Scribd
Upload
84 views

GreenPacket USB Configuration

This document provides instructions for configuring a GreenPacket USB device, which includes installing the WiMAX Connection Manager software, configuring the device settings using the WiMAX Connection Administrator application, and ensuring the Connection Manager is not running during configuration. Key settings like network passwords may require an additional scrambling tool. Once configuration is complete, the device can connect to WiMAX networks.

Uploaded by

Nar Kaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

GreenPacket USB Configuration

This document provides instructions for configuring a GreenPacket USB device, which includes installing the WiMAX Connection Manager software, configuring the device settings using the WiMAX Connection Administrator application, and ensuring the Connection Manager is not running during configuration. Key settings like network passwords may require an additional scrambling tool. Once configuration is complete, the device can connect to WiMAX networks.

Uploaded by

Nar Kaji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

1 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B

This Manual will guide through the Configuration of the


GreenPacket USB (newer version, without the h in the label sticker)
1. Install the WiMAX Connection Manager that comes in the device and usually, is automatically
installed when the device is connected for the first time to the computer.

2. If it does not install automatically, install in manually by double clicking the SetupLoader.exe file





2 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B








3 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B





3. To complete the installation, hit the Finish button. The Connection Manager will show up in the
Start menu. For device configuration, do not start this application!!!



4 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B



4. For configuring the CPE, WiMAX Connection Administrator application is required.
(Filename: WiMAXCA.exe)

5. Make sure that the WiMAX Connection Manager is not running!!!
Double click the WiMAXCA.exe file and change the configurations as shown in the required tabs:





5 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B



6. For the password, the Airspan Password Scrambler tool might be required.













6 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B



7. When the configuration is saved, it completes the CPE configuration and the CPE can be used to
connect to the NT WiMAX Network.



7 | P a g e C o n f i g u r a t i o n o f G r e e n P a c k e t U S B



8. For the general user, only installing the default application that comes in the device is sufficient.
(Provided that it has been configured with the above mentioned process)

You might also like