# $it&$r from t&$ Simulation m$nu or t&$ Simulation Comman Mana!$r M D&$n a "tu# i" $fin$1 Soli Dor-" Simulation cr$at$" a "tu# %ino% locat$ *$lo% t&$ Soli Dor-" 2$atur$ Mana!$r %ino% an 'lac$" "$($ral fol$r" in it+ It al"o a" a "tu# ta* t&at 'ro(i$" acc$"" to t&$ %ino%+ 56 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Static Study: To "$l$ct "tatic "tu# in t&$ "tu# ta*+ Simulation automaticall# cr$at$" a "tu# fol$r %it& t&$ follo%in! "u* fol$r"= Static Stu#1 Conn$ction"1 2i.tur$"1 Loa"1 M$"& an R$'ort fol$r+ Ri!&t clic- on t&$ Static "tu# / Tr$at t&$ "oli 'art 1 > 5 a" a *$am "$'arat$l#+ Apply Materials: To a''l# mat$rial to t&$ Simulation mo$l1 ri!&t/clic- t&$ "oli 'art fol$r in t&$ "imulation "tu#L "$l$ct A''l#)Eit Mat$rial from t&$ 'o'/u' m$nu L T&i" action o'$n" t&$ Mat$rial L S$l$ct 2rom li*rar# fil$" in t&$ S$l$ct mat$rial "ourc$ ar$aL S$l$ct Allo# St$$l+ 54 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Calculate the Joints: To calculat$ t&$ AointL Ri!&t/clic- t&$ Aoint" fol$r in Static "tu# L $it L calculat$ L o- 0aft$r finin! i"'la# of no+ of Aoint" mo$l3 5; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Apply Fixtures: To $fin$ t&$ 2i.tur$013 at $n AL Ri!&t/clic- t&$ 2i.tur$ fol$r in Static "tu# L "$l$ct fi.$ !$om$tr# a" 2i.tur$ t#'$ L S$l$ct t&$ l$ft $n Aoint %&$r$ 2i.tur$ i" to *$ a''li$ L S$l$ct immo(a*l$ !$om$tr# L o-+ 5< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC To $fin$ t&$ 2i.tur$ 053 at $n B L Ri!&t/clic- t&$ 2i.tur$ fol$r in Static "tu# L "$l$ct fi.$ !$om$tr# a" 2i.tur$ t#'$ L S$l$ct t&$ ri!&t $n AointL S$l$ct r$f$r$nc$ !$om$tr# a" fi.tur$ t#'$ L S$l$ct t&$ to' "urfac$ a" r$f$r$nc$ 'lan$ to r$'r$"$nt t&$ ir$ction of t&$ forc$ L S$l$ct t&$ forc$ ir$ction %&ic& i" normal to t&$ "$l$ct$ r$f$r$nc$ 'lan$ L Ent$r (al($ 0 L In t&$ !ra'&ic %ino% not$ t&$ "#m*ol" of t&$ a''li$ 2i.tur$+ Apply loads: D$ no% $fin$ t&$ loa *# "$l$ctin! 2orc$ from t&$ 'o'/u' m$nu+ T&i" action o'$n" t&$ 2orc$ %ino%+ T&$ 2orc$ %ino% i"'la#" t&$ 'ortion %&$r$ 'oint loa > uniforml# i"tri*ut$ loa i" a''li$ UDL= Ri!&t clic- t&$ loa fol$r L S$l$ct forc$" L "$l$ct t&$ "oli 'art1 L "$l$ct loa ) m L "$l$ct t&$ to' "urfac$ a" r$f$r$nc$ 'lan$ to r$'r$"$nt t&$ ir$ction of t&$ forc$+ T&i" illu"tration al"o "&o%" "#m*ol" of a''li$ r$"traint an loaL "$l$ct t&$ forc$ ir$ction %&ic& i" normal to t&$ "$l$ct$ r$f$r$nc$ *utton in or$r to loa t&$ *$am %it& 501000 N)m of uniforml# i"tri*ut$ loa o($r t&$ "$l$ct$ fac$ L o-+ 57 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Point Loa= Ri!&t clic- t&$ loa fol$r L S$l$ct forc$" L "$l$ct t&$ r$f$r$nc$ 'oint L "$l$ct t&$ to' "urfac$ a" r$f$r$nc$ 'lan$ to r$'r$"$nt t&$ ir$ction of t&$ forc$ L "$l$ct t&$ forc$ ir$ction %&ic& i" normal to t&$ "$l$ct$ r$f$r$nc$ *utton in or$r to loa t&$ *$am %it& 501000 N of 'oint loa on t&$ "$l$ct$ 'oint L o-+ 5? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Create the mesh: D$ ar$ no% r$a# to m$"& t&$ mo$l L Ri!&t/clic- t&$ M$"& fol$r L cr$at$ m$"& un the analysis: Ri!&t/clic-" t&$ "imulation mo$ L S$l$ct Run to "tart t&$ "olution+ A "ucc$""ful or fail$ "olution i" r$'ort$ an mu"t *$ ac-no%l$!$ *$for$ 'roc$$in! to anal#"i" of r$"ult"+ D&$n t&$ "olution com'l$t$" "ucc$""full#1 Simulation cr$at$" a R$"ult" fol$r %it& r$"ult 'lot" %&ic& ar$ $fin$ in Simulation D$fault O'tion"+ esults: Dit& t&$ "olution com'l$t$ "imulation automaticall# cr$at$" R$"ult" fol$r %it& "$($ral n$% fol$r" in t&$ "tu# Mana!$r Dino% li-$ Str$""1 Di"'lac$m$nt1 an Strain > D$formation+ Eac& fol$r &ol" an automaticall# cr$at$ 'lot %it& it" r$"'$cti($ t#'$ of r$"ult"+ T&$ "olution can *$ $.$cut$ %it& iff$r$nt 'ro'$rti$"+ S$l$ct on$ of t&$ follo%in! anal#"$" #ou %ant to "$$= Str$"" i"tri*ution Di"'lac$m$nt i"tri*ution D$form$ "&a'$ 5@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Ma-$ "ur$ t&at t&$ a*o($ 'lot" ar$ $fin$ in #our confi!uration1 if not1 $fin$ t&$m+ Onc$ t&$ "olution com'l$t$"1 #ou can a mor$ 'lot" to t&$ R$"ult" fol$r+ You can al"o cr$at$ "u*fol$r" in t&$ R$"ult" fol$r to !rou' 'lot"+ To i"'la# "tr$"" r$"ult"1 ou*l$/clic- on t&$ Str$""1 icon in t&$ R$"ult" fol$r or ri!&t/clic- it an "$l$ct S&o% from t&$ 'o'/u' m$nu+ P/(<%.# ,""0 B ,"""0 2ollo% t&$ "am$ 'roc$ur$ %it& r$4uir$ c&an!$"+ R.+$%'2 T&$ anal#"i" of t&$ *$am %a" carri$ out u"in! t&$ "oli%or-" "imulation an t&$ "oft%ar$ r$"ult" %$r$ com'ar$ %it& t&$or$tical or anal#tical r$"ult"+
60 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EA! N(2 2 S'/.++ &)&%*+"+ (5 & R.='&);$%&/ -%&'. 6"'8 ="/=$%&/ 8(%.+ Aim: To '$rform i"'lac$m$nt an "tr$"" anal#"i" for t&$ !i($n r$ctan!ular 'lat$ %it& &ol$" u"in! "oli %or-" "imulation an anal#tical $.'r$""ion"+ !ro"lem description: A "t$$l 'lat$ %it& 6 &ol$" 6mm1 ;mm > 10 mm r$"'$cti($l# i" "u''ort$ an loa$1 a" "&o%n in fi!ur$+ D$ a""um$ t&at t&$ "u''ort i" ri!i 0t&i" i" al"o call$ *uilt/in "u''ort or fi.$ "u''ort3 an t&at t&$ 50 NN t$n"il$ loa i" uniforml# i"tri*ut$ on t&$ $n fac$1 o''o"it$ to t&$ "u''ort$ fac$+ T&$ cro"" "$ction i" 1; mm . 5; mm+ l$n!t& i" 100mm+ Mat$rial 0Allo# "t$$l3 Creation of the solid model using solid wor#s S#etch module: S-$tc&013 M O'$n a n$% 'art fil$ L"$l$ct t&$ front 'lan$ L"$l$ct normal (i$%L ra% r$ctan!ular "&a'$ L"$l$ct "mart im$n"ion" moif# t&$ im$n"ion" a" 1; G 5; mmL Dra% t&r$$ circl$" a" 6mm1 ;mm > 10 mm %it& 5;mm i"tanc$+ T K 1;mm L K 100mm , K 5;mm DK6mm DK;mm DK10mm P K 50-N Uniforml# i"tri*ut$ 61 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Feature Module: 2$atur$ 013 M S$l$ct t&$ "-$tc& 0O3 L S$l$ct $.tru$ *o"" L $.tru$ %it& t&ic-n$"" 100mm+ S#etch module: S-$tc& 053 L "$l$ct t&$ front "urfac$ L"$l$ct normal (i$% L Dra% t&r$$ circl$" a" 6mm1 ;mm > 10 mm %it& 5;mm i"tanc$+ Feature Module: 2$atur$ 053 M S$l$ct t&$ "-$tc& 053 L "$l$ct $.tru$ cut L $.tru$ %it& t&ic-n$"" 1;mm L o- Analysis of the solid model Simulation Module: 9$rif# t&at "imulation mo$ i" "$l$ct$ in t&$ A/l$n" li"t+ To "tart Simulation1 Onc$ Soli Dor-" Simulation &a" *$$n a$1 Simulation "&o%" in t&$ main Soli Dor-" tool m$nu+ S$l$ct t&$ "imulation Mana!$r ta*+ New Study: To $fin$ a n$% "tu#1 "$l$ct N$% Stu# $it&$r from t&$ Simulation m$nu or t&$ Simulation Comman Mana!$r M D&$n a "tu# i" $fin$1 Soli Dor-" Simulation cr$at$" a "tu# %ino% locat$ *$lo% t&$ Soli Dor-" 2$atur$ Mana!$r %ino% an 'lac$" "$($ral fol$r" in it+ It al"o a" a "tu# ta* t&at 'ro(i$" acc$"" to t&$ %ino%+ Static Study: To "$l$ct "tatic "tu# in t&$ "tu# ta*+ Simulation automaticall# cr$at$" a "tu# fol$r %it& t&$ follo%in! "u* fol$r"= Static Stu#1 Conn$ction"1 2i.tur$"1 Loa"1 M$"& an R$'ort fol$r+ Apply Materials: To a''l# mat$rial to t&$ Simulation mo$l1 ri!&t/clic- t&$ 'art fol$r in "imulation "tu# an "$l$ct A''l#)Eit Mat$rial from t&$ 'o'/u' m$nu L T&i" action o'$n" t&$ Mat$rial L S$l$ct 2rom li*rar# fil$" in t&$ S$l$ct mat$rial "ourc$ ar$aL S$l$ct Allo# St$$l+ 65 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Apply Fixtures: To $fin$ t&$ 2i.tur$"L Ri!&t/clic- t&$ 2i.tur$ fol$r in Static "tu# L "$l$ct fi.$ !$om$tr# a" 2i.tur$ t#'$ L "$l$ct t&$ l$ft $n fac$ L o- Apply loads: D$ no% $fin$ t&$ loa *# "$l$ctin! 2orc$ from t&$ 'o'/u' m$nu+ T&$ 2orc$ %ino% i"'la#" t&$ "$l$ct$ fac$ %&$r$ t$n"il$ forc$ i" a''li$ LS$l$ct u"$ r$f$r$nc$ !$om$tr# L S$l$ct t&$ ri!&t 'lan$ a" r$f$r$nc$ 'lan$ to r$'r$"$nt t&$ ir$ction of t&$ forc$+ L S$l$ct t&$ forc$ ir$ction %&ic& i" normal to t&$ "$l$ct$ r$f$r$nc$ 'lan$ *utton in or$r to loa t&$ Mo$l %it& 501000 N of t$n"il$ forc$ uniforml# i"tri*ut$ o($r t&$ $n fac$+ Create the mesh: D$ ar$ no% r$a# to m$"& t&$ mo$l L Ri!&t/clic- t&$ M$"& fol$r L cr$at$ m$"& un the analysis: Ri!&t/clic-in! t&$ "imulation mo$ L S$l$ct Run to "tart t&$ "olution+ A "ucc$""ful or fail$ "olution i" r$'ort$ an mu"t *$ ac-no%l$!$ *$for$ 'roc$$in! to anal#"i" of r$"ult"+ D&$n t&$ "olution com'l$t$" "ucc$""full#1 Simulation cr$at$" a R$"ult" fol$r %it& r$"ult 'lot" %&ic& ar$ $fin$ in Simulation D$fault O'tion"+ esults: Dit& t&$ "olution com'l$t$ "imulation automaticall# cr$at$" R$"ult" fol$r %it& "$($ral n$% fol$r" in t&$ "tu# Mana!$r Dino% li-$ Str$""1 Di"'lac$m$nt1 an Strain > D$formation+ Eac& fol$r &ol" an automaticall# cr$at$ 'lot %it& it" r$"'$cti($ t#'$ of r$"ult"+ Str$""1 "&o%in! in normal . ir$ction Di"'lac$m$nt1 "&o%in! r$"ultant i"'lac$m$nt" To i"'la# "tr$"" r$"ult"1 ou*l$/clic- on t&$ Str$""1 icon in t&$ R$"ult" fol$r or ri!&t/clic- it an "$l$ct S&o% from t&$ 'o'/u' m$nu+ R.+$%'2 66 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ anal#"i" of t&$ r$ctan!ular 'lat$ %a" carri$ out u"in! t&$ "oli %or-" "imulation an "oft%ar$ r$"ult" %$r$ com'ar$ %it& t&$or$tical or anal#tical (alu$"+ EA! N(2 1 S'/.++ &)&%*+"+ (5 & R.='&);$%&/ L B/&=4.' A"#2 To '$rform i"'lac$m$nt an "tr$"" anal#"i" for t&$ !i($n r$ctan!ular L Brac-$t 0Dall Brac-$t3 u"in! "oli %or-" "imulation an anal#tical $.'r$""ion"+ P/(<%.# :.+=/"-'"()2 An L/"&a'$ *rac-$t i" "u''ort$ an loa$ a" "&o%n in fi!ur$ 6/1+ D$ %i"& to fin t&$ Di"'lac$m$nt" an "tr$""$" cau"$ *# a ;1000 N %&ic& i" <0P inclin$+ In 'articular1 %$ ar$ int$r$"t$ in "tr$""$" in t&$ corn$r %&$r$ t&$ ; mm roun $!$ 0fill$t3 i" locat$+ Mat$rial :r$# Ca"t Iron+ Creation of the solid model S#etch module: O'$n a n$% 'art fil$ L"$l$ct t&$ front 'lan$ L"$l$ct normal (i$%L ra% t&$ r$4uir$ "&a'$ L"$l$ct "mart im$n"ion"L moif# t&$ im$n"ion" L"$l$ct fill$t mo$ L$nt$r raiu" ;mmL"$l$ct t&$ "'$cifi$ $!$"Lo-+ ;000N <0Q 600mm 1;0mm 70mm R @0mm R 70mm T&ic-n$"" 6;mm 64 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Feature Module: S$l$ct t&$ "-$tc& L "$l$ct $.tru$ *o"" 7 "$l$ct mi'lan$ o'tion L $.tru$ %it& t&ic-n$"" 17+;mm+ S-$tc& Point= S$l$ct t&$ front 'lan$ L normal (i$% L ra% a lin$ 0"-$tc& 53 from t&$ c$ntr$ of t&$ &ol$ %&ic& i" <0Q inclin$ to t&$ ($rtical+ S$l$ct t&$ front 'lan$ L locat$ t&$ int$r"$ction 'oint of <0Q inclin$ lin$ > "-$tc& 6 Lo-+ R$f$r$nc$ 'oint= S$l$ct r$f$r$nc$ 'oint !$om$tr# L "$l$ct "-$tc& 6 'oint > inn$r "urfac$ of t&$ &ol$ L o-+ Analysis of the solid model Simulation Module: 9$rif# t&at "imulation mo$ i" "$l$ct$ in t&$ A/ln" li"t+ To "tart Simulation1 Onc$ Soli Dor-" Simulation &a" *$$n a$1 Simulation "&o%" in t&$ main Soli Dor-" tool m$nu+ S$l$ct t&$ "imulation Mana!$r ta*+ New Study: To $fin$ a n$% "tu#1 "$l$ct N$% Stu# $it&$r from t&$ Simulation m$nu or t&$ Simulation Comman Mana!$r M D&$n a "tu# i" $fin$1 Soli Dor-" Simulation cr$at$" a "tu# %ino% locat$ *$lo% t&$ Soli Dor-" 2$atur$ Mana!$r %ino% an 'lac$" "$($ral fol$r" in it+ It al"o a" a "tu# ta* t&at 'ro(i$" acc$"" to t&$ %ino%+ Static Study: To "$l$ct "tatic "tu# in t&$ "tu# ta*+ Simulation automaticall# cr$at$" a "tu# fol$r %it& t&$ follo%in! "u* fol$r"= Static Stu#1 Conn$ction"1 2i.tur$"1 Loa"1 M$"& an R$'ort fol$r+ Apply Materials: To a''l# mat$rial to t&$ Simulation mo$l1 ri!&t/clic- t&$ 'art 6; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC fol$r in "imulation "tu# an "$l$ct A''l#)Eit Mat$rial from t&$ 'o'/u' m$nu L T&i" action o'$n" t&$ Mat$rial L S$l$ct 2rom li*rar# fil$" in t&$ S$l$ct mat$rial "ourc$ ar$aL S$l$ct :r$# Ca"t Iron+ Apply Fixtures: To $fin$ t&$ 2i.tur$"L Ri!&t/clic- t&$ 2i.tur$ fol$r in Static "tu# In 2i.tur$"L "$l$ct fi.$ !$om$tr# a" 2i.tur$ t#'$ L "$l$ct t&$ mo$l fac$ 0l$ft $n fac$3 %&$r$ 2i.tur$ i" to *$ a''li$L o-+ Apply loads: Ri!&t/clic- t&$ 2orc$ fol$r L S$l$ct forc$ L S$l$ct t&$ r$f$r$nc$ 'oint L "$l$ct t&$ r$f$r$nc$ 'lan$ to r$'r$"$nt t&$ ir$ction of t&$ forc$ in or$r to loa t&$ Mo$l %it& ;000 N of %&ic& i" <0Q inclin$++ T&i" illu"tration al"o "&o%" "#m*ol" of a''li$ r$"traint an loa Create the mesh: D$ ar$ no% r$a# to m$"& t&$ mo$l L Ri!&t/clic- t&$ M$"& fol$r L cr$at$ m$"& un the analysis: Ri!&t/clic-in! t&$ "imulation mo$ L S$l$ct Run to "tart t&$ "olution+ D&$n t&$ "olution com'l$t$" "ucc$""full#1 Simulation cr$at$" a R$"ult" fol$r %it& r$"ult 'lot" %&ic& ar$ $fin$ in Simulation D$fault O'tion"+ esults: Dit& t&$ "olution com'l$t$ "imulation automaticall# cr$at$" R$"ult" fol$r %it& "$($ral n$% fol$r" in t&$ "tu# Mana!$r Dino% li-$ Str$""1 Di"'lac$m$nt1 an Strain > D$formation+ Eac& fol$r &ol" an automaticall# cr$at$ 'lot %it& it" r$"'$cti($ t#'$ of r$"ult"+ T&$ "olution can *$ $.$cut$ %it& iff$r$nt 'ro'$rti$"+ Str$""1 "&o%in! (on Mi""$" "tr$""$" Di"'lac$m$nt1 "&o%in! r$"ultant i"'lac$m$nt" Onc$ t&$ "olution com'l$t$"1 #ou can a mor$ 'lot" to t&$ R$"ult" fol$r+ You can al"o cr$at$ "u*fol$r" in t&$ R$"ult" fol$r to !rou' 'lot"+ To i"'la# "tr$"" r$"ult"1 ou*l$/clic- on t&$ Str$""1 icon in t&$ R$"ult" fol$r or ri!&t/clic- it an "$l$ct S&o% from t&$ 'o'/u' m$nu+ 6< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC R.+$%'2 T&$ anal#"i" of t&$ L / Brac-$t %a" carri$ out u"in! t&$ "oli%or-" "imulation an t&$ "oft%ar$ r$"ult" %$r$ com'ar$ %it& anal#tical (alu$"+ EA!M(!4 S'/.++ &)&%*+"+ (5 &) &A"-+*##.'/"= =(#-().)' A"#2 To '$rform "tr$"" anal#"i" for t&$ !i($n a.i/"#mm$tric com'on$nt+ P/(<%.# :.+=/"-'"()2 Creation of the solid model S#etch module: O'$n a n$% 'art fil$ L"$l$ct t&$ to' 'lan$ L"$l$ct normal (i$%L ra% t&$ r$ctan!ular "&a'$ L"$l$ct "mart im$n"ion"L moif# t&$ im$n"ion" 1000mm . 1;mm Lo-+ S$l$ct "-$tc& L ra% c$ntr$ a.i" L o-+ Feature Module: S$l$ct t&$ "-$tc& L "$l$ct r$(ol($ 7 "$l$ct t&$ c$ntr$ a.i"L r$(olution an!l$ @0Q+ Surface Module: S$l$ct "urfac$ L mi "urfac$ L"$l$ct t&$ t%o out$r fac$" Lo-+ Ri!&t clic- t&$ "urfac$ mo$l L $it $finition L $nt$r t&ic-n$"" 1;mm L o-+ Analysis of the solid model Simulation Module:
New Study: To $fin$ a n$% "tu# L "$l$ct N$% Stu# L"tatic Lo-+ Static Study: 67 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC To "$l$ct "tatic "tu# in t&$ "tu# ta*+ Simulation automaticall# cr$at$" a "tu# fol$r %it& t&$ follo%in! "u* fol$r"= Static Stu#1 Conn$ction"1 2i.tur$"1 Loa"1 M$"& an R$'ort fol$r+ Apply Materials: To a''l# mat$rial to t&$ Simulation mo$l L ri!&t/clic- t&$ 'art fol$r in "imulation "tu# an "$l$ct A''l#)Eit Mat$rial L Allo# "t$$l L o-+ Apply Fixtures: To $fin$ t&$ 2i.tur$"L Ri!&t/clic- t&$ 2i.tur$ fol$r in Static "tu# In 2i.tur$"L "$l$ct A(anc$ !$om$tr# L "$l$ct "#mm$tr# L "$l$ct t&$ $n fac$" 0l$ft > ri!&t $n fac$3 %&$r$ 2i.tur$ i" to *$ a''li$ L o-+ Apply loads: Ri!&t/clic- t&$ 2orc$ fol$r L S$l$ct Pr$""ur$ L S$l$ct t&$ inn$r "urfac$ of t&$ "$ctor LEnt$r 'r$""ur$ 1+;M'a L o-+ Create the mesh: Ri!&t/clic- t&$ M$"& fol$r L cr$at$ m$"& L "$l$ct Automatic tran"ition Lo-+ un the analysis: S$l$ct Run to "tart t&$ "olution esults: T&$ "olution can *$ $.$cut$ %it& iff$r$nt 'ro'$rti$"+ "tr$""$" i"'lac$m$nt" "train" R.+$%'2 T&$ anal#"i" of t&$ a.i/"#mm$tric com'on$nt %a" carri$ out u"in! t&$ "oli%or-" "imulation an t&$ "oft%ar$ r$"ult" %$r$ com'ar$ %it& anal#tical (alu$"+ 6? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EA! N(2 5 M(:. 5/.C$.)=* &)&%*+"+ (5 & 2 D =(#-().)' EA! N(2 6 M(:. 5/.C$.)=* &)&%*+"+ (5 <.&#+ ,C&)'"%.?./, S"#-%* S$--(/'.:, F"A.: .):+0 6@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EA! N(2 D H&/#()"= &)&%*+"+ (5 & 2D =(#-().)' EA! N(2 E T8./#&% +'/.++ &)&%*+"+ (5 & 2D =(#-().)'
40 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EA! N(2 F C():$='"?. 8.&' '/&)+5./ &)&%*+"+ (5 & 2D =(#-().)' AIM: EA! N(2 10 C()?.='"?. 8.&' '/&)+5./ &)&%*+"+ (5 & 2D =(#-().)' 41 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC MATLAB INTRODUCTION= O?./?".6 (5 '8. MATLABG E)?"/()#.)' T&$ MATLABS &i!&/'$rformanc$ lan!ua!$ for t$c&nical com'utin! int$!rat$" com'utation1 (i"ualiBation1 an 'ro!rammin! in an $a"#/to/u"$ $n(ironm$nt %&$r$ 'ro*l$m" an "olution" ar$ $.'r$""$ in familiar mat&$matical notation+ T#'ical u"$" inclu$ H Mat& an com'utation H Al!orit&m $($lo'm$nt H Data ac4ui"ition H Mo$lin!1 "imulation1 an 'rotot#'in! H Data anal#"i"1 $.'loration1 an (i"ualiBation H Sci$ntific an $n!in$$rin! !ra'&ic" H A''lication $($lo'm$nt1 Incluin! !ra'&ical u"$r int$rfac$ *uilin! MATLAB i" an int$racti($ "#"t$m %&o"$ *a"ic ata $l$m$nt i" an arra# t&at o$" not r$4uir$ im$n"ionin!+ It allo%" #ou to "ol($ man# t$c&nical com'utin! 'ro*l$m"1 $"'$ciall# t&o"$ %it& matri. an ($ctor formulation"1 in a fraction of t&$ tim$ it %oul ta-$ to %rit$ a 'ro!ram in a "calar nonint$racti($ lan!ua!$ "uc& a" C or 2ORTRAN+ T&$ nam$ MATLAB "tan" for matri& la)oratory+ MATLAB %a" ori!inall# %ritt$n to 'ro(i$ $a"# acc$"" to matri. "oft%ar$ $($lo'$ *# t&$ LINPACN an EISPACN 'roA$ct"+ Toa#1 MATLAB $n!in$" incor'orat$ t&$ LAPACN an BLAS li*rari$"1 $m*$in! t&$ "tat$ of t&$ art in "oft%ar$ for matri. com'utation+ 45 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC SIMULINK INTRODUCTION2 Simulin- i" a !ra'&ical $.t$n"ion to MATLAB for mo$lin! an "imulation of "#"t$m"+ In Simulin-1 "#"t$m" ar$ ra%n on "cr$$n a" *loc- ia!ram"+ Man# $l$m$nt" of *loc- ia!ram" ar$ a(aila*l$1 "uc& a" tran"f$r function"1 "ummin! Aunction"1 $tc+1 a" %$ll a" (irtual in'ut an out'ut $(ic$" "uc& a" function !$n$rator" an o"cillo"co'$"+ Simulin- i" int$!rat$ %it& MATLAB an ata can *$ $a"il# tran"f$rr$ *$t%$$n t&$ 'ro!ram"+ In t&$"$ tutorial"1 %$ %ill a''l# Simulin- to t&$ $.am'l$" from t&$ MATLAB tutorial" to mo$l t&$ "#"t$m"1 *uil controll$r"1 an "imulat$ t&$ "#"t$m"+ Simulin- i" "u''ort$ on Uni.1 Macinto"&1 an Dino%" $n(ironm$nt"C an i" inclu$ in t&$ "tu$nt ($r"ion of MATLAB for '$r"onal com'ut$r"+ T&$ i$a *$&in t&$"$ tutorial" i" t&at #ou can (i$% t&$m in on$ %ino% %&il$ runnin! Simulin- in anot&$r %ino%+ S#"t$m mo$l fil$" can *$ o%nloa$ from t&$ tutorial" an o'$n$ in Simulin-+ You %ill moif# an 46 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC $.t$n t&$"$ "#"t$m %&il$ l$arnin! to u"$ Simulin- for "#"t$m mo$lin!1 control1 an "imulation+ Do not confu"$ t&$ %ino%"1 icon"1 an m$nu" in t&$ tutorial" for #our actual Simulin- %ino%"+ Mo"t ima!$" in t&$"$ tutorial" ar$ not li($ / t&$# "im'l# i"'la# %&at #ou "&oul "$$ in #our o%n Simulin- %ino%"+ All Simulin- o'$ration" "&oul *$ on$ in #our Simulin- %ino%"+ 1+ Startin! Simulin- 5+ Mo$l 2il$" 6+ Ba"ic El$m$nt" 4+ Runnin! Simulation" ;+ Builin! S#"t$m" S'&/'"); S"#$%")4 Simulin- i" "tart$ from t&$ MATLAB comman 'rom't *# $nt$rin! t&$ follo%in! comman= MM Simulin- Alt$rnati($l#1 #ou can &it t&$ Simulin- *utton at t&$ to' of t&$ MATLAB %ino% a" "&o%n *$lo%= D&$n it "tart"1 Simulin- *rin!" u' t&$ Simulin- Li*rar# *ro%"$r+ 44 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC O'$n t&$ mo$lin! %ino% %it& N$% t&$n Mo$l from t&$ 2il$ m$nu on t&$ Simulin- Li*rar# Bro%"$r a" "&o%n a*o($+ T&i" %ill *rin! u' a n$% untitil$ mo$lin! %ino% "&o%n *$lo%+ 4; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC M(:.% F"%.+ In Simulin-1 a mo$l i" a coll$ction of *loc-" %&ic&1 in !$n$ral1 r$'r$"$nt" a "#"t$m+ In aition to ra%in! a mo$l into a *lan- mo$l %ino%1 'r$(iou"l# "a($ mo$l fil$" can *$ loa$ $it&$r from t&$ 2il$ m$nu or from t&$ MATLAB comman 'rom't+ You can o'$n "a($ fil$" in Simulin- *# $nt$rin! t&$ follo%in! comman in t&$ MATLAB comman %ino%+ 0Alt$rnati($l#1 #ou can loa a fil$ u"in! t&$ O'$n o'tion in t&$ 2il$ m$nu in Simulin-1 or *# &ittin! CtrlTO in Simulin-+3 MM fil$nam$
T&$ follo%in! i" an $.am'l$ mo$l %ino%+ 4< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC A n$% mo$l can *$ cr$at$ *# "$l$ctin! N$% from t&$ 2il$ m$nu in an# Simulin- %ino% 0or *# &ittin! CtrlTN3+ B&+"= E%.#.)'+ T&$r$ ar$ t%o maAor cla""$" of it$m" in Simulin-= *loc-" an lin$"+ Bloc-" ar$ u"$ to !$n$rat$1 moif#1 com*in$1 out'ut1 an i"'la# "i!nal"+ Lin$" ar$ u"$ to tran"f$r "i!nal" from on$ *loc- to anot&$r+ B%(=4+ T&$r$ ar$ "$($ral !$n$ral cla""$" of *loc-"= U Continuou" U Di"continuou" U Di"cr$t$ U Loo-/U' Ta*l$" U Mat& O'$ration" U Mo$l 9$rification U Mo$l/Di$ Utiliti$" U Port" > Su*"#"t$m" U Si!nal Attri*ut$" U Si!nal Routin! U Sin-"= U"$ to out'ut or i"'la# "i!nal" U Sourc$"= U"$ to !$n$rat$ (ariou" "i!nal" U U"$r/D$fin$ 2unction" U Di"cr$t$= Lin$ar1 i"cr$t$/tim$ "#"t$m $l$m$nt" 0tran"f$r function"1 "tat$/ "'ac$ mo$l"1 $tc+3 U Lin$ar= Lin$ar1 continuou"/tim$ "#"t$m $l$m$nt" an conn$ction" 0"ummin! Aunction"1 !ain"1 $tc+3 U Nonlin$ar= Nonlin$ar o'$rator" 0ar*itrar# function"1 "aturation1 $la#1 $tc+3 U Conn$ction"= Multi'l$.1 D$multi'l$.1 S#"t$m Macro"1 $tc+ Bloc-" &a($ B$ro to "$($ral in'ut t$rminal" an B$ro to "$($ral out'ut t$rminal"+ Unu"$ in'ut t$rminal" ar$ inicat$ *# a "mall o'$n trian!l$+ Unu"$ out'ut t$rminal" ar$ inicat$ *# a "mall trian!ular 'oint+ T&$ *loc- "&o%n *$lo% &a" an unu"$ in'ut t$rminal on t&$ l$ft an an unu"$ out'ut t$rminal on t&$ ri!&t+ 47 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC L").+ Lin$" tran"mit "i!nal" in t&$ ir$ction inicat$ *# t&$ arro%+ Lin$" mu"t al%a#" tran"mit "i!nal" from t&$ out'ut t$rminal of on$ *loc- to t&$ in'ut t$rminal of anot&$r *loc-+ On$ $.c$'tion to t&i" i" a lin$ can ta' off of anot&$r lin$1 "'littin! t&$ "i!nal to $ac& of t%o $"tination *loc-"1 a" "&o%n *$lo%+ Lin$" can n$($r inA$ct a "i!nal into anot&$r lin$C lin$" mu"t *$ com*in$ t&rou!& t&$ u"$ of a *loc- "uc& a" a "ummin! Aunction+ A "i!nal can *$ $it&$r a "calar "i!nal or a ($ctor "i!nal+ 2or Sin!l$/In'ut1 Sin!l$/Out'ut "#"t$m"1 "calar "i!nal" ar$ !$n$rall# u"$+ 2or Multi/In'ut1 Multi/Out'ut "#"t$m"1 ($ctor "i!nal" ar$ oft$n u"$1 con"i"tin! of t%o or mor$ "calar "i!nal"+ T&$ lin$" u"$ to tran"mit "calar an ($ctor "i!nal" ar$ i$ntical+ T&$ t#'$ of "i!nal carri$ *# a lin$ i" $t$rmin$ *# t&$ *loc-" on $it&$r $n of t&$ lin$+ S"#-%. EA&#-%. 4? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ simple mo$l 0from t&$ mo$l fil$" "$ction3 con"i"t" of t&r$$ *loc-"= St$'1 Tran"f$r 2cn1 an Sco'$+ T&$ St$' i" a "ourc$ *loc- from %&ic& a "t$' in'ut "i!nal ori!inat$"+ T&i" "i!nal i" tran"f$rr$ t&rou!& t&$ lin$ in t&$ ir$ction inicat$ *# t&$ arro% to t&$ Tran"f$r 2unction lin$ar *loc-+ T&$ Tran"f$r 2unction moifi$" it" in'ut "i!nal an out'ut" a n$% "i!nal on a lin$ to t&$ Sco'$+ T&$ Sco'$ i" a "in- *loc- u"$ to i"'la# a "i!nal muc& li-$ an o"cillo"co'$+ T&$r$ ar$ man# mor$ t#'$" of *loc-" a(aila*l$ in Simulin-1 "om$ of %&ic& %ill *$ i"cu""$ lat$r+ Ri!&t no%1 %$ %ill $.amin$ Au"t t&$ t&r$$ %$ &a($ u"$ in t&$ "im'l$ mo$l+ M(:"5*"); B%(=4+ A *loc- can *$ moifi$ *# ou*l$/clic-in! on it+ 2or $.am'l$1 if #ou ou*l$/clic- on t&$ ETran"f$r 2cnE *loc- in t&$ simple mo$l1 #ou %ill "$$ t&$ follo%in! ialo! *o.+ 4@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&i" ialo! *o. contain" fi$l" for t&$ num$rator an t&$ $nominator of t&$ *loc-H" tran"f$r function+ B# $nt$rin! a ($ctor containin! t&$ co$ffici$nt" of t&$ $"ir$ num$rator or $nominator 'ol#nomial1 t&$ $"ir$ tran"f$r function can *$ $nt$r$+ 2or $.am'l$1 to c&an!$ t&$ $nominator to "V5T5"T11 $nt$r t&$ follo%in! into t&$ $nominator fi$l= W1 5 1X an &it t&$ clo"$ *utton1 t&$ mo$l %ino% %ill c&an!$ to t&$ follo%in!= %&ic& r$fl$ct" t&$ c&an!$ in t&$ $nominator of t&$ tran"f$r function+ T&$ E"t$'E *loc- can al"o *$ ou*l$/clic-$1 *rin!in! u' t&$ follo%in! ialo! *o.+ ;0 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ $fault 'aram$t$r" in t&i" ialo! *o. !$n$rat$ a "t$' function occurrin! at tim$K1 "$c1 from an initial l$($l of B$ro to a l$($l of 1+ 0in ot&$r %or"1 a unit "t$' at tK13+ Eac& of t&$"$ 'aram$t$r" can *$ c&an!$+ Clo"$ t&i" ialo! *$for$ continuin!+ T&$ mo"t com'licat$ of t&$"$ t&r$$ *loc-" i" t&$ ESco'$E *loc-+ Dou*l$ clic-in! on t&i" *rin!" u' a *lan- o"cillo"co'$ "cr$$n+ ;1 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC D&$n a "imulation i" '$rform$1 t&$ "i!nal %&ic& f$$" into t&$ "co'$ %ill *$ i"'la#$ in t&i" %ino%+ D$tail$ o'$ration of t&$ "co'$ %ill not *$ co($r$ in t&i" tutorial+ T&$ onl# function %$ %ill u"$ i" t&$ auto"cal$ *utton1 %&ic& a''$ar" a" a 'air of *inocular" in t&$ u''$r 'ortion of t&$ %ino%+ R$))"); S"#$%&'"()+ To run a "imulation1 %$ %ill %or- %it& t&$ follo%in! mo$l fil$= "im'l$5+ml Do%nloa an o'$n t&i" fil$ in Simulin- follo%in! t&$ 'r$(iou" in"truction" for t&i" fil$+ You "&oul "$$ t&$ follo%in! mo$l %ino%+ B$for$ runnin! a "imulation of t&i" "#"t$m1 fir"t o'$n t&$ "co'$ %ino% *# ou*l$/clic-in! on t&$ "co'$ *loc-+ T&$n1 to "tart t&$ "imulation1 $it&$r "$l$ct Start from t&$ Simulation m$nu 0a" "&o%n *$lo%3 or &it Ctrl/T in t&$ mo$l %ino%+ ;5 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ "imulation "&oul run ($r# 4uic-l# an t&$ "co'$ %ino% %ill a''$ar a" "&o%n *$lo%+ If it o$"nHt1 Au"t ou*l$ clic- on t&$ *loc- la*$l$ E"co'$+E Not$ t&at t&$ "imulation out'ut 0"&o%n in #$llo%3 i" at a ($r# lo% l$($l r$lati($ to t&$ a.$" of t&$ "co'$+ To fi. t&i"1 &it t&$ auto"cal$ *utton 0*inocular"31 %&ic& %ill r$"cal$ t&$ a.$" a" "&o%n *$lo%+ Not$ t&at t&$ "t$' r$"'on"$ o$" not *$!in until tK1+ T&i" can *$ c&an!$ *# ou*l$/clic-in! on t&$ E"t$'E *loc-+ No%1 %$ %ill c&an!$ t&$ 'aram$t$r" of t&$ "#"t$m an "imulat$ t&$ "#"t$m a!ain+ Dou*l$/clic- on t&$ ETran"f$r 2cnE *loc- in t&$ mo$l %ino% an c&an!$ t&$ $nominator to ;6 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC W1 50 400X
R$/run t&$ "imulation 0&it Ctrl/T3 an #ou "&oul "$$ %&at a''$ar" a" a flat lin$ in t&$ "co'$ %ino%+ ,it t&$ auto"cal$ *utton1 an #ou "&oul "$$ t&$ follo%in! in t&$ "co'$ %ino%+ Notic$ t&at t&$ auto"cal$ *utton onl# c&an!$" t&$ ($rtical a.i"+ Sinc$ t&$ n$% tran"f$r function &a" a ($r# fa"t r$"'on"$1 it com'r$""$ into a ($r# narro% 'art of t&$ "co'$ %ino%+ T&i" i" not r$all# a 'ro*l$m %it& t&$ "co'$1 *ut %it& t&$ "imulation it"$lf+ Simulin- "imulat$ t&$ "#"t$m for a full t$n "$con" $($n t&ou!& t&$ "#"t$m &a r$ac&$ "t$a# "tat$ "&ortl# aft$r on$ "$con+ To corr$ct t&i"1 #ou n$$ to c&an!$ t&$ 'aram$t$r" of t&$ "imulation it"$lf+ In t&$ mo$l %ino%1 "$l$ct Param$t$r" from t&$ Simulation m$nu+ You %ill "$$ t&$ follo%in! ialo! *o.+ ;4 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$r$ ar$ man# "imulation 'aram$t$r o'tion"C %$ %ill onl# *$ conc$rn$ %it& t&$ "tart an "to' tim$"1 %&ic& t$ll Simulin- o($r %&at tim$ '$rio to '$rform t&$ "imulation+ C&an!$ Start tim$ from 0+0 to 0+? 0"inc$ t&$ "t$' o$"nHt occur until tK1+0+ C&an!$ Sto' tim$ from 10+0 to 5+01 %&ic& "&oul *$ onl# "&ortl# aft$r t&$ "#"t$m "$ttl$"+ Clo"$ t&$ ialo! *o. an r$run t&$ "imulation+ Aft$r &ittin! t&$ auto"cal$ *utton1 t&$ "co'$ %ino% "&oul 'ro(i$ a muc& *$tt$r i"'la# of t&$ "t$' r$"'on"$ a" "&o%n *$lo%+ ;; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC B$"%:"); S*+'.#+ In t&i" "$ction1 #ou %ill l$arn &o% to *uil "#"t$m" in Simulin- u"in! t&$ *uilin! *loc-" in Simulin-H" Bloc- Li*rari$"+ You %ill *uil t&$ follo%in! "#"t$m+ 2ir"t #ou %ill !at&$r all t&$ n$c$""ar# *loc-" from t&$ *loc- li*rari$"+ T&$n #ou %ill moif# t&$ *loc-" "o t&$# corr$"'on to t&$ *loc-" in t&$ $"ir$ mo$l+ 2inall#1 #ou %ill conn$ct t&$ *loc-" %it& lin$" to form t&$ com'l$t$ "#"t$m+ Aft$r t&i"1 #ou %ill "imulat$ t&$ com'l$t$ "#"t$m to ($rif# t&at it %or-"+ G&'8./"); B%(=4+ 2ollo% t&$ "t$'" *$lo% to coll$ct t&$ n$c$""ar# *loc-"= U Cr$at$ a n$% mo$l 0N$% from t&$ 2il$ m$nu or Ctrl/N3+ You %ill !$t a *lan- mo$l %ino%+ ;< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U Clic- on t&$ Li*rar# Bro%"$r *utton to o'$n t&$ Simulin- Li*rar# Bro%"$r+ Clic- on t&$ Sourc$" o'tion un$r t&$ $.'an$ Simulin- titl$ to r$($al 'o""i*l$ "ourc$" for t&$ mo$l+ ;7 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U Dra! t&$ St$' *loc- from t&$ "ourc$" %ino% into t&$ l$ft "i$ of #our mo$l %ino%+ ;? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U 2rom t&$ Simulin- Li*rar# Bro%"$r1 ra! t&$ Sum an :ain from EMat& O'$ration"E o'tion foun un$r t&$ Simulin- titl$+ U S%itc& to t&$ EContinuou"E o'tion an ra! t%o in"tanc$" of t&$ Tran"f$r 2cn 0ra! it t%o tim$"3 into #our mo$l %ino% arran!$ a''ro.imat$l# a" "&o%n *$lo%+ T&$ $.act ali!nm$nt i" not im'ortant "inc$ it can *$ c&an!$ ;@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC lat$r+ Yu"t tr# to !$t t&$ corr$ct r$lati($ 'o"ition"+ Notic$ t&at t&$ "$con Tran"f$r 2unction *loc- &a" a 1 aft$r it" nam$+ Sinc$ no t%o *loc-" ma# &a($ t&$ "am$ nam$1 Simulin- automaticall# a''$n" num*$r" follo%in! t&$ nam$" of *loc-" to iff$r$ntiat$ *$t%$$n t&$m+ U Clic- on t&$ ESin-"E o'tion t&$n ra! o($r t&$ ESco'$E icon <0 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC M(:"5* B%(=4+ 2ollo% t&$"$ "t$'" to 'ro'$rl# moif# t&$ *loc-" in #our mo$l+ U Dou*l$/clic- #our Sum *loc-+ Sinc$ #ou %ill %ant t&$ "$con in'ut to *$ "u*tract$1 $nt$r T/ into t&$ li"t of "i!n" fi$l+ Clo"$ t&$ ialo! *o.+ U Dou*l$/clic- #our :ain *loc-+ C&an!$ t&$ !ain to 5+; an clo"$ t&$ ialo! *o.+ U Dou*l$/clic- t&$ l$ftmo"t Tran"f$r 2unction *loc-+ C&an!$ t&$ num$rator to W1 5X an t&$ $nominator to W1 0X+ Clo"$ t&$ ialo! *o.+ U Dou*l$/clic- t&$ ri!&tmo"t Tran"f$r 2unction *loc-+ L$a($ t&$ num$rator W1X1 *ut c&an!$ t&$ $nominator to W1 5 4X+ Clo"$ t&$ ialo! *o.+ Your mo$l "&oul a''$ar a"= <1 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U C&an!$ t&$ nam$ of t&$ fir"t Tran"f$r 2unction *loc- *# clic-in! on t&$ %or" ETran"f$r 2cnE+ A *o. an an $itin! cur"or %ill a''$ar on t&$ *loc-H" nam$ a" "&o%n *$lo%+ U"$ t&$ -$#*oar 0t&$ mou"$ i" al"o u"$ful3 to $l$t$ t&$ $.i"tin! nam$ an t#'$ in t&$ n$% nam$1 EPI Controll$rE+ Clic- an#%&$r$ out"i$ t&$ nam$ *o. to fini"& $itin!+ <5 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U Similarl#1 c&an!$ t&$ nam$ of t&$ "$con Tran"f$r 2unction *loc- from ETran"f$r 2cn1E to EPlantE+ No%1 all t&$ *loc-" ar$ $nt$r$ 'ro'$rl#+ Your mo$l "&oul a''$ar a"= C()).='"); B%(=4+ 6"'8 L").+ No% t&at t&$ *loc-" ar$ 'ro'$rl# lai out1 #ou %ill no% conn$ct t&$m to!$t&$r+ 2ollo% t&$"$ "t$'"+ U Dra! t&$ mou"$ from t&$ out'ut t$rminal of t&$ St$' *loc- to t&$ u''$r 0'o"iti($3 in'ut of t&$ Sum *loc-+ L$t !o of t&$ mou"$ *utton onl# %&$n t&$ mou"$ i" ri!&t on t&$ in'ut t$rminal+ Do not %orr# a*out t&$ 'at& #ou follo% %&il$ ra!!in!1 t&$ lin$ %ill rout$ it"$lf+ You "&oul "$$ t&$ follo%in!+ <6 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ r$"ultin! lin$ "&oul &a($ a fill$ arro%&$a+ If t&$ arro%&$a i" o'$n1 a" "&o%n *$lo%1 it m$an" it i" not conn$ct$ to an#t&in!+ You can continu$ t&$ 'artial lin$ #ou Au"t r$% *# tr$atin! t&$ o'$n arro%&$a a" an out'ut t$rminal an ra%in! Au"t a" *$for$+ Alt$rnati($l#1 if <4 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC #ou %ant to r$ra% t&$ lin$1 or if t&$ lin$ conn$ct$ to t&$ %ron! t$rminal1 #ou "&oul $l$t$ t&$ lin$ an r$ra% it+ To $l$t$ a lin$ 0or an# ot&$r o*A$ct31 "im'l# clic- on it to "$l$ct it1 an &it t&$ $l$t$ -$#+ U Dra% a lin$ conn$ctin! t&$ Sum *loc- out'ut to t&$ :ain in'ut+ Al"o ra% a lin$ from t&$ :ain to t&$ PI Controll$r1 a lin$ from t&$ PI Controll$r to t&$ Plant1 an a lin$ from t&$ Plant to t&$ Sco'$+ You "&oul no% &a($ t&$ follo%in!+ U T&$ lin$ r$mainin! to *$ ra%n i" t&$ f$$*ac- "i!nal conn$ctin! t&$ out'ut of t&$ Plant to t&$ n$!ati($ in'ut of t&$ Sum *loc-+ T&i" lin$ i" iff$r$nt in t%o %a#"+ 2ir"t1 "inc$ t&i" lin$ loo'" aroun an o$" not "im'l# follo% t&$ "&ort$"t 0ri!&t/an!l$3 rout$ "o it n$$" to *$ ra%n in "$($ral "ta!$"+ S$con1 t&$r$ i" no out'ut t$rminal to "tart from1 "o t&$ lin$ &a" to ta' off of an $.i"tin! lin$+ To ta' off t&$ out'ut lin$1 &ol t&$ Ctrl -$# %&il$ ra!!in! t&$ mou"$ from t&$ 'oint on t&$ $.i"tin! lin$ %&$r$ #ou %ant to ta' off+ In t&i" ca"$1 "tart Au"t to t&$ ri!&t of t&$ Plant+ Dra! until #ou !$t to t&$ lo%$r l$ft corn$r of t&$ $"ir$ f$$*ac- "i!nal lin$ a" "&o%n *$lo%+ <; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC No%1 t&$ o'$n arro%&$a of t&i" 'artial lin$ can *$ tr$at$ a" an out'ut t$rminal+ Dra% a lin$ from it to t&$ n$!ati($ t$rminal of t&$ Sum *loc- in t&$ u"ual mann$r+ << ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U No%1 #ou %ill ali!n t&$ *loc-" %it& $ac& ot&$r for a n$at$r a''$aranc$+ Onc$ conn$ct$1 t&$ actual 'o"ition" of t&$ *loc-" o$" not matt$r1 *ut it i" $a"i$r to r$a if t&$# ar$ ali!n$+ To mo($ $ac& *loc-1 ra! it %it& t&$ mou"$+ T&$ lin$" %ill "ta# conn$ct$ an r$/rout$ t&$m"$l($"+ T&$ mil$" an corn$r" of lin$" can al"o *$ ra!!$ to iff$r$nt location"+ Startin! at t&$ l$ft1 ra! $ac& *loc- "o t&at t&$ lin$" conn$ctin! t&$m ar$ 'ur$l# &oriBontal+ Al"o1 aAu"t t&$ "'acin! *$t%$$n *loc-" to l$a($ room for "i!nal la*$l"+ You "&oul &a($ "om$t&in! li-$= U 2inall#1 #ou %ill 'lac$ la*$l" in #our mo$l to i$ntif# t&$ "i!nal"+ To 'lac$ a la*$l an#%&$r$ in #our mo$l1 ou*l$ clic- at t&$ 'oint #ou %ant t&$ la*$l to *$+ Start *# ou*l$ clic-in! a*o($ t&$ lin$ l$ain! from t&$ St$' *loc-+ You %ill !$t a *lan- t$.t *o. %it& an $itin! cur"or a" "&o%n *$lo% <7 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T#'$ an r in t&i" *o.1 la*$lin! t&$ r$f$r$nc$ "i!nal an clic- out"i$ it to $n $itin!+ U La*$l t&$ $rror 0$3 "i!nal1 t&$ control 0u3 "i!nal1 an t&$ out'ut 0#3 "i!nal in t&$ "am$ mann$r+ Your final mo$l "&oul a''$ar a"= <? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC U To "a($ #our mo$l1 "$l$ct Sa($ A" in t&$ 2il$ m$nu an t#'$ in an# $"ir$ mo$l nam$+ S"#$%&'"() No% t&at t&$ mo$l i" com'l$t$1 #ou can "imulat$ t&$ mo$l+ S$l$ct Start from t&$ Simulation m$nu to run t&$ "imulation+ Dou*l$/clic- on t&$ Sco'$ *loc- to (i$% it" out'ut+ ,it t&$ auto"cal$ *utton 0*inocular"3 an #ou "&oul "$$ t&$ follo%in!+ T&4"); @&/"&<%.+ 5/(# MATLAB In "om$ ca"$"1 'aram$t$r"1 "uc& a" !ain1 ma# *$ calculat$ in MATLAB to *$ u"$ in a Simulin- mo$l+ If t&i" i" t&$ ca"$1 it i" not n$c$""ar# to $nt$r t&$ r$"ult of t&$ MATLAB calculation ir$ctl# into Simulin-+ 2or $.am'l$1 "u''o"$ %$ calculat$ t&$ !ain in MATLAB in t&$ (aria*l$ N+ Emulat$ t&i" *# $nt$rin! t&$ follo%in! comman at t&$ MATLAB comman 'rom't+ NK5+;
T&i" (aria*l$ can no% *$ u"$ in t&$ Simulin- :ain *loc-+ In #our Simulin- mo$l1 ou*l$/clic- on t&$ :ain *loc- an $nt$r t&$ follo%in! in t&$ :ain fi$l+ N <@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Clo"$ t&i" ialo! *o.+ Notic$ no% t&at t&$ :ain *loc- in t&$ Simulin- mo$l "&o%" t&$ (aria*l$ N rat&$r t&an a num*$r+ No%1 #ou can r$/run t&$ "imulation an (i$% t&$ out'ut on t&$ Sco'$+ T&$ r$"ult "&oul *$ t&$ "am$ a" *$for$+ 70 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC No%1 if an# calculation" ar$ on$ in MATLAB to c&an!$ an# of t&$ (aria*l$" u"$ in t&$ Simulin- mo$l1 t&$ "imulation %ill u"$ t&$ n$% (alu$" t&$ n$.t tim$ it i" run+ To tr# t&i"1 in MATLAB1 c&an!$ t&$ !ain1 N1 *# $nt$rin! t&$ follo%in! at t&$ comman 'rom't+ NK; Start t&$ Simulin- "imulation a!ain1 *rin! u' t&$ Sco'$ %ino%1 an &it t&$ auto"cal$ *utton+ You %ill "$$ t&$ follo%in! out'ut %&ic& r$fl$ct" t&$ n$%1 &i!&$r !ain+ 71 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC B$"i$" (aria*l$"1 "i!nal" an $($n $ntir$ "#"t$m" can *$ $.c&an!$ *$t%$$n MATLAB an Simulin- S"#$%&'"() $+"); MAT LAB2 EAN( 2 15 S"#$%&'"() (5 S-/"); M&++ S*+'.# 7/"'"); M&'%&< F$)='"()+2 D&#-.: +-/"); +*+'.# In t&i" $.am'l$1 %$ %ill cr$at$ a Simulin- mo$l for a ma"" attac&$ to a "'rin! %it& a lin$ar am'in! forc$+ A ma"" on a "'rin! %it& a ($locit#/$'$nant am'in! forc$ an a tim$/ $'$nant forc$ actin! u'on it %ill *$&a($ accorin! to t&$ follo%in! $4uation= T&$ mo$l %ill *$ form$ aroun t&i" $4uation+ In t&i" $4uation1 HmH i" t&$ $4ui(al$nt ma"" of t&$ "#"t$mC HcH i" t&$ am'in! con"tantC an H-H i" t&$ con"tant for t&$ "tiffn$"" of t&$ "'rin!+ 2ir"t %$ %ant to r$arran!$ t&$ a*o($ $4uation "o t&at it i" in t$rm" of acc$l$rationC t&$n %$ %ill int$!rat$ to !$t t&$ $.'r$""ion" for ($locit# an 'o"ition+ R$arran!in! t&$ $4uation to accom'li"& t&i"1 %$ !$t= 75 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC To *uil t&$ mo$l1 %$ "tart %it& a H"t$'H *loc- an a H!ainH *loc-+ T&$ !ain *loc- r$'r$"$nt" t&$ ma""1 %&ic& %$ %ill *$ $4ual to ;+ D$ al"o -no% t&at %$ %ill n$$ to int$!rat$ t%ic$1 t&at %$ %ill n$$ to a t&$"$ $4uation" to!$t&$r1 an t&at t&$r$ ar$ t%o mor$ con"tant" to con"i$r+ T&$ am'in! con"tant HcH %ill act on t&$ ($locit#1 t&at i"1 aft$r t&$ fir"t int$!ration1 an t&$ con"tant H-H %ill act on t&$ 'o"ition1 or aft$r t&$ "$con int$!ration+ L$t c K 0+6; an l$t - K 0+;+ La#in! all t&$"$ *loc- out to !$t an i$a of &o% to 'ut t&$m to!$t&$r1 %$ !$t= B# loo-in! at t&$ $4uation in t$rm" of acc$l$ration1 it i" cl$ar t&at t&$ am'in! t$rm an "'rin! t$rm ar$ "umm$ n$!ati($l#1 %&il$ t&$ ma"" t$rm i" "till 'o"iti($+ To a 'lac$" an c&an!$ "i!n" of t$rm" *$in! "umm$1 ou*l$/clic- on t&$ "um function *loc- an $it t&$ li"t of "i!n"= 76 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Onc$ %$ &a($ a$ 'lac$" an corr$ct$ t&$ "i!n" for t&$ "um *loc-1 %$ n$$ onl# conn$ct t&$ lin$" to t&$ir a''ro'riat$ 'lac$"+ To *$ a*l$ to "$$ %&at i" &a''$nin! %it& t&i" "'rin! "#"t$m1 %$ a a H"co'$H *loc- an a it a" follo%"= 74 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC T&$ (alu$" of HmH1 HcH an H-H can *$ alt$r$ to t$"t ca"$" of un$r/am'in!1 critical/am'in! an o($r/am'in!+ To accurat$l# u"$ t&$ "co'$1 ri!&t/clic- t&$ !ra'& an "$l$ct EAuto"cal$E+ T&$ ml/fil$ can no% *$ "a($+ T&$ follo%in! i" a "am'l$ out'ut %&$n t&$ mo$l i" run for 60 it$ration"+ 7; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC 7< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EANO216 S"#$%&'"() (5 A"/-=():"'"()"); (5 & 8($+. Air Conitionin! of a ,ou"$= Simulation of Room ,$at$r T&i" illu"trat$" &o% %$ can u"$ Simulin- to cr$at$ t&$ Air Conitionin! of a &ou"$ / Room ,$at$r+ T&i" "#"t$m $'$n" on t&$ outoor $n(ironm$nt1 t&$ t&$rmal c&aract$ri"tic" of t&$ &ou"$1 an t&$ &ou"$ &$atin! "#"t$m+ T&$ airZconition1+m fil$ initialiB$" ata in t&$ mo$l %or-"'ac$+ To ma-$ c&an!$"1 %$ can $it t&$ mo$l %or-"'ac$ ir$ctl# or $it t&$ m/fil$ an r$/loa t&$ mo$l %or-"'ac$+ O'$nin! t&$ Mo$l In t&$ MATLAB %ino%1 loa t&$ mo$l *# $.$cutin! t&$ follo%in! co$ 0"$l$ct t&$ co$ an 'r$"" 2@ to $(aluat$ "$l$ction3+ mlK[airZconition01[C o'$nZ"#"t$m0ml3C T&$ ,ou"$ ,$atin! Mo$l M(:.% I)"'"&%"I&'"() D&$n t&$ mo$l i" o'$n$1 it loa" t&$ information a*out t&$ &ou"$ from t&$ airZconition1+m fil$+ T&$ M/fil$ o$" t&$ follo%in!= D$fin$" t&$ &ou"$ !$om$tr# 0"iB$1 num*$r of %ino%"3 S'$cifi$" t&$ t&$rmal 'ro'$rti$" of &ou"$ mat$rial" Calculat$" t&$ t&$rmal r$"i"tanc$ of t&$ &ou"$ Pro(i$" t&$ &$at$r c&aract$ri"tic" 0t$m'$ratur$ of t&$ &ot air1 flo%/ rat$3 D$fin$" t&$ co"t of $l$ctricit# 0R"+4+00)-D&r3 S'$cifi$" t&$ initial room t$m'$ratur$ 010 $!+ C$l"iu" K ;0 $!+ 2a&r$n&$it3 Not$= Tim$ i" !i($n in unit" of &our"+ C$rtain 4uantiti$"1 li-$ air flo%/rat$1 ar$ $.'r$""$ '$r &our 0not '$r "$con3+ M(:.% C(#-().)'+ S.' P(")' 77 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ES$t PointE i" a con"tant *loc-+ It "'$cifi$" t&$ t$m'$ratur$ t&at mu"t *$ maintain$ inoor"+ It i" "$t at ?< $!r$$" 2a&r$n&$it %&ic& i" $4ual to 60 $!r$$" C$nti!ra$+ B# $fault+ T$m'$ratur$" ar$ !i($n in 2a&r$n&$it1 *ut t&$n ar$ con($rt$ to C$l"iu" to '$rform t&$ calculation"+
T8./#(+'&' ET&$rmo"tatE i" a "u*"#"t$m t&at contain" a R$la# *loc-+ T&$ t&$rmo"tat allo%" fluctuation" of ; $!r$$" 2a&r$n&$it a*o($ or *$lo% t&$ $"ir$ room t$m'$ratur$+ If air t$m'$ratur$ ro'" *$lo% ?1 $!r$$" 2a&r$n&$it1 t&$ t&$rmo"tat turn" on t&$ &$at$r+ D$ can "$$ t&$ T&$rmo"tat "u*"#"t$m *# t&$ follo%in! comman in MATLAB Comman %ino%+ o'$nZ"#"t$m0Wml1H)T&$rmo"tatHX3C
H.&'./ E,$at$rE i" a "u*"#"t$m t&at &a" a con"tant air flo% rat$1 EMotE1 %&ic& i" "'$cifi$ in t&$ airZconition+m M/fil$+ T&$ t&$rmo"tat "i!nal turn" t&$ &$at$r on or off+ D&$n t&$ &$at$r i" on1 it *lo%" &ot air at t$m'$ratur$ T,$at$r 0;0 $!r$$" C$l"iu" K 155 $!r$$" 2a&r$n&$it *# $fault3 at a con"tant flo% rat$ of Mot 01-!)"$c K 6<00-!)&r *# $fault3+ T&$ &$at flo% into t&$ room i" $.'r$""$ *# t&$ E4uation 1+ E4uation 1= 0\)t3 K 0T &$at$r ] T room 3^Mot^c %&$r$ c i" t&$ &$at ca'acit# of air at con"tant 'r$""ur$+ D$ can "$$ t&$ ,$at$r "u*"#"t$m *# t&$ follo%in! comman in MATLAB Comman %ino%+ o'$nZ"#"t$m0Wml1H),$at$rHX3C C(+' C&%=$%&'(/ ECo"t CalculatorE i" a :ain *loc-+ ECo"t CalculatorE int$!rat$" t&$ &$at flo% o($r tim$ an multi'li$" it *# t&$ $n$r!# co"t+ T&$ co"t of &$atin! i" 'lott$ in t&$ EPlotR$"ult"E "co'$+ H($+. E,ou"$E i" a "u*"#"t$m t&at calculat$" room t$m'$ratur$ (ariation"+ It ta-$" into con"i$ration t&$ &$at flo% from t&$ &$at$r an &$at lo""$" to t&$ $n(ironm$nt+ ,$at lo""$" an t&$ t$m'$ratur$ tim$ $ri(ati($ ar$ $.'r$""$ *# E4uation 5+ E4uation 5 0\)t3 lo""$" K0T room ] T out 3 ) R$4 %&$r$ R$4 i" t&$ $4ui(al$nt t&$rmal r$"i"tanc$ of t&$ &ou"$+ 7? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC D$ can "$$ t&$ ,ou"$ "u*"#"t$m *# t&$ follo%in! comman in MATLAB Comman %ino%+ o'$nZ"#"t$m0Wml1H),ou"$HX3C M(:.%"); '8. E)?"/()#.)' D$ mo$l t&$ $n(ironm$nt a" a &$at "in- %it& infinit$ &$at ca'acit# an tim$ (ar#in! t$m'$ratur$ Tout+ T&$ con"tant *loc- EA(! Outoor T$m'E "'$cifi$" t&$ a($ra!$ air t$m'$ratur$ outoor"+ T&$ EDail# T$m' 9ariationE Sin$ Da($ *loc- !$n$rat$" ail# t$m'$ratur$ fluctuation" of outoor t$m'$ratur$+ D$ can (ar# t&$"$ 'aram$t$r" an "$$ &o% t&$# aff$ct t&$ &$atin! co"t"+ R$))"); '8. S"#$%&'"() &): @"+$&%"I"); '8. R.+$%'+ D$ can run t&$ "imulation an (i"ualiB$ t&$ r$"ult"+ O'$n t&$ EPlotR$"ult"E "co'$ to (i"ualiB$ t&$ r$"ult"+ T&$ &$at co"t an inoor ($r"u" outoor t$m'$ratur$" ar$ 'lott$ on t&$ "co'$+ T&$ t$m'$ratur$ outoor (ari$" "inu"oiall#1 %&$r$a" t&$ inoor" t$m'$ratur$ i" maintain$ %it&in ; $!r$$" 2a&r$n&$it of ES$t PointE+ Tim$ a.i" i" la*$l$ in &our"+ $(alc0H"im0ml3H3C o'$nZ"#"t$m0Wml H)PlotR$"ult"HX31
R$mar-" T&i" 'articular mo$l i" $"i!n$ to calculat$ t&$ &$atin! co"t" onl#+ If t&$ t$m'$ratur$ of t&$ out"i$ air i" &i!&$r t&an t&$ room t$m'$ratur$1 t&$ room t$m'$ratur$ %ill $.c$$ t&$ $"ir$ ES$t Point8+ 7@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC EANO2 1D CAM &): FOLLO7ER SYSTEM A cam an follo%$r "#"t$m i" "#"t$m)m$c&ani"m t&at u"$" a cam an follo%$r to cr$at$ a "'$cific motion+ T&$ cam i" in mo"t ca"$" m$r$l# a flat 'i$c$ of m$tal t&at &a" &a an unu"ual "&a'$ or 'rofil$ mac&in$ onto it+ T&i" cam i" attac&$ to a "&aft %&ic& $na*l$" it to *$ turn$ *# a''l#in! a turnin! action to t&$ "&aft+ A" t&$ cam rotat$" it i" t&$ 'rofil$ or "&a'$ of t&$ cam t&at cau"$" t&$ follo%$r to mo($ in a 'articular %a#+ T&$ mo($m$nt of t&$ follo%$r i" t&$n tran"mitt$ to anot&$r m$c&ani"m or anot&$r 'art of t&$ m$c&ani"m+
E.aminin! t&$ ia!ram "&o%n a*o($ %$ can "$$ t&at a" "om$ $.t$rnal turnin! forc$ i" a''li$ to t&$ "&aft 0for $.am'l$= *# motor or *# &an3 t&$ cam rotat$" %it& it+ T&$ follo%$r i" fr$$ to mo($ in t&$ Y 'lan$ *ut i" una*l$ to mo($ in t&$ ot&$r t%o "o a" t&$ lo*$ of t&$ cam 'a""$" t&$ $!$ of t&$ follo%$r it cau"$" t&$ follo%$r to mo($ u'+ T&$n "om$ $.t$rnal o%n%ar forc$ 0u"uall# a "'rin! an !ra(it#3 'u"&$" t&$ follo%$r o%n ma-in! it -$$' contact %it& t&$ cam+ T&i" $.t$rnal forc$ i" n$$$ to -$$' t&$ follo%$r in contact %it& t&$ cam 'rofil$+ Di"'lac$m$nt Dia!ram"= ?0 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Di"'lac$m$nt ia!ram" ar$ m$r$l# a 'lot of t%o iff$r$nt i"'lac$m$nt" 0i"tanc$"3+ T&$"$ t%o i"'alc$m$nt" ar$= 1+ t&$ i"tanc$ tra($ll$ u' or o%n *# t&$ follo%$r an 5+ t&$ an!ular i"'lac$m$nt 0i"tanc$3 rotat$ *# t&$ cam
In t&$ ia!ram "&o%n o''o"it$ %$ can "$$ t&$ t%o iff$r$nt i"'lac$m$nt" r$'r$"$nt$ *# t&$ t%o iff$r$nt arro%"+ T&$ !r$$n arro% r$'r$"$ntin! t&$ i"'lac$m$nt of t&$ follo%$r i+$+ t&$ i"tanc$ tra($ll$ u' or o%n *# t&$ follo%$r+ T&$ mu"tar arro% 0cur($ arro%3 "&o%" t&$ an!ular i"'lac$m$nt tra($ll$ *# t&$ cam+ Not$= An!ular i"'lac$m$nt i" t&$ an!l$ t&rou!& %&ic& t&$ cam &a" rotat$+ If %$ $.amin$ t&$ ia!ram "&o%n *$lo% %$ can "$$ t&$ r$lation"&i' *$t%$$n a i"'lac$m$nt ia!ram an t&$ actual 'rofil$ of t&$ cam+ Not$ onl# &alf of t&$ i"'lac$m$nt ia!ram i" ra%n *$cau"$ t&$ "$con &alf of t&$ ia!ram i" t&$ "am$ a" t&$ fir"t+ T&$ ia!ram i" corr$ct from a t&$or$tical 'oint of (i$% *ut %oul &a($ to c&an!$ "li!&tl# if t&$ cam %a" to *$ actuall# ma$ an u"$+ D$ %ill con"i$r t&i" a littl$ mor$ in t&$ t&$ follo%in! "$ction / Uniform 9$locit#+ ?1 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC
Uniform 9$locit#= Uniform 9$locit# m$an" tra($llin! at a con"tant "'$$ in a fi.$ ir$ction an a" lon! a" t&$ "'$$ or ir$ction onHt c&an!$ t&$n it" uniform ($locit#+ In r$lation to cam an follo%$r "#"t$m"1 uniform ($locit# r$f$r" to t&$ motion of t&$ follo%$r+ No% l$tH" con"i$r a t#'ical i"'lac$m$nt ia!ram %&ic& i" m$r$l# a 'lot of t%o iff$r$nt i"'lac$m$nt" 0i"tanc$"3+ T&$"$ t%o i"'lac$m$nt" ar$= 1+ t&$ i"tanc$ tra($ll$ u' or o%n *# t&$ follo%$r an 5+ t&$ an!ular i"'lac$m$nt 0i"tanc$3 of t&$ cam L$t u" con"i$r t&$ ca"$ of a cam im'artin! a uniform ($locit# on a follo%$r o($r a i"'lac$m$nt of 60mm for t&$ fir"t &alf of it" c#cl$+ D$ "&all ta-$ t&$ c#cl$ in "t$'"+ 2ir"tl# if t&$ cam &a" to im'art a i"'lac$m$nt of 60mm on follo%$r o($r &alf it" c#cl$ t&$n it mu"t im'art a i"'lac$m$nt of 60mm_1?0Q for $($r# 1Q turn$ *# t&$ cam i+$+ it mu"t mo($ t&$ follo%$r 0+1<7mm '$r $!r$$ turn+ T&i" i"tanc$ i" to muc& to "mall to ra% on a i"'lac$m$nt ia!ram "o %$ %ill con"i$r t&$ i"'lac$m$nt of t&$ follo%$r at t&$ "tart1 at t&$ $n of t&$ &alf c#cl$1 t&$ $n of t&$ full c#cl$ an at c$rtain ot&$r int$r(al" 0t&$"$ int$r(al" or t&$ l$n!t& of t&$"$ int$r(al" %ill *$ $ci$ on lat$r3+
?5 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC
A);%. '8. =&# 8&+ /('&'.: '8/($;8 D"+'&)=. #(?.: <* '8. 5(%%(6./ S'&/' (5 '8. C*=%. 0Q 0mm E): (5 5"/+' H&%5 (5 '8. C*=%. 1?0Q 60mm E): (5 '8. F$%% C*=%. 6<0Q 0mm D$ "&all con"i$r t&i" in t$rm" of a i"'lac$m$nt ia!ram= 2ir"t %$ %ill 'lot t&$ !ra'&+ B$for$ oin! t&i" %$ mu"t fir"t con"i$r t&$ incr$m$nt" t&at %$ %ill u"$+ D$ %ill u"$ millim$t$r" for t&$ follo%$r i"'lac$m$nt incr$m$nt" an *$cau"$ 1Q i" too "mall %$ %ill u"$ incr$m$nt" of 60Q for t&$ an!ular i"'lac$m$nt+ Onc$ t&i" i" on$ t&$n %$ can ra% t&$ i"'lac$m$nt ia!ram a" "&o%n *$lo%+ Not$ a "trai!&t lin$ from t&$ i"'lac$m$nt of t&$ follo%$r at t&$ "tart of t&$ motion to t&$ i"'lac$m$nt of t&$ follo%$r at t&$ $n of t&$ motion r$'r$"$nt" uniform ($locit#+ D"+-%&=.#.)' D"&;/&# 5(/ U)"5(/# @.%(="'* Sim'l$ ,armonic Motion= 2or t&i" t#'$ of motion t&$ follo%$r i"'lac$m$nt o$" not c&an!$ at a con"tant rat$+ In ot&$r %or" t&$ follo%$r o$"nHt tra($l at con"tant "'$$+ T&$ *$"t %a# to un$r"tan t&i" non/uniform motion i" to ima!in$ a "im'l$ '$nulum "%in!in!+
Uniform Acc$l$ration an R$taration= T&i" motion i" u"$ %&$r$ t&$ follo%$r i" r$4uir$ to ri"$ or fall %it& uniform acc$l$ration1 t&at i" it" ($locit# i" c&an!in! at a con"tant rat$+ ?6 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC To conclu$ t&i"= A cam can im'art t&r$$ t#'$" of motion on it" follo%$r= Uniform ($locit# Sim'l$ &armonic motion Uniform acc$l$ration an r$taration Eac& of t&$"$ motion" can *$ r$'r$"$nt$ *# a i"'lac$m$nt ia!ram+ ?4 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ?; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ?< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ?7 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ?? ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC ?@ ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @0 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @1 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC Sim'l# "u''ort$ *$am= @5 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @6 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @4 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @; ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @< ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @7 ME1404 COMPUTER AIDED SIMULATION AND ANALYSIS LAB REC @?